Effect of machining and drag finishing on the surface integrity and mechanical properties of Inconel 718 alloys fabricated by laser powder bed fusion additive manufacturing

2022 ◽  
Vol 53 (1) ◽  
pp. 109-118
Author(s):  
Y. Karabulut ◽  
Y. Kaynak ◽  
S. Sharif ◽  
M.A. Suhaimi
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Surface Integrity ◽  
Inconel 718 ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Drag Finishing

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bing Zhang ◽  
Raiyan Seede ◽  
Austin Whitt ◽  
David Shoukr ◽  
Xueqin Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Uncertainty Quantification ◽  
Process Optimization ◽  
Powder Bed Fusion ◽  
Assessment Framework ◽  
Laser Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Analytical Thermal Model

Purpose There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM. Design/methodology/approach The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework. Findings Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature. Originality/value Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.

Additive manufacturing of a Ni-20.wt.%Cr binary alloy by laser powder bed fusion: Impact of the microstructure on the mechanical properties

2022 ◽  
pp. 142625
Author(s):  
Eric Hug ◽  
Maxime Lelièvre ◽  
Cendrine Folton ◽  
Alexis Ribet ◽  
Mayerling Martinez-Celis ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Binary Alloy ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed

On the manufacturability of Inconel 718 thin-walled honeycomb structures by laser powder bed fusion

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
José M. Zea Pérez ◽  
Jorge Corona-Castuera ◽  
Carlos Poblano-Salas ◽  
John Henao ◽  
Arturo Hernández Hernández
Keyword(s):  
Mechanical Properties ◽  
Inconel 718 ◽  
Dimensional Accuracy ◽  
Honeycomb Lattice ◽  
Lattice Structures ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Thin Walled

Purpose The purpose of this paper is to study the effects of printing strategies and processing parameters on wall thickness, microhardness and compression strength of Inconel 718 superalloy thin-walled honeycomb lattice structures manufactured by laser powder bed fusion (L-PBF). Design/methodology/approach Two printing contour strategies were applied for producing thin-walled honeycomb lattice structures in which the laser power, contour path, scanning speed and beam offset were systematically modified. The specimens were analyzed by optical microscopy for dimensional accuracy. Vickers hardness and quasi-static uniaxial compression tests were performed on the specimens with the least difference between the design wall thickness and the as built one to evaluate their mechanical properties and compare them with the counterparts obtained by using standard print strategies. Findings The contour printing strategies and process parameters have a significant influence on reducing the fabrication time of thin-walled honeycomb lattice structures (up to 50%) and can lead to improve the manufacturability and dimensional accuracy. Also, an increase in the young modulus up to 0.8 times and improvement in the energy absorption up to 48% with respect to those produced by following a standard strategy was observed. Originality/value This study showed that printing contour strategies can be used for faster fabrication of thin-walled lattice honeycomb structures with similar mechanical properties than those obtained by using a default printing strategy.

Laser Welding of Laser Powder Bed Fusion Manufactured Inconel 718: Microstructure and Mechanical Properties

2021 ◽  
Vol 883 ◽  
pp. 234-241
Author(s):  
Timo Rautio ◽  
Jarmo Mäkikangas ◽  
Jani Kumpula ◽  
Antti Järvenpää ◽  
Atef Hamada
Keyword(s):  
Mechanical Properties ◽  
Inconel 718 ◽  
Tensile Tests ◽  
Optical Microscope ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Inconel 718 Alloy ◽  
Powder Bed ◽  
Back Scattering ◽  
Solidification Crack

This paper focuses on the laser weldability of additively manufactured (AM) Inconel 718. The experiments of this research were conducted on different series of AM Inconel 718 alloy, i.e. as­-built, heat­ treated (HT), and HT after welding, and comprehensively characterized using optical microscope and electron back scattering diffraction (EBSD). The weld morphology and microstruc­tural evolution of the fusion zone were recorded. The mechanical properties of the welded AM Inconel 718 were evaluated by tensile tests and hardness measurements. It was found that solidification crack and micropore defects are induced in the as­built AM Inconel 718. However, defect­free weld was promoted in the HT alloy. The changes in hardness profiles and tensile strength under the experimen­tal parameters were further reported. Homogenous hardness of 500 HV across the weld was obtained when HT was applied after the LW.

Evaluation of the Material Properties of the Ti and CoCr Alloys Prepared by Laser Powder Bed Fusion

2020 ◽  
Vol 985 ◽  
pp. 223-228
Author(s):  
Jana Bidulská ◽  
Róbert Bidulský ◽  
Patrik Petrouse ◽  
Tibor Kvačkaj ◽  
Marco Actis Grande ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Image Analysis ◽  
Additive Manufacturing ◽  
Material Properties ◽  
Ti6al4v Alloy ◽  
Homogeneous Distribution ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Quantitative Image

The main aim of the present paper is evaluated the mechanical properties, microstructures and porosity of Ti6Al4V and CoCrW alloys produced by Laser Powder Bed Fusion (L-PBF) as an additive manufacturing (AM) technology. The mechanical properties were follows: For Ti6Al4V alloy the UTS was 1180 MPa; the YS was in the range <600; 745 MPa>. For CoCrW alloys, the UTS were in range <750; 950 MPa> and YS was in range <400; 500>. Evaluation of porosity was realized on non-etched samples using by quantitative image analysis in order to describe the dimensional and morphological porosity characteristics. The pores in the Ti6Al4V alloy showed homogeneous distribution without significant large pores.

scholarly journals Structure and Properties of Ti/Ti64 Graded Material Manufactured by Laser Powder Bed Fusion

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6140
Author(s):  
Evgenii Borisov ◽  
Igor Polozov ◽  
Kirill Starikov ◽  
Anatoly Popovich ◽  
Vadim Sufiiarov
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Additive Manufacturing ◽  
Hot Isostatic Pressing ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Isostatic Pressing ◽  
Graded Material ◽  
Single Part

Multimaterial additive manufacturing is an attractive way of producing parts with improved functional properties by combining materials with different properties within a single part. Pure Ti provides a high ductility and an improved corrosion resistance, while the Ti64 alloy has a higher strength. The combination of these alloys within a single part using additive manufacturing can be used to produce advanced multimaterial components. This work explores the multimaterial Laser Powder Bed Fusion (L-PBF) of Ti/Ti64 graded material. The microstructure and mechanical properties of Ti/Ti64-graded samples fabricated by L-PBF with different geometries of the graded zones, as well as different effects of heat treatment and hot isostatic pressing on the microstructure of the bimetallic Ti/Ti64 samples, were investigated. The transition zone microstructure has a distinct character and does not undergo significant changes during heat treatment and hot isostatic pressing. The tensile tests of Ti/Ti64 samples showed that when the Ti64 zones were located along the sample, the ratio of cross-sections has a greater influence on the mechanical properties than their shape and location. The presented results of the investigation of the graded Ti/Ti64 samples allow tailoring properties for the possible applications of multimaterial parts.

Sign in / Sign up

Export Citation Format

Share Document