Which strategy for using medical and community masks? A prospective analysis of their environmental impact

IntroductionThe use of personal protective equipment, especially medical masks, increased dramatically during the COVID-19 crisis. Medical masks are made of synthetic materials, mainly polypropylene, and a majority of them are produced in China and imported to the European market. The urgency of the need has so far prevailed over environmental considerations.ObjectiveAssess the environmental impact of different strategies for the use of face mask.MethodA prospective analysis was conducted to assess the environmental impact of different strategies for the use of medical and community masks. Eight scenarios, differentiating the typologies of masks and the modes of reuse are compared using three environmental impact indicators: the Global Warming Potential (GWP100), the ecological scarcity (UBP method, from German ‘Umweltbelastungpunkte’) and the plastic leakage (PL). This study attempts to provide clear recommendations that consider both the environmental impact and the protective effectiveness of face masks used in the community.ResultsThe environmental impact of single-use masks is the most unfavourable, with a GWP of 0.4–1.3 kg CO2 eq., depending on the transport scenario, and a PL of 1.8 g, for a 1 month protection against COVID-19. The use of home-made cotton masks and prolonged use of medical masks through wait-and-reuse are the scenarios with the lowest impact.ConclusionThe use of medical masks with a wait and reuse strategy seems to be the most appropriate when considering both environmental impact and effectiveness. Our results also highlight the need to develop procedures and the legal/operational framework to extend the use of protective equipment during a pandemic.

Life cycle assessment of seabass and meagre in marine cage farming: From feeding plant to harvesting

Aquaculture is related to environmental impacts locally and globally. The purpose of this study was to identify environmental hotspots in fish feeds of various granulations in seabass and meagre farming, by using Life Cycle Assessment (LCA), given that recent studies suggested fish feed as the predominant factor affecting environmental impacts in marine fish farming. This, in turn enabled a detailed comparison of the environmental performance throughout the rearing cycle, in both species. LCA was applied on the production process of fish feeds taking into account the amount of raw materials, heat and energy needed for the production of feed. Similarly, LCA was applied in cage farms in Greece, involving the amount of feeds per size class, energy and fuel needed for the production of one tonne of seabass and meagre, respectively. The smaller size feed (SSF) class distributed to the fry, performed better compared to medium (MSF) and large size feed (LSF) classes provided to juveniles/adults, in relation to various environmental impact indicators. In medium and large size feeds, the main negative contributor was the use of sunflower meal, while small size feed affected these indicators through higher electricity demands and the inclusion of higher fishmeal level. The comparison between seabass and meagre revealed that meagre had significantly lower impact in all eighteen environmental impact indicators. This should be attributed to the reduced feed conversion ratio and the lower fry requirements compared to seabass. Improvements in cultivation methods of raw materials, optimized reductions in the inclusion of marine origin raw materials and improved feeding management could contribute to the overall ecological sustainability of the sector.

Analiza ETIS sustava pokazatelja za ocjenu i praćenje održivosti turizma u gradu Splitu, Hrvatska

ETIS is a tool that serves to improve the sustainability of the tourist destination, and the purpose of this research is to contribute to the application of this tool in the city of Split. The aim of the research was to determine the current situation and the possibilities of improvement by application of ETIS in Split. It was determined what data the City of Split is currently available for each indicator, and what additional existing data should be collected from other sources. Indicators that are not covered by the existing data need to be monitored by conducting survey questionnaires available in the ETIS toolkit. The analysis showed that the Environmental Impact indicators are the least covered by the existing data and it is primarily recommended to make an effort in collecting data within this group of indicators.

A PV-Powered TE Cooling System with Heat Recovery: Energy Balance and Environmental Impact Indicators

Over the past decades, clean and renewable energy has become a subject of great interest to both science and industry in response to the pollution caused by conventional energy sources. Its useful form should always meet the requirements of high performance and low environmental impact, while remaining within the scope of the expected functionality. The purpose of study presented in this paper was to determine the operational characteristics for a recently developed photovoltaic (PV)-powered thermoelectric (TE) cooling system with heat recovery. The characteristics of operation of the tested system were determined within the use of a specially developed measurement system. The conducted experimental research allowed describing the conditions of power supply for TE module using PV system, calculate the coefficient of performance (COP) for the whole TE cooling system with heat recovery and calculate the environmental impact indicators based on the material and energy balance used for life cycle assessment (LCA).