Quality of service performances of video and voice transmission in universal mobile telecommunications system network based on OPNET

The universal mobile telecommunications system (UMTS) has distinct benefits in that it supports a wide range of quality of service (QoS) criteria that users require in order to fulfill their requirements. The transmission of video and audio in real-time applications places a high demand on the cellular network, therefore QoS is a major problem in these applications. The ability to provide QoS in the UMTS backbone network necessitates an active QoS mechanism in order to maintain the necessary level of convenience on UMTS networks. For UMTS networks, investigation models for end-to-end QoS, total transmitted and received data, packet loss, and throughput providing techniques are run and assessed and the simulation results are examined. According to the results, appropriate QoS adaption allows for specific voice and video transmission. Finally, by analyzing existing QoS parameters, the QoS performance of 4G/UMTS networks may be improved.

Performance assessment of VoIP service over different handover mechanisms in UMTS networks

Many researchers have discussed various topics in universal mobile telecommunication system (UMTS) networks: the process of switching from one cell to another for the subscriber and the impact of the quality of the connection during the transition process, quality of services (QoS), the quality of the uplink and downlink carrier line, the various types of code for the voice transmitted through the Internet, especially the research that discussed voice over internet protocol (VoIP) technology as voice travels from cell to cell in mobile networks, depending on the type of delivery. In this paper, a proposed scenario of a UMTS network was implemented to evaluate the multicellular VoIP movement; the proposed UMTS network was simulated using the OPNET 14.5 simulator. The calculation and analysis of the different parameters of the user while moving from one cell to another with different movement speeds considered, the best mean opinion score (MOS) value (3.19) registered for the scenario (soft handover) comparing with another type of handover (3.00).

Optimized architecture for SNOW 3G

SNOW 3G is a synchronous, word-oriented stream cipher used by the 3GPP standards as a confidentiality and integrity algorithms. It is used as first set in long term evolution (LTE) and as a second set in universal mobile telecommunications system (UMTS) networks. The cipher uses 128-bit key and 128 bit IV to produce 32-bit ciphertext. The paper presents two techniques for performance enhancement. The first technique uses novel CLA architecture to minimize the propagation delay of the 2³² modulo adders. The second technique uses novel architecture for S-box to minimize the chip area. The presented work uses VHDL language for coding. The same is implemented on the FPGA device Virtex xc5vfx100e manufactured by Xilinx. The presented architecture achieved a maximum frequency of 254.9 MHz and throughput of 7.2235 Gbps.

Performance analysis of integrated WLAN-WiMAX-UMTS networks for multimedia applications

Next Generation Wireless networks (NGWN) are the integration of different types of available wireless networks. These integrated networks will provide seamless connectivity for multimedia user applications. Among various wireless networks, the networks such as Wireless Local Area network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX) and Universal Mobile Telecommunications System (UMTS) have their own unique characteristics and support for wide range of multimedia user applications. So, the integration of these networks and their performance analysis in respect of Quality of Service (QoS) is a major concern nowadays. Hence, this paper deals with the integration of WLAN, WiMAX and UMTS networks by considering QoS parameter. Further, the integration of these networks are analyzed with loose coupling and tight coupling architecture along with and without QoS. Furthermore, the performance analysis of the above mentioned integrated network for multimedia applications is also done. The simulation is performed through Opnet simulator.

Use of Ant Colony Optimization (ACO) for Post-Deployment Replanning of UMTS Networks

Inherent dynamism in user movement demands for post-deployment tuning of UMTS networks to minimize the total cost of ownership (TCO). Conventionally, UMTS operators so far have considered many-to-one mapping of RNCs to MSCs. However, such single-homed networks do not remain cost-effective over the passage of time, typically when subscribers later on begin to show specific mobility patterns such as diurnal movement. This necessitates topological extension of the network in terms of dual-homing of some selected RNCs to two MSCs simultaneously via direct fibre links, resulting in a many-to-two mapping in parts of the network. The aim of such selective dual-homing is to reduce handoff cost maximally at the expense of minimal increase in link cost, thereby reducing the TCO optimally. In this article, the authors have formulated the scenario as an integer linear programming problem, converted it into a state space search and then solved it using Ant Colony Optimization (ACO) technique. Compared to Simulated Annealing (SA) and Tabu Search (TS), ACO exhibits 10% to 15% improvement in solution quality.