scholarly journals Tectonic overpressure in weak crustal-scale shear zones and implications for the exhumation of high-pressure rocks

2013 ◽  
Vol 40 (10) ◽  
pp. 1984-1988 ◽  
Author(s):  
Stefan M. Schmalholz ◽  
Yuri Y. Podladchikov
Keyword(s):  
High Pressure ◽  
Shear Zones ◽  
Scale Shear

Chapter 14 Regional context and lithotectonic framework of the 1.1–0.9 Ga Sveconorwegian orogen, southwestern Sweden

2020 ◽  
Vol 50 (1) ◽  
pp. 337-349 ◽  
Author(s):  
Michael B. Stephens ◽  
Ulf Bergström ◽  
Carl-Henric Wahlgren
Keyword(s):  
High Pressure ◽  
Tectonic Evolution ◽  
Shear Zones ◽  
Crustal Extension ◽  
Frontal Part ◽  
Eastern Segment ◽  
Mountain Belts ◽  
Sveconorwegian Orogen ◽  
Scale Shear ◽  
Early Neoproterozoic

AbstractThe 1.1–0.9 Ga Sveconorwegian orogen in southwestern Scandinavia belongs to the global system of mountain belts established during the assembly of the supercontinent Rodinia. An overall north–south structural trend and five lithotectonic units bounded by crustal-scale shear zones characterize this orogen. In Sweden, the Eastern Segment abuts the orogen's cratonic foreland eastwards and is separated from the Idefjorden terrane westwards by a ductile shear zone, up to 5 km thick, displaying a sinistral transpressive component. These two lithotectonic units differ on the basis of their pre-Sveconorwegian accretionary tectonic evolution, and the timing of Sveconorwegian high-pressure metamorphism, anatexis and polyphase deformation. High-pressure granulites and migmatites formed at c. 1.05–1.02 Ga in the Idefjorden terrane; eclogites, high-pressure granulites and migmatites at c. 0.99–0.95 Ga in the Eastern Segment. Magmatic activity and crustal extension progressed westwards at c. 0.98–0.92 Ga. Prior to or at 0.93–0.91 Ga, greenschist facies shear deformation with top-to-the-foreland movement affected the frontal part of the orogen. Geodynamic uncertainties concern the affinity of the Idefjorden terrane relative to Fennoscandia (Baltica), the character of the Sveconorwegian orogenesis, and the contiguous or non-contiguous nature of the erosional fronts of the late Mesoproterozoic–early Neoproterozoic orogens in Sweden and Canada.

scholarly journals Timing of Paleozoic Exhumation and Deformation of the High-Pressure Vestgӧtabreen Complex at the Motalafjella Nunatak, Svalbard

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 125 ◽  
Author(s):  
Christopher J. Barnes ◽  
Katarzyna Walczak ◽  
Emilie Janots ◽  
David Schneider ◽  
Jarosław Majka
Keyword(s):  
High Pressure ◽  
Tectonic Evolution ◽  
Shear Zones ◽  
White Mica ◽  
Strike Slip ◽  
Structural Studies ◽  
Metamorphic Overprint ◽  
Subaerial Exposure ◽  
Facies Metamorphism

The Vestgӧtabreen Complex exposed in the Southwestern Caledonian Basement Province of Svalbard comprises two Caledonian high-pressure units. In situ white mica 40Ar/39Ar and monazite Th-U-total Pb geochronology has resolved the timing of the tectonic evolution of the complex. Cooling of the Upper Unit during exhumation occurred at 476 ± 2 Ma, shortly after eclogite-facies metamorphism. The two units were juxtaposed at 454 ± 6 Ma. This was followed by subaerial exposure and deposition of Bullbreen Group sediments. A 430–400 Ma late Caledonian phase of thrusting associated with major sinistral shearing throughout Svalbard deformed both the complex and the overlying sediments. This phase of thrusting is prominently recorded in the Lower Unit, and is associated with a pervasive greenschist-facies metamorphic overprint of high-pressure lithologies. A c. 365–344 Ma geochronological record may represent an Ellesmerian tectonothermal overprint. Altogether, the geochronological evolution of the Vestgӧtabreen Complex, with previous petrological and structural studies, suggests that it may be a correlative to the high-pressure Tsäkkok Lens in the Scandinavian Caledonides. It is suggested that the Vestgӧtabreen Complex escaped to the periphery of the orogen along the sinistral strike-slip shear zones prior to, or during the initial stages of continental collision between Baltica and Laurentia.

Pre-Caledonian granulite and gabbro enclaves in the Western Gneiss Region, Norway: indications of incomplete transition at high pressure

2000 ◽  
Vol 137 (3) ◽  
pp. 235-255 ◽  
Author(s):  
M. KRABBENDAM ◽  
A. WAIN ◽  
T. B. ANDERSEN
Keyword(s):  
High Pressure ◽  
Shear Zones ◽  
Granulite Facies ◽  
Amphibolite Facies ◽  
Ultrahigh Pressure ◽  
Western Gneiss Region ◽  
Ultrahigh Pressure Metamorphism ◽  
Mountain Belts ◽  
Orogenic Cycle ◽  
Highly Strained

The Western Gneiss Region of Norway is a continental terrane that experienced Caledonian high-pressure and ultrahigh-pressure metamorphism. Most rocks in this terrane show either peak-Caledonian eclogite-facies assemblages or are highly strained and equilibrated under late-Caledonian amphibolite-facies conditions. However, three kilometre-size rock bodies (Flatraket, Ulvesund and Kråkenes) in Outer Nordfjord preserve Pre-Caledonian igneous and granulite-facies assemblages and structures. Where these assemblages are preserved, the rocks are consistently unaffected by Caledonian deformation. The three bodies experienced high-pressure conditions (20–23 kbar) but show only very localized (about 5%) eclogitization in felsic and mafic rocks, commonly related to shear zones. The preservation of Pre-Caledonian felsic and mafic igneous and granulite-facies assemblages in these bodies, therefore, indicates widespread (∼ 95%) metastability at pressures higher than other metastable domains in Norway. Late-Caledonian amphibolite-facies retrogression was limited. The degree of reaction is related to the protolith composition and the interaction of fluid and deformation during the orogenic cycle, whereby metastability is associated with a lack of deformation and lack of fluids, either as a catalyst or as a component in hydration reactions. The three bodies appear to have been far less reactive than the external gneisses in this region, even though they followed a similar pressure–temperature evolution. The extent of metastable behaviour has implications for the protolith of the Western Gneiss Region, for the density evolution of high-pressure terranes and hence for the geodynamic evolution of mountain belts.

A new model for brittle failure at depth involving high-pressure metamorphism

2020 ◽  
Author(s):  
Philippe Yamato ◽  
Marie Baïsset
Keyword(s):  
High Pressure ◽  
Host Rock ◽  
Continuous Process ◽  
Shear Zones ◽  
Brittle Deformation ◽  
Local Pressure ◽  
Intermediate Depth ◽  
Crustal Rocks ◽  
High Pressure Metamorphism ◽  
Convergence Zones

<p>Intermediate-depth earthquakes are registered in convergence zones where crustal rocks are expected to deform by ductile flow. This paradox is also evidenced in exhumed crustal rocks where brittle structures (e.g., pseudotachylytes and breccias) associated to high-pressure metamorphism have been documented. If the link between brittle deformation and metamorphic reactions appears obvious today, the mechanism involved is still a burning issue. We propose that the initial heterogeneity of rocks, by itself, is sufficient to trigger both metamorphic reaction and brittle deformation. Based on a mechanically consistent dynamic model, we show that local pressure variations due to pre-existing heterogeneities can be high enough to reach the thermodynamic conditions required for reaction initiation. Brittle behaviour is then controlled by the strength difference between the untransformed host rock and its reaction product. This continuous process also explains the higher pressures recorded in eclogite facies rocks of ductile shear zones compared to their brittle host rock. Our results, constraint by natural data, have therefore significant implications for intermediate-depth seismicity.</p>

Cyclic brittle-ductile behaviour recorded in exhuming high-pressure continental units of the Northern Apennines.

2020 ◽  
Author(s):  
Francesco Giuntoli ◽  
Giulio Viola
Keyword(s):  
High Pressure ◽  
High Strain ◽  
Shear Zones ◽  
White Mica ◽  
Northern Apennines ◽  
Strain Partitioning ◽  
Coseismic Slip ◽  
Quartz Veins ◽  
Mylonitic Foliation ◽  
History Of

<p>Exhumation of subducted high-pressure units is favoured by relatively narrow, high-strain shear zones, where most metamorphic and deformational processes occur. Unfortunately, these are commonly overprinted and/or partly or fully obliterated along the exhumation path by younger fabrics or by metamorphic re-equilibration. Their identification and characterization are, therefore, of primary importance when aiming at reconstructing the deepest (and thus earliest) tectonometamorphic history of high-pressure crustal units.</p><p>The Northern Apennines (Italy) offer the opportunity to study a unique setting where continental units (Tuscan Metamorphic Units) were subducted to high-pressure conditions and then exhumed and juxtaposed against non-metamorphic units (Tuscan Nappe). We have studied a well exposed section in the Monticiano-Roccastrada Unit of the Mid Tuscan Ridge (MTR), where a mesoscopic (~20 m length and 5 m high) compressional duplex deforms the Palaeozoic-Triassic quartz-rich metasandstones, metaconglomerates and minor metapelites of the Monte Quoio - Montagnola Senese Unit with a top-to-the-NE sense of shear (Arenarie di Poggio al Carpino Formation; Casini et al., 2007).</p><p>Our approach is based on detailed fieldwork, microstructural and petrological investigations. Field observations reveal severe strain partitioning within the duplex between metapelite levels, corresponding to 10-50 cm thick high-strain zones, and metasandstone levels, which form relatively strain-free metric horses. Early generations of quartz veins are highly transposed (sheath folds occur) parallel to the metapelitic high-strain shear zones. Veins are composed of iso-oriented quartz, forming up to several centimetre long single-grain ribbons, Mg-carpholite (XMg~ 0.65) needles and K-white mica marking the stretching lineation. Carpholite in the transposed veins invariably defines the stretching direction of shear zones. These high-P veins coexist with a later generation of less deformed, oblique quartz veins. The mylonitic foliation in the metapelites is defined by quartz, chloritoid, pyrophyllite and K-white mica forming a stretching lineation coherent with the one visible in the veins. Geometrical, cross-cutting and petrographic relations suggest that there has occurred cyclic deformation between brittle and viscous conditions, with the veins forming broadly syn-mylonitic shearing. Thermodynamic modeling results suggest >0.8 GPa and ~350°C for the formation of both the high-pressure veins and the mylonitic foliation.</p><p>Shear zones were subsequently folded about the NNW-SSE axis of the regional antiform associated with the MTR. Later brittle overprinting is represented by quart-filled tension gashes and localized C’ planes, mostly within the more competent metasandstone levels, indicating top-to-the-SW reactivation. In summary, our results suggest a cyclic brittle-ductile behaviour occurring at high pressure conditions. This could potentially reflect the repeated alternation between aseismic creep (viscous) and coseismic slip (brittle) during the first stages of the exhumation history of this portion of the northern Apennines, from lower to middle crustal levels in a compressional top-to-the-NE setting. Dating of K-white mica is ongoing to constrain the geodynamic scenario of such shear zone.</p><p> </p><p>Casini, G., Decandia, F.A., Tavarnelli, E., 2007. Analysis of a mesoscopic duplex in SW Tuscany, Italy: implications for thrust system development during positive tectonic inversion. Geol. Soc. London, Spec. Publ. 272, 437–446.</p><p> </p>

scholarly journals Deeply subducted continental fragments – Part 1: Fracturing, dissolution–precipitation, and diffusion processes recorded by garnet textures of the central Sesia Zone (western Italian Alps)

Solid Earth ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 167-189 ◽  
Author(s):  
Francesco Giuntoli ◽  
Pierre Lanari ◽  
Martin Engi
Keyword(s):  
High Pressure ◽  
Diffusion Processes ◽  
Shear Zones ◽  
Granulite Facies ◽  
Thermodynamic Modelling ◽  
Italian Alps ◽  
Eclogite Facies ◽  
Compositional Patterns ◽  
And Diffusion ◽  
Insight Into

Abstract. Contiguous continental high-pressure terranes in orogens offer insight into deep recycling and transformation processes that occur in subduction zones. These remain poorly understood, and currently debated ideas need testing. The approach we chose is to investigate, in detail, the record in suitable rock samples that preserve textures and robust mineral assemblages that withstood overprinting during exhumation. We document complex garnet zoning in eclogitic mica schists from the Sesia Zone (western Italian Alps). These retain evidence of two orogenic cycles and provide detailed insight into resorption, growth, and diffusion processes induced by fluid pulses in high-pressure conditions. We analysed local textures and garnet compositional patterns, which turned out remarkably complex. By combining these with thermodynamic modelling, we could unravel and quantify repeated fluid–rock interaction processes. Garnet shows low-Ca porphyroclastic cores that were stable under (Permian) granulite facies conditions. The series of rims that surround these cores provide insight into the subsequent evolution: the first garnet rim that surrounds the pre-Alpine granulite facies core in one sample indicates that pre-Alpine amphibolite facies metamorphism followed the granulite facies event. In all samples documented, cores show lobate edges and preserve inner fractures, which are sealed by high-Ca garnet that reflects high-pressure Alpine conditions. These observations suggest that during early stages of subduction, before hydration of the granulites, brittle failure of garnet occurred, indicating high strain rates that may be due to seismic failure. Several Alpine rims show conspicuous textures indicative of interaction with hydrous fluid: (a) resorption-dominated textures produced lobate edges, at the expense of the outer part of the granulite core; (b) peninsulas and atoll garnet are the result of replacement reactions; and (c) spatially limited resorption and enhanced transport of elements due to the fluid phase are evident along brittle fractures and in their immediate proximity. Thermodynamic modelling shows that all of these Alpine rims formed under eclogite facies conditions. Structurally controlled samples allow these fluid–garnet interaction phenomena to be traced across a portion of the Sesia Zone, with a general decrease in fluid–garnet interaction observed towards the external, structurally lower parts of the terrane. Replacement of the Permian HT assemblages by hydrate-rich Alpine assemblages can reach nearly 100 % of the rock volume. Since we found no clear relationship between discrete deformation structures (e.g. shear zones) observed in the field and the fluid pulses that triggered the transformation to eclogite facies assemblages, we conclude that disperse fluid flow was responsible for the hydration.

The role of regional-scale shear zones in paleogeographic reconstructions: the case study of the Variscan belt in the Mediterranean area

2021 ◽  
Author(s):  
Matteo Simonetti ◽  
Rodolfo Carosi ◽  
Chiara Montomoli ◽  
Salvatore Iaccarino
Keyword(s):  
Earth Sciences ◽  
Shear Zone ◽  
Regional Scale ◽  
Shear Zones ◽  
Mediterranean Area ◽  
Variscan Belt ◽  
Metamorphic Evolution ◽  
The Mediterranean ◽  
Scale Shear

<p>Paleogeographic reconstruction and recognition of the tectono-metamorphic evolution of ancient orogenic belt is often complex. The combination of an adequate amount of paleomagnetic, metamorphic, structural and geochronological data is necessary. Fundamental data derive from the study of regional-scale shear zones, that can be directly observed, by combining detailed field work with structural analysis, microstructural analysis and petrochronology. The Southern European Variscan Belt in the Mediterranean area was partially overprinted by the Alpine cycle (Stampfli and Kozur, 2006) and correlations are mainly based on lithological similarities. Little attention has been paid to the compatibility of structures in the dispersed fragments. A main debate is the connection among the Corsica-Sardinia Block (CSB), the Maures-Tanneron Massif (MTM) and the future Alpine External Crystalline Massifs (ECM) (Stampfli et al., 2002; Advokaat et al., 2014) and if these sectors were connected by a network of shear zones of regional extent, known as the East Variscan Shear Zone (EVSZ).</p><p>We present a multidisciplinary study of shear zones cropping out in the CSB (the Posada-Asinara shear zone; Carosi et al., 2020), in the MTM (the Cavalaire Fault; Simonetti et al., 2020a) and in the ECM (the Ferriere-Mollières and the Emosson-Berard shear zones; Simonetti et al., 2018; 2020b).</p><p>Kinematic and finite strain analysis allowed to recognize a transpressional deformation, with a major component of pure shear and a variable component of simple shear, coupled with general flattening deformation. Syn-kinematic paragenesis, microstructures and quartz c-axis fabrics revealed that shear deformation, in all the studied sectors, occurred under decreasing temperature starting from amphibolite-facies up to greenschist-facies. A systematic petrochronological study (U-Th-Pb on monazite collected in the sheared rocks) was conducted in order to constrain the timing of deformation. We obtained ages ranging between ~340 Ma and ~320 Ma. Ages of ~340-330 Ma can be interpreted as the beginning of the activity of the EVSZ along its older branches while ages of ~320 Ma, obtained in all the shear zones, demonstrate that they were all active in the same time span.</p><p>The multidisciplinary approach revealed a similar kinematics and tectono-metamorphic evolution of the studied shear zones contributing to better constrain the extension and timing the EVSZ and to strength the paleogeographic reconstructions of the Southern Variscan belt during Late Carboniferous time, with important implications on the evolution of the Mediterranean area after the Late Paleozoic. This case study demonstrates how paleogeographic reconstructions could benefit from datasets obtained from large-scale structures (i.e., shear zones) that can be directly investigated.</p><p> </p><p>Advokaat et al. (2014). Earth and Planetary Science Letters 401, 183–195</p><p> </p><p>Carosi et al. (2012). Terra Nova 24, 42–51</p><p> </p><p>Carosi and Palmeri (2002). Geological Magazine 139.</p><p> </p><p>Carosi et al. (2020). Geosciences 10, 288.</p><p> </p><p>Simonetti et al (2020a). International Journal of Earth Sciences 109, 2261–2285</p><p> </p><p>Simonetti et al. (2020b). Tectonics 39</p><p> </p><p>Simonetti et al. (2018). International Journal of Earth Sciences. 107, 2163–2189</p><p> </p><p>Stampfli and Kozur (2006). Geological Society, London, Memoirs 32, 57–82</p><p> </p><p>Stampfli et al. (2002). Journal of the Virtual Explorer 8, 77</p>

Sign in / Sign up

Export Citation Format

Share Document