Unprecedented Biodegradable Cellulose-Derived Polyesters with Pendant Citronellol Moieties: From Monomer Synthesis to Enzymatic Degradation

Levoglucosenone (LGO) is a cellulose-derived molecule that is present commercially on a multi-ton/year scale. Taking advantage of the α,β-conjugated ketone of LGO, a new citronellol-containing 5-membered lactone (HBO-citro) was synthesized through a one-pot two-step pathway involving oxa-Michael addition and Baeyer-Villiger oxidation. The solvent-free treatment of HBO-citro with NaBH4 at room temperature led to the full reduction of the lactone moiety which gave a novel fully renewable triol monomer having a citronellol side chain (Triol-citro). Noticeably, by simply changing the reducing agent, temperature and reaction duration, the partial reduction of HBO-citro can be achieved to yield a mixture of 5- and 6-membered Lactol-citro molecules. Triol-citro was chosen to prepare functional renewable polyesters having citronellol pendant chains via polycondensation reactions with diacyl chlorides having different chain lengths. Good thermal stability (Td5% up to 170 °C) and low glass transition temperatures (as low as −42 °C) were registered for the polyesters obtained. The polymers were then hydrolyzed using a commercial lipase from Thermomyces lanuginosus (Lipopan® 50 BG) to assess their biodegradability. A higher degradation profile was found for the polyesters prepared using co-monomers (acyl chlorides) having longer chain lengths. This is likely due to the decreased steric hindrance around the ester bonds which allowed enhanced accessibility of the enzyme.

Fine Crystalline Mg-Al Hydrotalcites as Catalysts for Baeyer-Villiger Oxidation of Cyclohexanone with H2O2

The catalytic activity of Mg-Al hydrotalcite (HT) materials in base-catalyzed reactions is known to be promoted by the low crystallinity of the HT solid. In the present work, two routes enabling the preparation of finely crystalline Mg-Al HT materials were explored: (1) the inverse microemulsion technique, and (2) co-precipitation in the presence of starch. Carbonate, chloride and bromide forms of HT were prepared, examined with X-ray diffraction, scanning electron microscopy/energy dispersive X-ray spectroscopy and infrared spectroscopy, and used as catalysts in the Baeyer–Villiger oxidation of cyclohexanone to ε-caprolactone with a H2O2/acetonitrile system. The bromide forms proved significantly less active than the chlorides and carbonates, as they promoted nonselective consumption of H2O2. The fine crystalline materials were more active than the more crystalline HT references obtained by conventional co-precipitation. Catalysts prepared by inverse microemulsion were less crystalline and more active than the starch-templated ones, but suffered stronger deactivation by the acidic reaction environment. Alkalization of the reaction medium with NaHCO3 stabilized the HT materials and increased the ε-caprolactone yield, which became comparable for both types of fine crystalline catalysts—thus pointing to the synthesis involving a simple and cheap starch templating approach as being a particularly attractive one.

Immobilization of Baeyer-Villiger monooxygenase from acetone grown Fusarium sp.

ObjectiveA novel biocatalyst for Baeyer–Villiger oxidations is necessary for pharmaceutical and chemical industries, so this study aims to find a Baeyer–Villiger monooxygenase (BVMO) and to improve its stability by immobilization. ResultsAcetone, the simplest ketone, was selected as the only carbon source for the screening of microorganisms with a BVMO. A eukaryote, Fusarium sp. NBRC 109816, with a BVMO ( F BVMO), was isolated from a soil sample. F BVMO was overexpressed in E. coli and successfully immobilized by the organic-inorganic nanocrystal formation method. The immobilization improved the thermostability of F BVMO. Substrate specificity investigation revealed that both free and immobilized F BVMO were found to show catalytic activities not only for Baeyer–Villiger oxidation of ketones to esters but also for oxidation of sulfides to sulfoxides. Furthermore, a preparative scale reaction using immobilized F BVMO was successfully conducted. ConclusionsFBVMO was discovered from an environmental sample, overexpressed in E. coli , and immobilized by the organic-inorganic nanocrystal formation method. The immobilization successfully improved its thermostability.

“Exhaustive” Baeyer-Villiger Oxidation of Poly(Methyl Vinyl Ketone) and Its Copolymers

The development of “exhaustive” (nearly quantitative) post-modification reactions relies heavily on the efficiency of their corresponding small-molecule protocols. However, the direct translation of existing small-molecule protocols into post-polymerization modifications were often troublesome due to undesired side reactions. For example, the development of an “exhaustive” BaeyerVilliger (BV) post-modification using existing small-molecule BV protocols suffered from a lack of reactivity or significant chain scission. Herein, we demonstrate that a careful re-optimization of a small-molecule transformation on a polymer substrate allowed us to overcome such challenges, thereby enabling an “exhaustive” BV post-polymerization modification. Furthermore, a one-pot copolymerization/“exhaustive” BV post-modification procedure was developed to produce copolymers of vinyl acetate (VAc) and more activated monomers (MAMs) in a convenient and scalable manner. This user-friendly methodology provides a general access to synthetically challenging poly(VAc-co-MAM)s including both statistical and narrow-dispersed block copolymers and could greatly facilitate the exploration of applications with such materials.

Chemo-Enzymatic Baeyer–Villiger Oxidation Facilitated with Lipases Immobilized in the Supported Ionic Liquid Phase

A novel method for chemo-enzymatic Baeyer–Villiger oxidation of cyclic ketones in the presence of supported ionic liquid-like phase biocatalyst was designed. In this work, multi-walled carbon nanotubes were applied as a support for ionic liquids which were anchored to nanotubes covalently by amide or imine bonds. Next, lipases B from Candida antarctica, Candida rugosa, or Aspergillus oryzae were immobilized on the prepared materials. The biocatalysts were characterized using various techniques, like thermogravimetry, IR spectroscopy, XPS, elemental analysis, and SEM-EDS microscopy. In the proposed approach, a biocatalyst consisting of a lipase as an active phase allowed the generation of peracid in situ from the corresponding precursor and a green oxidant–hydrogen peroxide. The activity and stability of the obtained biocatalysts in the model oxidation of 2-adamantanone were demonstrated. High conversion of substrate (92%) was achieved under favorable conditions (toluene: n-octanoic acid ratio 1:1 = v:v, 35% aq. H2O2 2 eq., 0.080 g of biocatalyst per 1 mmol of ketone at 20 °C, reaction time 4 h) with four reaction cycles without a drop in its activity. Our ‘properties-by-design’ approach is distinguished by its short reaction time at low temperature and higher thermal stability in comparison with other biocatalysts presented in the literature reports.

“Exhaustive” Baeyer-Villiger Oxidation of Poly(Methyl Vinyl Ketone) and Its Copolymers

Poly(vinyl acetate) and its copolymers represent an important class of commodity polymers. However, the preparation of copolymers of vinyl acetate (VAc) and more activated monomers (MAMs) <i>via</i> copolymerization is greatly restricted due to their disparate reactivities. Issues relating to reactivity ratios remain a fundamental challenge in copolymerization. Herein, we describe a post-polymerization modification approach using poly(methyl vinyl ketone-<i>co</i>-MAM)s as substrates to access synthetically challenging poly(VAc-<i>co</i>-MAM)s. Although the direct translations of existing small-molecule Baeyer-Villiger (BV) protocols into a post-polymerization modification method failed, a mechanism-guided multi-parameter optimization on polymer substrates disclosed a set of unique “exhaustive” BV protocols which enabled a nearly quantitative functionalization without obvious chain scission or cross-linking. Furthermore, a one-pot copolymerization/“exhaustive” BV post-modification procedure was developed to produce such copolymers in a convenient and scalable manner. This user-friendly methodology is able to access diverse poly(VAc-<i>co</i>-MAM)s including both statistical and narrow-dispersed block copolymers and could greatly facilitate the exploration of applications with such materials.