scholarly journals Back‐contacted carrier injection for scalable GaN light emitters

2021 ◽  
Author(s):  
Iurii Kim ◽  
Christoffer Kauppinen ◽  
Ivan Radevici ◽  
Pyry Kivisaari ◽  
Jani Oksanen
Keyword(s):  
Carrier Injection ◽  
Light Emitters

Investigation of spin-polarized carrier injection effect in|YBa2Cu3O7/SrTiO3/La0.67/Sr0.33MnO3 and YBa2Cu3O7/La0.67Sr0.33MnO3 heterostructures

2001 ◽  
Vol 11 (PR11) ◽  
pp. Pr11-53-Pr11-57
Author(s):  
B. Vengalis ◽  
V. Plausinaitiene ◽  
A. Abrutis ◽  
Z. Saltyte ◽  
R. Butkute ◽  
...  
Keyword(s):  
Carrier Injection ◽  
Spin Polarized ◽  
Injection Effect

Injecting Inter-Layers and the Built-in Potential of Blue Polymer Light-Emitting Diodes

2000 ◽  
Vol 660 ◽  
Author(s):  
Thomas M. Brown ◽  
Ian S. Millard ◽  
David J. Lacey ◽  
Jeremy H. Burroughes ◽  
Richard H. Friend ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Light Emitting Diodes ◽  
Basic Structure ◽  
Thin Layers ◽  
Carrier Injection ◽  
Semiconducting Polymer ◽  
Light Emitting ◽  
Physical Mechanisms ◽  
Organic Solid ◽  
Polymer Light Emitting Diodes

ABSTRACTThe semiconducting-polymer/injecting-electrode heterojunction plays a crucial part in the operation of organic solid state devices. In polymer light-emitting diodes (LEDs), a common fundamental structure employed is Indium-Tin-Oxide/Polymer/Al. However, in order to fabricate efficient devices, alterations to this basic structure have to be carried out. The insertion of thin layers, between the electrodes and the emitting polymer, has been shown to greatly enhance LED performance, although the physical mechanisms underlying this effect remain unclear. Here, we use electro-absorption measurements of the built-in potential to monitor shifts in the barrier height at the electrode/polymer interface. We demonstrate that the main advantage brought about by inter-layers, such as poly(ethylenedioxythiophene)/poly(styrene sulphonic acid) (PEDOT:PSS) at the anode and Ca, LiF and CsF at the cathode, is a marked reduction of the barrier to carrier injection. The electro- absorption results also correlate with the electroluminescent characteristics of the LEDs.

Controlled Injection of Holes into ALQ3 Based Oleds by Means of An Oxidized Transport Layer

2001 ◽  
Vol 708 ◽  
Author(s):  
Mathew K. Mathai ◽  
Keith A. Higginson ◽  
Bing R. Hsieh ◽  
Fotios Papadimitrakopoulos
Keyword(s):  
Indium Tin Oxide ◽  
Oxidative Degradation ◽  
Transport Layer ◽  
Hole Injection ◽  
Carrier Injection ◽  
Salt Loading ◽  
Light Emitting ◽  
Hole Transporting ◽  
Intrinsic Degradation ◽  
Variable Conductivity

ABSTRACTIn this paper we report a method for tuning the extent of hole injection into the active light emitting tris- (8-hydroxyquinoline) aluminum (Alq3) layer in organic light emitting diodes (OLEDs). This is made possible by modifying the indium tin oxide (ITO) anode with an oxidized transport layer (OTL) comprising a hole transporting polycarbonate of N,N'-bis(3-hydroxymethyl)-N,N'-bis(phenyl) benzidine and diethylene glycol (PC-TPB-DEG) doped with varying concentrations of antimonium hexafluoride salt of N,N,N',N'-tetra-p-tolyl-4,4'-biphenyldiamine (TMTPD+ SbF6-). The conductivity of the OTL can be changed over three orders of magnitude depending on salt loading. The analysis of hole and electron current variations in these devices indicates that optimizing the conductivity of the OTL enables the modulation of hole injection into the Alq3 layer. The bipolar charge transport properties for OLEDs in which the interfacial carrier injection barriers have been minimized, are governed by the conductivities of the respective layers and in this case it is shown that the variable conductivity of the OTL does allow for better control of the same. Accordingly, varying the concentration of holes in the device indicates that beyond an optimum concentration of holes, further hole injection results in the formation of light quenching cationic species and the initiation of oxidative degradation processes in the Alq3 layer, thus accelerating the intrinsic degradation of these devices. The variable conductivity of the OTL can hence be used to minimize the occurrence of these processes.

Analysis of Hot Carrier Injection According to Gate Length

2019 ◽  
Vol 19 (10) ◽  
pp. 6746-6749 ◽  
Author(s):  
Taejin Jang ◽  
Myung-Hyun Baek ◽  
Min-Woo Kwon ◽  
Sungmin Hwang ◽  
Jeesoo Chang ◽  
...  
Keyword(s):  
Gate Length ◽  
Carrier Injection ◽  
Hot Carrier ◽  
Hot Carrier Injection

ZnCdO/ZnMgO and ZnO/AlGaN Heterostructures for UV and Visible Light Emitters

2005 ◽  
Vol 892 ◽  
Author(s):  
Andrei Osinsky ◽  
Jianwei Dong ◽  
J. Q. Xie ◽  
B. Hertog ◽  
A. M. Dabiran ◽  
...  
Keyword(s):  
Molecular Beam ◽  
Compositional Analysis ◽  
Optical Emission ◽  
Rf Plasma ◽  
Light Emitters ◽  
Time Resolved ◽  
Light Emitting ◽  
Spatially Resolved ◽  
Time Resolved Photoluminescence ◽  
Made In

AbstractThis paper reviews of some of the progress made in the development of ZnO-based light emitting diodes (LEDs). n-ZnO/p-AlGaN-based heterostructures have been successfully for the fabrication of UV emitting LEDs that have operated at temperatures up to 650K, suggesting an excitonic origin for the optical transitions. RF-plasma-assisted molecular beam epitaxy has been used to grow epitaxial CdxZn1-xO films on GaN/sapphire structure. These films have a single-crystal wurtzite structure as demonstrated by structural and compositional analysis. High quality CdxZn1-xO films were grown with up to x=0.78 mole fraction as determined by RBS and SIMS techniques. Optical emission ranging from purple (Cd0.05Zn0.95O) to yellow (Cd0.29Zn0.71O) was observed. Compositional fluctuations in a Cd0.16Zn0.84O films were not detected by spatially resolved CL measurements, although intensity fluctuation with features of ∼0.5 μm diameter were seen on the intensity maps. Time resolved photoluminescence shows multi-exponential decay with 21 psec. and 49±3 psec. lifetimes, suggesting that composition micro-fluctuations may be present in Cd0.16Zn0.84O film.

scholarly journals Role of dislocations in nitride laser diodes with different indium content

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Agata Bojarska-Cieślińska ◽  
Łucja Marona ◽  
Julita Smalc-Koziorowska ◽  
Szymon Grzanka ◽  
Jan Weyher ◽  
...  
Keyword(s):  
Quantum Wells ◽  
Defect Density ◽  
Laser Diodes ◽  
Diffusion Path ◽  
Vapour Phase ◽  
Indium Content ◽  
Nonradiative Recombination ◽  
Light Emitters ◽  
Vapour Phase Epitaxy

AbstractIn this work we investigate the role of threading dislocations in nitride light emitters with different indium composition. We compare the properties of laser diodes grown on the low defect density GaN substrate with their counterparts grown on sapphire substrate in the same epitaxial process. All structures were produced by metalorganic vapour phase epitaxy and emit light in the range 383–477 nm. We observe that intensity of electroluminescence is strong in the whole spectral region for devices grown on GaN, but decreases rapidly for the devices on sapphire and emitting at wavelength shorter than 420 nm. We interpret this behaviour in terms of increasing importance of dislocation related nonradiative recombination for low indium content structures. Our studies show that edge dislocations are the main source of nonradiative recombination. We observe that long wavelength emitting structures are characterized by higher average light intensity in cathodoluminescence and better thermal stability. These findings indicate that diffusion path of carriers in these samples is shorter, limiting the amount of carriers reaching nonradiative recombination centers. According to TEM images only mixed dislocations open into the V-pits, usually above the multi quantum wells thus not influencing directly the emission.

scholarly journals In-Plane Monolithic Integration of Scaled III-V Photonic Devices

2021 ◽  
Vol 11 (4) ◽  
pp. 1887
Author(s):  
Markus Scherrer ◽  
Noelia Vico Triviño ◽  
Svenja Mauthe ◽  
Preksha Tiwari ◽  
Heinz Schmid ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
High Speed ◽  
Low Cost ◽  
Photonic Devices ◽  
Monolithic Integration ◽  
Light Emitters ◽  
Fully Integrated ◽  
Large Lattice ◽  
Hybrid Iii ◽  
Gain Material

It is a long-standing goal to leverage silicon photonics through the combination of a low-cost advanced silicon platform with III-V-based active gain material. The monolithic integration of the III-V material is ultimately desirable for scalable integrated circuits but inherently challenging due to the large lattice and thermal mismatch with Si. Here, we briefly review different approaches to monolithic III-V integration while focusing on discussing the results achieved using an integration technique called template-assisted selective epitaxy (TASE), which provides some unique opportunities compared to existing state-of-the-art approaches. This method relies on the selective replacement of a prepatterned silicon structure with III-V material and thereby achieves the self-aligned in-plane monolithic integration of III-Vs on silicon. In our group, we have realized several embodiments of TASE for different applications; here, we will focus specifically on in-plane integrated photonic structures due to the ease with which these can be coupled to SOI waveguides and the inherent in-plane doping orientation, which is beneficial to waveguide-coupled architectures. In particular, we will discuss light emitters based on hybrid III-V/Si photonic crystal structures and high-speed InGaAs detectors, both covering the entire telecom wavelength spectral range. This opens a new path towards the realization of fully integrated, densely packed, and scalable photonic integrated circuits.

Sign in / Sign up

Export Citation Format

Share Document