Cycle-to-Cycle NO and NOx Emissions From a HSDI Diesel Engine

2019 ◽  
Vol 141 (8) ◽  
Author(s):  
Felix Leach ◽  
Martin Davy ◽  
Mark Peckham
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Nox Emissions ◽  
Nox Formation ◽  
Reduction Techniques ◽  
Peak Cylinder Pressure ◽  
Crank Angle ◽  
The Difference ◽  
Hsdi Diesel Engine ◽  
Gas Recirculation

Engine-out NOx emissions from diesel engines continue to be a major topic of research interest. While substantial understanding has been obtained of engine-out (i.e., before any aftertreatment) NOx formation and reduction techniques, not least exhaust gas recirculation (EGR) which is now well established and fitted to production vehicles, much less data are available on cycle resolved NOx emissions. In this work, crank-angle resolved NO and NOx measurements have been taken from a high-speed light duty diesel engine at test conditions both with and without EGR. These have been combined with 1D data of exhaust flow, and this used to form a mass average of NO and NOx emissions per cycle. These results have been compared with combustion data and other emissions. The results show that there is a very strong correlation (R2 > 0.95) between the NOx emitted per cycle and the peak cylinder pressure of that cycle. In addition, the crank-angle resolved NO and NOx measurements also reveal that there is a difference in NO : NO2 ratio (where NO2 is assumed to be the difference between NO and NOx) during the exhaust period, with proportionally more NO2 being emitted during the blowdown period compared to the rest of the exhaust stroke.

Cycle-to-Cycle NO and NOx Emissions From a HSDI Diesel Engine

2018 ◽  
Author(s):  
Felix Leach ◽  
Martin Davy ◽  
Mark Peckham
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Nox Emissions ◽  
Nox Formation ◽  
Reduction Techniques ◽  
Light Duty ◽  
Peak Cylinder Pressure ◽  
Crank Angle ◽  
The Difference ◽  
Hsdi Diesel Engine

Engine-out NOx emissions from diesel engines continue to be a major topic of research interest. While substantial understanding has been obtained of engine-out (i.e. before any aftertreatment) NOx formation and reduction techniques, not least EGR which is now well established and fitted to production vehicles, much less data are available on cycle resolved NOx emissions. In this work, crank-angle resolved NO and NOx measurements have been taken from a high-speed light duty diesel engine at test conditions both with and without EGR. These have been combined with 1D data of exhaust flow and this used to form a mass average of NO and NOx emissions per cycle. These results have been compared with combustion data and other emissions. The results show that there is a very strong correlation (R2 > 0.95) between the NOx emitted per cycle and the peak cylinder pressure of that cycle. In addition, the crank-angle resolved NO and NOx measurements also reveal that there is a difference in NO : NO2 ratio (where NO2 is assumed to be the difference between NO and NOx) during the exhaust period, with proportionally more NO2 being emitted during the blowdown period compared to the rest of the exhaust stroke.

scholarly journals The Influence of Cycle-to-Cycle Hydrocarbon Emissions on Cyclic NO:NO2 Ratio From a HSDI Diesel Engine

2020 ◽  
Author(s):  
Felix Leach ◽  
Varun Shankar ◽  
Martin Davy ◽  
Mark Peckham
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Correlation Coefficients ◽  
Fast Response ◽  
Peak Cylinder Pressure ◽  
Crank Angle ◽  
Order Of Magnitude ◽  
Test Points ◽  
Hsdi Diesel Engine ◽  
Engine Cycle

Abstract Knowledge of the NO:NO2 ratio emitted from a diesel engine is particularly important for ensuring the highest performance of SCR NOx aftertreatment systems. As real driving emissions from vehicles increase in importance, the need to understand the NO:NO2 ratio emitted from a diesel engine during transient operation similarly increases. Previous work by the authors identified significant differences in NO:NO2 ratio throughout the exhaust period of a single engine cycle, with proportionally more NO2 being emitted during the blowdown period compared to the rest of the exhaust stroke. At the time it was not known what caused this effect. In this study, crank-angle resolved NO and NO2 measurements using fast response CLD (for NO) and a new fast LIF instrument (for NO2) have been taken from a single cylinder high-speed light duty diesel engine at three different speed and load points including a point with and without EGR. In addition, crank-angle resolved unburned hydrocarbon (UHC) measurements have been taken simultaneously using a fast FID. The NOx emitted per cycle and the peak cylinder pressure of that cycle have showed high correlation coefficients (R2 < 0.97 at all test points) in this work. In addition, a variation of the NO:NO2 ratio through the engine’s exhaust stroke is also observed indicative of in-cylinder stratification of NO and NO2. A new link between the NO:NO2 ratio and the UHC emissions from an individual engine cycle is observed — the results show that where there are higher levels of UHC emissions in the first part of the exhaust stroke (blowdown), perhaps caused by injector dribble or release from crevices, the proportion of NO2 emitted from that cycle is increased. This effect is observed and analysed across all test points and with and without EGR. The performance of the new fast LIF analyser has also been evaluated, in comparison with the previous state-of-the-art and standard “slow” emissions measurement apparatus showing a reduction in the noise of the measurement by an order of magnitude.

Modeling of NOx Emissions Using a Super-Extended Zel’dovich Mechanism

2003 ◽  
Author(s):  
Huateng Yang ◽  
Sundar R. Krishnan ◽  
Kalyan K. Srinivasan ◽  
K. Clark Midkiff
Keyword(s):  
Diesel Engine ◽  
Reaction Scheme ◽  
Combustion Model ◽  
Nox Emissions ◽  
Si Engine ◽  
Nox Formation ◽  
Natural Gas Engines ◽  
Lean Combustion ◽  
Temperature And Pressure ◽  
The Difference

A kinetic model for NOx production has been developed to predict NOx emissions. The reaction scheme is a modified super-extended Zel’dovich mechanism (SEZM), which includes 43 reactions and 20 species instead of just the three reactions typically used in the extended Zel’dovich mechanism. The NOx emissions predicted by both mechanisms are compared using two separate models. First, a theoretical investigation of the two mechanisms is made for an SI engine using prescribed temperature and pressure histories. Then each of the two mechanisms is combined with a phenomenological combustion model for a single-cylinder Caterpillar 3400 series diesel engine to calculate the NOx emissions. The predictions from both mechanisms are compared with experimental results. It is shown that the SEZM can predict NOx emissions more accurately than the extended Zel’dovich mechanism. Results show that the SEZM increases the predicted NOx by about 25 percent. The difference between the two models is more pronounced for lean combustion, in which NO2 and NH play an important role in the NOx formation. In addition, the effects of several parameters on diesel engine NOx production are investigated. The super-extended Zel’dovich mechanism for NOx formation is expected to be more appropriate for lean combustion, such as in diesel or natural gas engines and other engines that typically operate at lean conditions.

scholarly journals Prognostic Assessment of the Performance Parameters for the Industrial Diesel Engines Operated with Microalgae Oil

2021 ◽  
Vol 13 (11) ◽  
pp. 6482
Author(s):  
Sergejus Lebedevas ◽  
Laurencas Raslavičius
Keyword(s):  
Energy Efficiency ◽  
Diesel Engine ◽  
High Speed ◽  
Performance Parameters ◽  
Prognostic Assessment ◽  
High Speed Diesel ◽  
Microalgae Oil ◽  
The Difference ◽  
Smoke Opacity ◽  
Efficiency Indicators

A study conducted on the high-speed diesel engine (bore/stroke: 79.5/95.5 mm; 66 kW) running with microalgae oil (MAO100) and diesel fuel (D100) showed that, based on Wibe parameters (m and φz), the difference in numerical values of combustion characteristics was ~10% and, in turn, resulted in close energy efficiency indicators (ηi) for both fuels and the possibility to enhance the NOx-smoke opacity trade-off. A comparative analysis by mathematical modeling of energy and traction characteristics for the universal multi-purpose diesel engine CAT 3512B HB-SC (1200 kW, 1800 min−1) confirmed the earlier assumption: at the regimes of external speed characteristics, the difference in Pme and ηi for MAO100 and D100 did not exceeded 0.7–2.0% and 2–4%, respectively. With the refinement and development of the interim concept, the model led to the prognostic evaluation of the suitability of MAO100 as fuel for the FPT Industrial Cursor 13 engine (353 kW, 6-cylinders, common-rail) family. For the selected value of the indicated efficiency ηi = 0.48–0.49, two different combinations of φz and m parameters (φz = 60–70 degCA, m = 0.5 and φz = 60 degCA, m = 1) may be practically realized to achieve the desirable level of maximum combustion pressure Pmax = 130–150 bar (at α~2.0). When switching from diesel to MAO100, it is expected that the ηi will drop by 2–3%, however, an existing reserve in Pmax that comprises 5–7% will open up room for further optimization of energy efficiency and emission indicators.

CFD Modelling of the Effects of Injection Timing on the Combustion Process and Emissions in an HSDI Diesel Engine

2012 ◽  
Author(s):  
Raouf Mobasheri ◽  
Zhijun Peng
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Cfd Simulation ◽  
Direct Injection ◽  
Combustion Process ◽  
Injection Timing ◽  
Cfd Modelling ◽  
Combustion Modeling ◽  
Pressure Trace ◽  
Hsdi Diesel Engine

High-Speed Direct Injection (HSDI) diesel engines are increasingly used in automotive applications due to superior fuel economy. An advanced CFD simulation has been carried out to analyze the effect of injection timing on combustion process and emission characteristics in a four valves 2.0L Ford diesel engine. The calculation was performed from intake valve closing (IVC) to exhaust valve opening (EVO) at constant speed of 1600 rpm. Since the work was concentrated on the spray injection, mixture formation and combustion process, only a 60° sector mesh was employed for the calculations. For combustion modeling, an improved version of the Coherent Flame Model (ECFM-3Z) has been applied accompanied with advanced models for emission modeling. The results of simulation were compared against experimental data. Good agreement of calculated and measured in-cylinder pressure trace and pollutant formation trends were observed for all investigated operating points. In addition, the results showed that the current CFD model can be applied as a beneficial tool for analyzing the parameters of the diesel combustion under HSDI operating condition.

Numerical and Experimental Study on the Impact of Mild Cold EGR on Exhaust Emissions in a Biodiesel Fueled Diesel Engine

2021 ◽  
Author(s):  
Alex Oliveira ◽  
Junfeng Yang ◽  
Jose Sodre
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Exhaust Emissions ◽  
Pollutant Emissions ◽  
Cylinder Pressure ◽  
Nox Formation ◽  
Ratio Distribution ◽  
Engine Model ◽  
Gas Recirculation ◽  
The Impact

Abstract This work evaluated the effect of cooled exhaust gas recirculation (EGR) on fuel consumption and pollutant emissions from a diesel engine fueled with B8 (a blend of biodiesel and Diesel 8:92%% by volume), experimentally and numerically. Experiments were carried out on a Diesel power generator with varying loads from 5 kW to 35 kW and 10% of cold EGR ratio. Exhaust emissions (e.g. THC, NOX, CO etc.) were measured and evaluated. The results showed mild EGR and low biodiesel content have minor impact of engine specific fuel consumption, fuel conversion efficiency and in-cylinder pressure. Meanwhile, the combination of EGR and biodiesel reduced THC and NOX up to 52% and 59%, which shows promising effect on overcoming the PM-NOX trade-off from diesel engine. A 3D CFD engine model incorporated with detailed biodiesel combustion kinetics and NOx formation kinetics was validated against measured in-cylinder pressure, temperature and engine-out NO emission from diesel engine. This valid model was then employed to investigate the in-cylinder temperature and equivalence ratio distribution that predominate NOx formation. The results showed that the reduction of NOx emission by EGR and biodiesel is obtained by a little reduction of the local in-cylinder temperature and, mainly, by creating comparatively rich combusting mixture.

Multi-Valve High-Speed Direct Injection Diesel Engines—the Design Challenge

1993 ◽  
Vol 207 (4) ◽  
pp. 307-315
Author(s):  
I P Gilbert ◽  
A R Heath ◽  
I D Johnstone
Keyword(s):  
Diesel Engine ◽  
Fuel Economy ◽  
Cylinder Head ◽  
High Speed ◽  
Fuel Injection ◽  
Direct Injection ◽  
Selection Strategy ◽  
Design Challenge ◽  
Hsdi Diesel Engine ◽  
High Level

The need to increase power, to improve fuel economy and to meet stringent exhaust emissions legislation with a high level of refinement has provided a challenge for the design of a compact high-speed direct injection (HSDI) diesel engine. This paper describes various aspects of cylinder head design with particular consideration of layout and number of valves, valve actuation, port selection strategy, fuel injection systems and cylinder head construction.

Sign in / Sign up

Export Citation Format

Share Document