Preparation of silicon‐based soybean base oil by modified soybean oil by transesterification and hydrosilation

2021 ◽  
Author(s):  
Xiaobin Zhu ◽  
Zhi Yun ◽  
Xia Gui
Keyword(s):  
Soybean Oil ◽  
Base Oil ◽  
Modified Soybean Oil ◽  
Silicon Based

Purification of Stearidonic Acid from Modified Soybean Oil by Argentation Silica Gel Column Chromatography

2011 ◽  
Vol 88 (8) ◽  
pp. 1161-1171 ◽  
Author(s):  
Leslie Kleiner-Shuhler ◽  
Luis Vázquez ◽  
Casimir C. Akoh
Keyword(s):  
Soybean Oil ◽  
Silica Gel ◽  
Column Chromatography ◽  
Stearidonic Acid ◽  
Modified Soybean Oil

Preparation of thermoset composites from natural fibres and acrylate modified soybean oil resins

2009 ◽  
Vol 114 (4) ◽  
pp. 2502-2508 ◽  
Author(s):  
Dan Åkesson ◽  
Mikael Skrifvars ◽  
Pernilla Walkenström
Keyword(s):  
Soybean Oil ◽  
Natural Fibres ◽  
Thermoset Composites ◽  
Modified Soybean Oil

Lubricant Base Stocks from Modified Soybean Oil

2002 ◽  
Author(s):  
Hong-Sik Hwang ◽  
Sevim Erhan
Keyword(s):  
Soybean Oil ◽  
Modified Soybean Oil

Enzymatic Products from Modified Soybean Oil Containing Hydrazinoester

2008 ◽  
pp. 76-85 ◽  
Author(s):  
Atanu Biswas ◽  
R. L. Shogren ◽  
J. L. Willet ◽  
Sevim Z. Erhan ◽  
H. N. Cheng
Keyword(s):  
Soybean Oil ◽  
Modified Soybean Oil

scholarly journals Plasticization Effect of Bio-Based Plasticizers from Soybean Oil for Tire Tread Rubber

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 623 ◽  
Author(s):  
Haoshu Xu ◽  
Tao Fan ◽  
Neng Ye ◽  
Weidong Wu ◽  
Daye Huang ◽  
...  
Keyword(s):  
Soybean Oil ◽  
Crosslink Density ◽  
Plasticization Effect ◽  
Additive Content ◽  
Resistance Property ◽  
Modified Soybean Oil ◽  
Aging Resistance ◽  
Harmful Effects ◽  
Tread Rubber ◽  
Better Than

Modified soybean oil (MSO) is synthesized from soybean oil (SO) and sulfur, aiming to reduce the double bond quantity of SO and avoid harmful effects on the crosslink density and mechanical properties of rubber. MSO modified with different weight percentages of sulfur is then used to plasticize tire tread rubber (TR). It is found that the crosslink density and modulus of MSO- plasticized rubber are significantly improved compared with that of SO-plasticized TR. MSO modified with 6 wt % sulfur (MSO-6%) exhibits the best plasticization effect on TR, thus, the plasticization effect of MSO-6% on TR was further studied by adjusting its additive content. Thereafter, the Mooney viscosity, Payne effect, mechanical property of different amount of MSO-6% plasticized TR are studied to investigate their plasticization effect. At the same additive content of plasticizer, the plasticization effect of MSO-6% and a commonly used aromatic hydrocarbon plasticizer (AO) is compared to determine the potential application of MSO on tire tread rubber. It is found MSO shows similar plasticization effect on TR compared with AO. More important, the aging resistance property and wear resistance property of MSO-6% plasticized rubber are better than those of AO-plasticized rubber. Therefore, MSO-6% is a promising bio-based plasticizer for tire tread rubber.

Effect of boron-nitrogen modified soybean oil additive on biodegradability, anti-oxidation property, and lubricity of rapeseed oil

2019 ◽  
Vol 234 (2) ◽  
pp. 282-291 ◽  
Author(s):  
Ping Liu ◽  
Xin Wang ◽  
Jiang Wu ◽  
Wang Lin ◽  
Yanhan Feng ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Soybean Oil ◽  
Rapeseed Oil ◽  
Energy Dispersive Spectrometer ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Modified Soybean Oil ◽  
Wear And Friction ◽  
Friction Reducing ◽  
Boron Nitrogen

Two novel boron-nitrogen modified soybean oil additives with different length of chain structures (abbreviated as BNS1 and BNS2) were synthesized. The thermal stability of BNS1 and BNS2 was evaluated by thermo-gravimetric analysis. The effect of the as-synthesized additives on the biodegradability, anti-oxidation property, and lubricity in rapeseed oil was evaluated by respective standard method. Moreover, the morphology and tribochemical characteristics of the worn surfaces were examined by scanning electron microscope assembled with energy dispersive spectrometer. The results indicated that BNS1 and BNS2 both possess good thermal stability; BNS1 slightly impairs the biodegradability of rapeseed oil, but BNS2 facilitates the biodegradability of rapeseed oil. BNS1 and BNS2 could improve the anti-wear and friction-reducing performance of the rapeseed oil, but BNS1 exhibited better anti-wear ability as compared to that of BNS2, BNS2 exhibited better anti-wear ability in reducing friction coefficients as compared to that of BNS1. The enhanced anti-wear and friction-reducing abilities of rapeseed oil were ascribed to the formation of a composite boundary lubrication film due to the strong adsorption of BNS1 or BNS2 and rapeseed oil onto the lubricated surfaces and their tribochemical reactions with metal surfaces. BNS1 and BNS2 could both facilitate the anti-oxidation properties of the rapeseed oil.

TOWARD REPLACEMENT OF PETROLEUM OILS BY MODIFIED SOYBEAN OILS IN ELASTOMERS

2016 ◽  
Vol 89 (4) ◽  
pp. 608-630 ◽  
Author(s):  
Jiaxi Li ◽  
Avraam I. Isayev ◽  
Xiaofeng Ren ◽  
Mark D. Soucek
Keyword(s):  
Soybean Oil ◽  
Abrasion Resistance ◽  
Crosslink Density ◽  
Dynamic Properties ◽  
Rolling Resistance ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Precipitated Silica ◽  
Modified Soybean Oil ◽  
Tan Δ

ABSTRACT Precipitated silica- and carbon black (CB)-filled styrene-butadiene rubber (SBR) compounds and vulcanizates containing naphthenic oil (NO), soybean oil (SO), and modified soybean oil (MSO) were studied. Gel fraction; crosslink density; bound rubber fraction; curing behavior; and thermal, mechanical, and dynamic properties were compared. Interaction between SO, MSO, and silane coupling agent was also studied. It was shown that the incorporation of SO and MSO had similar effects in both silica- and CB-filled SBR compounds and vulcanizates. SO and MSO were found to consume curatives leading to a lower crosslink density and improved thermal stability of compounds and vulcanizates. In comparison with NO, MSO was found to increase the elongation at break and tensile strength, and the values of tan δ at 10 °C and 60 °C predict an increase of the wet traction performance and the rolling resistance to decrease the modulus and abrasion resistance. After adjusting the recipe, the modulus and abrasion resistance of the silica- and CB-filled SBR/MSO vulcanizates were tremendously increased, and the silica-filled SBR/MSO vulcanizates exhibited a better wet traction performance, a lower rolling resistance, and a better abrasion resistance simultaneously than the silica-filled SBR/NO vulcanizate.

Enrichment of stearidonic acid in modified soybean oil by low temperature crystallisation

2012 ◽  
Vol 130 (1) ◽  
pp. 147-155 ◽  
Author(s):  
Luis Vázquez ◽  
Casimir C. Akoh
Keyword(s):  
Low Temperature ◽  
Soybean Oil ◽  
Stearidonic Acid ◽  
Modified Soybean Oil

Reactive blends derived from modified soybean oil and silicone

2016 ◽  
Vol 54 (19) ◽  
pp. 3086-3093 ◽  
Author(s):  
Chetan Tambe ◽  
John Kaufmann ◽  
Daniel Graiver ◽  
Ramani Narayan
Keyword(s):  
Soybean Oil ◽  
Modified Soybean Oil
Sign in / Sign up

Export Citation Format

Share Document