4.2: Invited Paper: OLCD: a low cost, area‐scalable manufacturing process for flexible displays

2019 ◽  
Vol 50 (S1) ◽  
pp. 48-48
Author(s):  
Paul Cain
Keyword(s):  
Manufacturing Process ◽  
Low Cost ◽  
Flexible Displays

Low Cost Manufacturing Process of Y-Channel Active Microfluidic Mixing Device Using 3D Printing Machine

2021 ◽  
Author(s):  
Mohammad Salman Parvez ◽  
Md. Fazlay Rubby ◽  
Shanzida Kabir ◽  
Nazmul Islam
Keyword(s):  
3D Printing ◽  
Manufacturing Process ◽  
Low Cost ◽  
Microfluidic Mixing ◽  
Low Cost Manufacturing ◽  
Printing Machine

Production of Metal Matrix Composite Using a Bottom Tapping Stir Casting Furnace

2015 ◽  
Vol 772 ◽  
pp. 263-267 ◽  
Author(s):  
Ramanathan Arunachalam ◽  
Majid Al-Maharbi ◽  
Yahya Al Kiyumi ◽  
Elyas Aal-Thani ◽  
Mohammed Al Mafraji
Keyword(s):  
Continuous Improvement ◽  
Manufacturing Process ◽  
Metal Matrix ◽  
Low Cost ◽  
Casting Process ◽  
Stir Casting ◽  
Matrix Composites ◽  
High Quality ◽  
Reinforcement Material ◽  
Low Cost Manufacturing

Metal matrix composites (MMC's) have attracted the attention of researchers for quite some time. In the last 15 years, many studies have been reported in this field of MMC production through various routes. The most commonly used process for producing MMC is stir casting process whereby the reinforcement material is incorporated into the molten metal by stirring. It is a relatively low cost manufacturing process that is capable of producing high quality MMC. However, the process is associated with issues such as attaining uniform distribution of particles, wettability between particles and porosity in the MMCs. Because of these challenges, there has been continuous improvement in the process as well as the design of the furnace. In this research, an innovatively designed bottom tapping furnace has been used to produce the MMCs and the produced sample is characterized.

scholarly journals Design and Implementation of SCADA System for Sugar Production Line

2019 ◽  
Vol 15 (2) ◽  
pp. 80-88
Author(s):  
Noor N. N. Abdulsattar ◽  
Faiz F. Mustafa ◽  
Suha M. Hadi
Keyword(s):  
Manufacturing Process ◽  
Production Line ◽  
Sugar Industry ◽  
Low Cost ◽  
Programmable Logic ◽  
Sugar Production ◽  
Design And Implementation ◽  
Selector Switch ◽  
Scada System ◽  
Plc Programming

SCADA is the technology that allows the operator to gather data from one or more various facilities and to send control instructions to those facilities.  This paper represents an adaptable and low cost SCADA system for a particular sugar manufacturing process, by using Programmable Logic Controls (Siemens s7-1200, 1214Dc/ Dc/ Rly). The system will control and monitor the laboratory production line chose from sugar industry. The project comprises of two sections the first one is the hardware section that has been designed, and built using components suitable for making it for laboratory purposes, and the second section was the software as the PLC programming, designing the HMI, creating alarms and trending system. The system will have two HMI screens according to the two operating states of system (Automatic and Manual), the operator can choose between them by a selector switch, this method helps the operators when fixing a failure and wanting to check it without operating all the process. The result has accomplished the goals of controlling, the parameters (temperature, flow, humidity) were monitored, failure was detected by an alarm.

scholarly journals 319 Development of low cost manufacturing process for Titanium matrix composite blade

2000 ◽  
Vol 2000.8 (0) ◽  
pp. 125-126
Author(s):  
Takeshi YAMADA ◽  
Takayuki TSUZUKU ◽  
Masashi HIROTA ◽  
Yukio KAWACHI ◽  
Shinichi YAMAMOTO
Keyword(s):  
Matrix Composite ◽  
Manufacturing Process ◽  
Low Cost ◽  
Titanium Matrix ◽  
Titanium Matrix Composite ◽  
Composite Blade ◽  
Low Cost Manufacturing

scholarly journals Low-Cost Additive Manufacturing Techniques Applied to the Design of Planar Microwave Circuits by Fused Deposition Modeling

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1946 ◽  
Author(s):  
Héctor García-Martínez ◽  
Ernesto Ávila-Navarro ◽  
Germán Torregrosa-Penalva ◽  
Alberto Rodríguez-Martínez ◽  
Carolina Blanco-Angulo ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Microwave Frequency ◽  
Microwave Circuits ◽  
Fused Deposition ◽  
Microwave Electronic ◽  
Deposition Modeling ◽  
Manufacturing Techniques

This work presents a study on the implementation and manufacturing of low-cost microwave electronic circuits, made with additive manufacturing techniques using fused deposition modeling (FDM) technology. First, the manufacturing process of substrates with different filaments, using various options offered by additive techniques in the manufacture of 3D printing parts, is described. The implemented substrates are structurally analyzed by ultrasound techniques to verify the correct metallization and fabrication of the substrate, and the characterization of the electrical properties in the microwave frequency range of each filament is performed. Finally, standard and novel microwave filters in microstrip and stripline technology are implemented, making use of the possibilities offered by additive techniques in the manufacturing process. The designed devices were manufactured and measured with good results, which demonstrates the possibility of using low-cost 3D printers in the design process of planar microwave circuits.

Low-cost mirror substrates: manufacturing process evolution

1997 ◽  
Author(s):  
Francois Rosala ◽  
Michele Meyer ◽  
Jean-Sebastien Bes de Berc ◽  
Andre Roussel ◽  
Emmanuel Beriot
Keyword(s):  
Manufacturing Process ◽  
Low Cost
Sign in / Sign up

Export Citation Format

Share Document