Pre-Caledonian granulite and gabbro enclaves in the Western Gneiss Region, Norway: indications of incomplete transition at high pressure

2000 ◽  
Vol 137 (3) ◽  
pp. 235-255 ◽  
Author(s):  
M. KRABBENDAM ◽  
A. WAIN ◽  
T. B. ANDERSEN
Keyword(s):  
High Pressure ◽  
Shear Zones ◽  
Granulite Facies ◽  
Amphibolite Facies ◽  
Ultrahigh Pressure ◽  
Western Gneiss Region ◽  
Ultrahigh Pressure Metamorphism ◽  
Mountain Belts ◽  
Orogenic Cycle ◽  
Highly Strained

The Western Gneiss Region of Norway is a continental terrane that experienced Caledonian high-pressure and ultrahigh-pressure metamorphism. Most rocks in this terrane show either peak-Caledonian eclogite-facies assemblages or are highly strained and equilibrated under late-Caledonian amphibolite-facies conditions. However, three kilometre-size rock bodies (Flatraket, Ulvesund and Kråkenes) in Outer Nordfjord preserve Pre-Caledonian igneous and granulite-facies assemblages and structures. Where these assemblages are preserved, the rocks are consistently unaffected by Caledonian deformation. The three bodies experienced high-pressure conditions (20–23 kbar) but show only very localized (about 5%) eclogitization in felsic and mafic rocks, commonly related to shear zones. The preservation of Pre-Caledonian felsic and mafic igneous and granulite-facies assemblages in these bodies, therefore, indicates widespread (∼ 95%) metastability at pressures higher than other metastable domains in Norway. Late-Caledonian amphibolite-facies retrogression was limited. The degree of reaction is related to the protolith composition and the interaction of fluid and deformation during the orogenic cycle, whereby metastability is associated with a lack of deformation and lack of fluids, either as a catalyst or as a component in hydration reactions. The three bodies appear to have been far less reactive than the external gneisses in this region, even though they followed a similar pressure–temperature evolution. The extent of metastable behaviour has implications for the protolith of the Western Gneiss Region, for the density evolution of high-pressure terranes and hence for the geodynamic evolution of mountain belts.

Fluids in coesite-bearing rocks of the Tso Morari Complex, NW Himalaya: evidence for entrapment during peak metamorphism and subsequent uplift

2009 ◽  
Vol 146 (6) ◽  
pp. 876-889 ◽  
Author(s):  
BARUN K. MUKHERJEE ◽  
HIMANSHU K. SACHAN
Keyword(s):  
High Salinity ◽  
Granulite Facies ◽  
Ultrahigh Pressure ◽  
Nw Himalaya ◽  
Rock Interaction ◽  
Low Salinity ◽  
Ultrahigh Pressure Metamorphism ◽  
Indian Lithosphere ◽  
External Sources ◽  
Tso Morari

AbstractFluid inclusions trapped in coesite-bearing rocks provide important information on the fluid phases present during ultrahigh-pressure metamorphism. The subduction-related coesite-bearing eclogites of the Tso Morari Complex, Himalaya, contain five major types of fluids identified by microthermometry and Raman spectroscopy. These are: (1) high-salinity brine, (2) N2, (3) CH4, (4) CO2and (5) low-salinity aqueous fluids. These fluids were trapped during both deep subduction and exhumation processes. The coesite-bearing rocks are inferred to have been buried to a depth of >120 km, where they experienced ultrahigh-pressure metamorphism. The fluid–rock interaction provides direct evidence for fluid derivation during a deep subduction process as demonstrated by silica–carbonate assemblages in eclogite. High salinity brine, N2and CH4inclusions are remnants of prograde and peak metamorphic fluids, whereas CO2and low-salinity aqueous fluids appear to have been trapped late, during uplift. The high-salinity brine was possibly derived from subducted ancient metasedimentary rocks, whereas the N2and CH4fluids were likely generated through chemical breakdown of NH3-bearing K minerals and graphite. Alternatively, CH4might have been formed by a mixed fluid that was released from calcareous sediments during subduction or supplied through subducted oceanic metabasic rocks. High density CO2is associated with matrix minerals formed during granulite-facies overprinting of the ultrahigh-pressure eclogite. During retrogression to amphibolite-facies conditions, low-salinity fluids were introduced from external sources, probably the enclosing gneisses. This source enhances salinity differences as compared to primary saline inclusions. The subducting Indian lithosphere produced brines prior to achieving maximal depths of >120 km, where fluids were instead dominated by gaseous phases. Subsequently, the Indian lithosphere released CO2-rich fluids during fast exhumation and was then infiltrated by the low-salinity aqueous fluids near the surface through external sources. Elemental modelling may improve quantitative understanding of the complexity of fluids and their reactions.

Proterozoic geological evolution of the northern Vestfold Hills, Antarctica

1991 ◽  
Vol 128 (4) ◽  
pp. 307-318 ◽  
Author(s):  
C. W. Passchier ◽  
R. F. Bekendam ◽  
J. D. Hoek ◽  
P. G. H. M. Dirks ◽  
H. de Boorder
Keyword(s):  
Large Scale ◽  
Structural Evolution ◽  
Shear Zones ◽  
Granulite Facies ◽  
Strike Slip ◽  
Amphibolite Facies ◽  
Tectonic Event ◽  
Vestfold Hills ◽  
Two Phases ◽  
Brittle Faulting

AbstractThe presence of polyphase shear zones transected by several suites of dolerite dykes in Archaean basement of the Vestfold Hills, East Antarctica, allows a detailed reconstruction of the local structural evolution. Archaean and early Proterozoic deformation at granulite facies conditions was followed by two phases of dolerite intrusion and mylonite generation in strike-slip zones at amphibolite facies conditions. A subsequent middle Proterozoic phase of brittle normal faulting led to the development of pseudotachylite, predating intrusion of the major swarm of dolerite dykes around 1250 Ma. During the later stages and following this event, pseudotachylite veins were reactivated as ductile, mylonitic thrusts under prograde conditions, culminating in amphibolite facies metamorphism around 1000–1100 Ma. This is possibly part of a large-scale tectonic event during which the Vestfold block was overthrust from the south. In a final phase of strike-slip deformation, several pulses of pseudotachylite-generating brittle faulting alternated with ductile reactivation of pseudotachylite.

scholarly journals Deeply subducted continental fragments – Part 1: Fracturing, dissolution–precipitation, and diffusion processes recorded by garnet textures of the central Sesia Zone (western Italian Alps)

Solid Earth ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 167-189 ◽  
Author(s):  
Francesco Giuntoli ◽  
Pierre Lanari ◽  
Martin Engi
Keyword(s):  
High Pressure ◽  
Diffusion Processes ◽  
Shear Zones ◽  
Granulite Facies ◽  
Thermodynamic Modelling ◽  
Italian Alps ◽  
Eclogite Facies ◽  
Compositional Patterns ◽  
And Diffusion ◽  
Insight Into

Abstract. Contiguous continental high-pressure terranes in orogens offer insight into deep recycling and transformation processes that occur in subduction zones. These remain poorly understood, and currently debated ideas need testing. The approach we chose is to investigate, in detail, the record in suitable rock samples that preserve textures and robust mineral assemblages that withstood overprinting during exhumation. We document complex garnet zoning in eclogitic mica schists from the Sesia Zone (western Italian Alps). These retain evidence of two orogenic cycles and provide detailed insight into resorption, growth, and diffusion processes induced by fluid pulses in high-pressure conditions. We analysed local textures and garnet compositional patterns, which turned out remarkably complex. By combining these with thermodynamic modelling, we could unravel and quantify repeated fluid–rock interaction processes. Garnet shows low-Ca porphyroclastic cores that were stable under (Permian) granulite facies conditions. The series of rims that surround these cores provide insight into the subsequent evolution: the first garnet rim that surrounds the pre-Alpine granulite facies core in one sample indicates that pre-Alpine amphibolite facies metamorphism followed the granulite facies event. In all samples documented, cores show lobate edges and preserve inner fractures, which are sealed by high-Ca garnet that reflects high-pressure Alpine conditions. These observations suggest that during early stages of subduction, before hydration of the granulites, brittle failure of garnet occurred, indicating high strain rates that may be due to seismic failure. Several Alpine rims show conspicuous textures indicative of interaction with hydrous fluid: (a) resorption-dominated textures produced lobate edges, at the expense of the outer part of the granulite core; (b) peninsulas and atoll garnet are the result of replacement reactions; and (c) spatially limited resorption and enhanced transport of elements due to the fluid phase are evident along brittle fractures and in their immediate proximity. Thermodynamic modelling shows that all of these Alpine rims formed under eclogite facies conditions. Structurally controlled samples allow these fluid–garnet interaction phenomena to be traced across a portion of the Sesia Zone, with a general decrease in fluid–garnet interaction observed towards the external, structurally lower parts of the terrane. Replacement of the Permian HT assemblages by hydrate-rich Alpine assemblages can reach nearly 100 % of the rock volume. Since we found no clear relationship between discrete deformation structures (e.g. shear zones) observed in the field and the fluid pulses that triggered the transformation to eclogite facies assemblages, we conclude that disperse fluid flow was responsible for the hydration.

Geology and timing of dextral strike-slip shear zones in Danmarkshavn, North-East Greenland Caledonides

2006 ◽  
Vol 143 (4) ◽  
pp. 431-446 ◽  
Author(s):  
C. SARTINI-RIDEOUT ◽  
J. A. GILOTTI ◽  
W. C. McCLELLAND
Keyword(s):  
Deformation Zone ◽  
Shear Zones ◽  
Amphibolite Facies ◽  
Ultrahigh Pressure ◽  
High Mass ◽  
Weighted Mean ◽  
East Greenland ◽  
North East ◽  
The North ◽  
Land Deformation

The North-East Greenland eclogite province is divided into a western, central and eastern block by the sinistral Storstrømmen shear zone in the west and the dextral Germania Land deformation zone in the east. A family of steep, NNW-striking dextral mylonite zones in the Danmarkshavn area are geometrically and kinematically similar to the ductile Germania Land deformation zone, located 25 km to the east. Amphibolite facies deformation at Danmarkshavn is characterized by boudinage of eclogite bodies within quartzofeldspathic host gneisses, pegmatite emplacement into the boudin necks and subsequent deformation of pegmatites parallel to gneissosity, a widespread component of dextral shear within the gneisses, and localization of strain into 10–50 m thick dextral mylonite zones. The gneisses and concordant mylonite zones are cut by a swarm of weakly to undeformed, steeply dipping, E–W-striking pegmatitic dykes. Oscillatory-zoned zircon cores from two boudin neck pegmatites give weighted mean 206Pb/238U sensitive, high mass resolution ion microprobe (SHRIMP) ages of 376 ± 5 Ma and 343 ± 7 Ma. Cathodoluminescence images of these zircons reveal complex additional rims, with ages from ranging from c. 360 to 320 Ma. Oscillatory-zoned, prismatic zircons from two late, cross-cutting pegmatites yield weighted mean 206Pb/238U SHRIMP ages of 343 ± 5 Ma and 332 ± 3 Ma. Zircons from the boudin neck pegmatites record a prolonged growth history, marked by fluid influx, during amphibolite facies metamorphism beginning at c. 375 Ma. The cross-cutting pegmatites show that dextral deformation in the gneisses and ductile mylonite zones had stopped by c. 340 Ma. Ultrahigh-pressure metamorphism in the eastern block at 360 Ma requires that the Greenland Caledonides were in an overall contractional plate tectonic regime. This, combined with 20% steep amphibolite facies lineations in the eclogites, gneisses and mylonites suggests that dextral transpression may have been responsible for a first stage of eclogite exhumation between 370 and 340 Ma.

Chapter 14 Regional context and lithotectonic framework of the 1.1–0.9 Ga Sveconorwegian orogen, southwestern Sweden

2020 ◽  
Vol 50 (1) ◽  
pp. 337-349 ◽  
Author(s):  
Michael B. Stephens ◽  
Ulf Bergström ◽  
Carl-Henric Wahlgren
Keyword(s):  
High Pressure ◽  
Tectonic Evolution ◽  
Shear Zones ◽  
Crustal Extension ◽  
Frontal Part ◽  
Eastern Segment ◽  
Mountain Belts ◽  
Sveconorwegian Orogen ◽  
Scale Shear ◽  
Early Neoproterozoic

AbstractThe 1.1–0.9 Ga Sveconorwegian orogen in southwestern Scandinavia belongs to the global system of mountain belts established during the assembly of the supercontinent Rodinia. An overall north–south structural trend and five lithotectonic units bounded by crustal-scale shear zones characterize this orogen. In Sweden, the Eastern Segment abuts the orogen's cratonic foreland eastwards and is separated from the Idefjorden terrane westwards by a ductile shear zone, up to 5 km thick, displaying a sinistral transpressive component. These two lithotectonic units differ on the basis of their pre-Sveconorwegian accretionary tectonic evolution, and the timing of Sveconorwegian high-pressure metamorphism, anatexis and polyphase deformation. High-pressure granulites and migmatites formed at c. 1.05–1.02 Ga in the Idefjorden terrane; eclogites, high-pressure granulites and migmatites at c. 0.99–0.95 Ga in the Eastern Segment. Magmatic activity and crustal extension progressed westwards at c. 0.98–0.92 Ga. Prior to or at 0.93–0.91 Ga, greenschist facies shear deformation with top-to-the-foreland movement affected the frontal part of the orogen. Geodynamic uncertainties concern the affinity of the Idefjorden terrane relative to Fennoscandia (Baltica), the character of the Sveconorwegian orogenesis, and the contiguous or non-contiguous nature of the erosional fronts of the late Mesoproterozoic–early Neoproterozoic orogens in Sweden and Canada.

Multi-stage metamorphism of the South Altyn ultrahigh-pressure metamorphic belt, West China: insights into tectonic evolution from continental subduction to arc–backarc extension

2021 ◽  
Author(s):  
Jie Dong ◽  
Chunjing Wei
Keyword(s):  
Late Stage ◽  
Tectonic Evolution ◽  
Granulite Facies ◽  
Amphibolite Facies ◽  
Ultrahigh Pressure ◽  
Garnet Amphibolite ◽  
The South ◽  
Metamorphic Belt ◽  
Mineral Assemblages ◽  
Eclogite Facies

Abstract The South Altyn ultrahigh-pressure (UHP) metamorphic belt is claimed to host the deepest subducted continental crust based on the discovery of former stishovite, and thus can provide unique insights into the tectonic evolution from deep continental subduction and exhumation to arc–backarc extension. In this paper, we present detailed studies of petrography, mineral chemistry, phase equilibria modelling and zircon U-Pb dating for three representative samples involving garnet amphibolite (A1531 & A1533) and associated garnet-biotite gneiss (A1534) from the UHP belt. Three phases of metamorphism are inferred for the rocks. The first phase high pressure (HP)–UHP-type eclogite facies is represented by the mineral assemblages of garnet and phengite inclusions in zircon and garnet cores with the high grossular (XGrs = 0.33–0.34). The Si contents of 3.40–3.53 and 3.24–3.25 p.f.u. in phengite inclusions yield pressure conditions of >1.7–2.3 GPa for A1533 and 2.5–2.55 GPa for A1534 at a fixed temperature of 770 °C. The second phase medium-pressure (MP)-type overprinting of garnet amphibolite facies shows P–T conditions of 0.8–1.2 GPa/750–785 °C based on the stability fields of corresponding mineral assemblages, the measured isopleths of Ti contents in biotite and amphibole cores, and XGrs in garnet. The third phase low-pressure (LP) type overprinting includes early-stage heating to peak granulite facies followed by cooling towards a late-stage amphibolite facies. The peak granulite facies is represented by the high Ti amphibole mantle, high Zr titanite and the intergrowths of clinopyroxene + ilmenite in A1533 & A1531, with P–T conditions of 800–875 °C/0.80–0.95 GPa. The late-stage is defined by the solidus assemblages, giving P–T conditions of 0.5–0.7 GPa/720–805 °C. U-Pb geochronology on metamorphic zircons from A1533 and A1534 gives three ages of c. 500 Ma, c. 482 Ma and c. 460 Ma. They are interpreted to represent the HP–UHP, MP and LP types of metamorphism respectively, based on cathodoluminescence images, mineral inclusions and trace element patterns. Combining the regional geology and metamorphic evolution from the Altyn Orogen, a tectonic model is inferred, including the following tectonic scenarios. The small Altyn Microcontinent was subducted to great mantle depths with dragging of the surrounding vast oceanic lithosphere to undergo the HP–UHP eclogite facies metamorphism during the early subduction stage (c. 500 Ma) of the Proto-Tethys Ocean. Then, the subducted slabs were exhumed to a thickened crust region to be overprinted by the MP-type assemblages at c. 482 Ma. Finally, an arc–backarc extension was operated within the thickened crust region due to the retreat of subduction zones. It caused evident heating and the LP-type metamorphic overprinting at c. 460 Ma, with a fairly long interval of 30–40 Myr after the HP–UHP metamorphism, distinct from the short interval of <5–10 Myr in the Bohemian Massif.

U–Pb zircon geochronology of eclogites from the Scandian Orogen, northern Western Gneiss Region, Norway: 14–20 million years between eclogite crystallization and return to amphibolite-facies conditionsThis article is one of a series of papers published in this Special Issue on the theme of Geochronology in honour of Tom Krogh.

2011 ◽  
Vol 48 (2) ◽  
pp. 441-472 ◽  
Author(s):  
Thomas E. Krogh ◽  
Sandra L. Kamo ◽  
Peter Robinson ◽  
Michael P. Terry ◽  
Kim Kwok
Keyword(s):  
High Pressure ◽  
Continental Collision ◽  
Amphibolite Facies ◽  
Granitic Pegmatite ◽  
Zircon Geochronology ◽  
Plate Tectonic ◽  
Special Issue ◽  
Western Gneiss Region ◽  
Garnet Pyroxenite ◽  
Ultra High Pressure

Reconstructing tectonic histories involving continental collision, subduction, and exhumation at plate-tectonic rates of ∼1 cm/year, requires precise U–Pb zircon geochronology. The Western Gneiss Region has exceptional exposures of high-pressure (HP) and ultra-high-pressure (UHP) rocks. The strategy adopted here involved sampling eclogite and associated late unstrained pegmatites to acquire the time of eclogite crystallization and subsequent exhumation, respectively. The oldest eclogite sampled is 415 ± 1 Ma from layered, probably UHP eclogite at Tevik, Averøya, also with a garnet–hornblende assemblage at 410 ± 1 Ma. The Flem Gabbro eclogite margin, with implied UHP conditions, is 410 ± 2 Ma. Hornblende eclogite at Seth, Lepsøya, never at UHP, is 412 ± 2 Ma. These compare to Devonian ages of 401 ± 1 Ma for overgrowths on Proterozoic baddeleyite in Selnes Gabbro, 402 ± 2 Ma for coesite eclogite at Hareidlandet, 405–400 Ma for coesite eclogite at Flatraket, and 405 ± 2 Ma for near-UHP eclogite at Hjelmelandsdalen. The 415 Ma eclogite at Tevik compares to granitic pegmatite in the same outcrop at 395.2 ± 1.3 Ma and to pegmatite in eclogite at Aspøya at 395.3 ± 2 Ma. The 410 Ma age at Flem compares to nearby pegmatite in eclogite at 396 ± 4 Ma. Collectively, these results imply 14–20 million years between deep eclogite crystallization at ∼130 km and return to amphibolite-facies conditions at ∼30 km, with crystallization of locally derived granitoid melts. Nearby garnet-pyroxenite records older ages (∼430) and greater depths (∼200 km), but on similar exhumation paths at ∼0.4–0.7 cm/year.

Metagabbronorite from DSDP hole 334: an example of high-temperature deformation and recrystallization near the Mid-Atlantic Ridge

1977 ◽  
Vol 14 (4) ◽  
pp. 886-898 ◽  
Author(s):  
Herwart Helmstaedt ◽  
John M. Allen
Keyword(s):  
Shear Zone ◽  
Regional Metamorphism ◽  
Shear Zones ◽  
Granulite Facies ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Mid Atlantic Ridge ◽  
Magmatic History ◽  
Highly Strained ◽  
Zoned Plagioclase

Five gabbros and three peridotites from hole 334 were examined for postmagmatic deformational changes and metamorphic recrystallization. The condition of the gabbros ranges from unaltered, to slightly altered and deformed, to highly deformed and metamorphosed, the latter type being confined to narrow shear zones. Petrofabric studies and electron microprobe analyses of mineral phases of a foliated metagabbronorite from such a shear zone suggest the following post-magmatic history: (1) strong plastic deformation and anhydrous synkinematic recrystallization of igneous plagioclase (An90−85), clinopyroxene, and orthopyroxene to the granulite facies mineral assemblage of strongly zoned plagioclase (An80−65), diopside, and orthopyroxene; relics of the igneous minerals survived as highly strained porphyroclasts; (2) synkinematic growth of amphibole consisting of a patchy intergrowth of tremolite and actinolitic hornblende; the amphibole fabric is compatible with strain estimates by the centre-point method; (3) mainly static hydrous alteration — growth of (?) vermiculite and sericitization.Penetrative deformation probably initiated shortly after intrusion and took place during cooling of the rocks from approximately 800 °C to 300 °C. The bulk of the strain in the metagabbronorite of the shear zone predates the serpentinization of the peridotites. Many textural and fabric features in alpine-type gabbro–peridotite complexes that are ascribed to regional metamorphism and deformation during orogenic emplacement may originate shortly after intrusion near or at an accreting plate margin.

Sign in / Sign up

Export Citation Format

Share Document