ANNEALING TEMPERATURES’ EFFECTS ON MICROSTRUCTURE AND OPTICAL PROPERTIES OF Ba0.95Sr0.05TiO3 FILMS

ANNEALING TEMPERATURES’ EFFECTS ON MICROSTRUCTURE AND OPTICAL PROPERTIES OF Ba0.95Sr0.05TiO3 FILMS. Ferroelectric materials, one of which is Barium Strontium Titanate (BST), can be applied for photovoltaic. Ferroelectric films function as the P-type semiconductor in the P-N junction. BST (Ba0.95Sr0.05TiO3) films have been deposited on Pt/Si (111) and quartz substrates via the CSD method prepared by spin coater. The films were annealed at various temperatures of 800 °C, 900 °C, and 1000 °C to observe the annealing temperatures' effects on the microstructure and optical properties of the BST films. From the XRD results, the intensity of diffraction peaks gets higher along with the higher annealing temperature. It thus causes the level of crystallization and the crystal size of the Ba0.95Sr0.05TiO3 films to increase. The morphology results reveal that the grains size of the Ba0.95Sr0.05TiO3 films is getting larger with the higher annealing temperature. The optical properties examined in the Ba0.95Sr0.05TiO3 films include absorbance and bandgap energy values. Values of bandgap energy show a decrease with increasing sintering temperature. The smallest bandgap energy of the Ba0.95Sr0.05TiO3 film is achieved at 1000 °C of 3.20 eV. BST films were annealed at temperature 1000 °C attained from this study can be considered as candidate for a photovoltaic ferroelectric material.

Effects of thermal misfit strains on dielectric features of sandwich barium strontium titanate multilayer thin films on metal plates

Effects of thermal misfit strains on dielectric features for sandwich structural barium strontium titanate (BST) thin films on metal plates were investigated via a modified thermodynamic model. When TEC of substrates is closer to that of BST, larger permittivity and tunability can be received. The tendency of permittivities and tunabilities of such films as a function of TEC of substrates agrees with that of single compositional BST films and compositionally graded BST multilayer films. The highest tunability reaches 60% at the biasing field of 300 kV/cm when the films are onto Ti metal. Moreover, Ba[Formula: see text]Sr[Formula: see text]TiO3/Ba[Formula: see text]Sr[Formula: see text]TiO3/Ba[Formula: see text]Sr[Formula: see text]TiO3 structure can obtain higher tunability than Ba[Formula: see text]Sr[Formula: see text]TiO3/Ba[Formula: see text]Sr[Formula: see text]TiO3/Ba[Formula: see text]Sr[Formula: see text]TiO3 structure, while Ba[Formula: see text]Sr[Formula: see text]TiO3/Ba[Formula: see text]Sr[Formula: see text]TiO3/Ba[Formula: see text]Sr[Formula: see text]TiO3 films show better compatible composition range for relatively larger tunability. Dielectric properties of sandwich-like BST films in some references can also be analyzed based on our calculated results.

Termination switching of antiferromagnetic proximity effect in topological insulator

This work reports the ferromagnetism of topological insulator, (Bi,Sb)2Te3 (BST), with a Curie temperature of approximately 120 K induced by magnetic proximity effect (MPE) of an antiferromagnetic CrSe. The MPE was shown to be highly dependent on the stacking order of the heterostructure, as well as the interface symmetry: Growing CrSe on top of BST results in induced ferromagnetism, while growing BST on CrSe yielded no evidence of an MPE. Cr-termination in the former case leads to double-exchange interactions between Cr3+ surface states and Cr2+ bulk states. This Cr3+-Cr2+ exchange stabilizes the ferromagnetic order localized at the interface and magnetically polarizes the BST Sb band. In contrast, Se-termination at the CrSe/BST interface yields no detectable MPE. These results directly confirm the MPE in BST films and provide critical insights into the sensitivity of the surface state.