ChemInform Abstract: Gold-Particle-Enhanced Crystallite Growth of Thin Films of Barium Titanate Prepared by the Sol-Gel Process.

This study investigated the structure, microstructure and optical properties of the highly-oriented lead barium titanate (Pb1-xBaxTiO3, PBT) thin films prepared on MgO (100) substrate by a nonaqueous sol-gel process. The film precursor was synthesized by the modified sol-gel processing from lead acetate, barium acetate, and titanium isopropoxide, acetylacetone as chelating agent, and ethylene glycol as solvent. This stable precursor was formed by acetylacetone chelating with titanium isopropoxide and then mixing the solution of the acetates. The spin-coating technique was used to deposit the PBT films on MgO (100) substrate with different barium contents and various spin-coating numbers, respectively. X-ray diffraction was employed to study the crystal structure of the thin film and field emission scanning electron microscopy was used to characterize the microstructure of the films. Optical properties of the thin films were investigated by Ultraviolet-visible spectrophotometer. All films exhibited a (100) preferred orientation, especially the PB0.5T (3-coating layers) thin film. In the optical properties, the adsorption wavelength shifted to the ultraviolet region with increasing barium.

Download Full-text

Characterization and microstructure of highly preferred oriented lead barium titanate thin films on MgO (100) by sol-gel process

Thin Solid Films ◽

10.1016/j.tsf.2005.12.139 ◽

2006 ◽

Vol 510 (1-2) ◽

pp. 55-61 ◽

Cited By ~ 15

Author(s):

Wein-Duo Yang ◽

Sossina M. Haile

Keyword(s):

Thin Films ◽

Barium Titanate ◽

Sol Gel ◽

Sol Gel Process ◽

Preferred Oriented

Download Full-text

The crystallization of thin-film ceramics

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100122095 ◽

1992 ◽

Vol 50 (1) ◽

pp. 338-339

Author(s):

J.M. Schwartz ◽

L.F. Francis ◽

L.D. Schmidt ◽

P.S. Schabes-Retchkiman

Keyword(s):

Thin Films ◽

Grain Size ◽

Sol Gel ◽

Processing Route ◽

Small Areas ◽

Ceramic Thin Films ◽

Complex Shapes ◽

Sol Gel Process ◽

Ceramic Precursors ◽

Crystalline Ceramic

Ceramic thin films and coatings are of interest for electrical, optical, magnetic and thermal barrier applications. Critical for improved properties in thin films is the development of specific microstructures during processing. To this end, the sol-gel method is advantageous as a versatile processing route. The sol-gel process involves depositing a solution containing metalorganic or colloidal ceramic precursors onto a substrate and heating the deposited layer to form a crystalline or non-crystalline ceramic coating. This route has several advantages, including the ability to create tailored microstructures and properties, to coat large or small areas, simple or complex shapes, and to more easily prepare multicomponent ceramics. Sol-gel derived coatings are amorphous in the as-deposited state and develop their crystalline structure and microstructure during heat-treatment. We are particularly interested in studying the amorphous to crystalline transformation, because many key features of the microstructure such as grain size and grain size distribution may be linked to this transformation.

Download Full-text

Epitaxial Growth of Sr0.3Ba0.7Nb2O6 Thin Films Prepared by Sol-Gel Process

MRS Proceedings ◽

10.1557/proc-606-181 ◽

1999 ◽

Vol 606 ◽

Cited By ~ 2

Author(s):

Keishi Nishio ◽

Jirawat Thongrueng ◽

Yuichi Watanabe ◽

Toshio Tsuchiya

Keyword(s):

Thin Film ◽

Thin Films ◽

Epitaxial Growth ◽

Raw Materials ◽

Substrate Surface ◽

Sol Gel ◽

Tungsten Bronze ◽

Monomethyl Ether ◽

Tetragonal Tungsten Bronze ◽

Sol Gel Process

AbstructWe succeeded in the preparation of strontium-barium niobate (Sr0.3Ba0.7Nb2O6 : SBN30)that have a tetragonal tungsten bronze type structure thin films on SrTiO3 (100), STO, or La doped SrTiO3 (100), LSTO, single crystal substrates by a spin coating process. LSTO substrate can be used for electrode. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)5 as raw materials, and acetic acid and diethylene glycol monomethyl ether as solvents. The coating thin films were sintered at temperature from 700 to 1000°C for 10 min in air. It was confirmed that the thin films on STO substrate sintered above 700°C were in the epitaxial growth because the 16 diffraction spots were observed on the pole figure using (121) reflection. The <130> and <310> direction of the thin film on STO were oriented with the c-axis in parallel to the substrate surface. However, the diffraction spots of thin film on LSTO substrate sintered at 700°C were corresponds to the expected pattern for (110).

Download Full-text

Effect of Annealing temperature on the Structural and Magnetic Properties of TbxY3-xFe5O12(x = 0.0, 1.0, 2.0) Thin Films Prepared by Sol-Gel Process

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.501.236 ◽

2012 ◽

Vol 501 ◽

pp. 236-241 ◽

Cited By ~ 1

Author(s):

Ftema W. Aldbea ◽

Noor Bahyah Ibrahim ◽

Mustafa Hj. Abdullah ◽

Ramadan E. Shaiboub

Keyword(s):

Thin Films ◽

Magnetic Properties ◽

Room Temperature ◽

Annealing Temperature ◽

Sol Gel ◽

Vibrating Sample Magnetometer ◽

X Ray ◽

Garnet Phase ◽

Sol Gel Process ◽

Amorphous Structures

Thin films nanoparticles TbxY3-xFe5O12 (x=0.0, 1.0, 2.0) were prepared by the sol-gel process followed by annealing process at various annealing temperatures of 700° C, 800° C and 900° C in air for 2 h. The results obtained from X-ray diffractometer (XRD) show that the films annealed below 900°C exhibit peaks of garnet mixed with small amounts of YFeO3 and Fe2O3. Pure garnet phase has been detected in the films annealed at 900°C. Before annealing the films show amorphous structures. The particles sizes measurement using the field emission scanning electron microscope (FE-SEM) showed that the particles sizes increased as the annealing temperature increased. The magnetic properties were measured at room temperature using the vibrating sample magnetometer (VSM). The saturation magnetization (Ms) of the films also increased with the annealing temperature. However, different behavior of coercivity (Hc) has been observed as the annealing temperature was increased.

Download Full-text