Principal Component-based Anomaly Detection Scheme

Author(s):  
Mei-Ling Shyu ◽  
Shu-Ching Chen ◽  
Kanoksri Sarinnapakorn ◽  
LiWu Chang
Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 8017
Author(s):  
Nurfazrina M. Zamry ◽  
Anazida Zainal ◽  
Murad A. Rassam ◽  
Eman H. Alkhammash ◽  
Fuad A. Ghaleb ◽  
...  

Wireless Sensors Networks have been the focus of significant attention from research and development due to their applications of collecting data from various fields such as smart cities, power grids, transportation systems, medical sectors, military, and rural areas. Accurate and reliable measurements for insightful data analysis and decision-making are the ultimate goals of sensor networks for critical domains. However, the raw data collected by WSNs usually are not reliable and inaccurate due to the imperfect nature of WSNs. Identifying misbehaviours or anomalies in the network is important for providing reliable and secure functioning of the network. However, due to resource constraints, a lightweight detection scheme is a major design challenge in sensor networks. This paper aims at designing and developing a lightweight anomaly detection scheme to improve efficiency in terms of reducing the computational complexity and communication and improving memory utilization overhead while maintaining high accuracy. To achieve this aim, one-class learning and dimension reduction concepts were used in the design. The One-Class Support Vector Machine (OCSVM) with hyper-ellipsoid variance was used for anomaly detection due to its advantage in classifying unlabelled and multivariate data. Various One-Class Support Vector Machine formulations have been investigated and Centred-Ellipsoid has been adopted in this study due to its effectiveness. Centred-Ellipsoid is the most effective kernel among studies formulations. To decrease the computational complexity and improve memory utilization, the dimensions of the data were reduced using the Candid Covariance-Free Incremental Principal Component Analysis (CCIPCA) algorithm. Extensive experiments were conducted to evaluate the proposed lightweight anomaly detection scheme. Results in terms of detection accuracy, memory utilization, computational complexity, and communication overhead show that the proposed scheme is effective and efficient compared few existing schemes evaluated. The proposed anomaly detection scheme achieved the accuracy higher than 98%, with (𝑛𝑑) memory utilization and no communication overhead.


TAPPI Journal ◽  
2014 ◽  
Vol 13 (1) ◽  
pp. 33-41
Author(s):  
YVON THARRAULT ◽  
MOULOUD AMAZOUZ

Recovery boilers play a key role in chemical pulp mills. Early detection of defects, such as water leaks, in a recovery boiler is critical to the prevention of explosions, which can occur when water reaches the molten smelt bed of the boiler. Early detection is difficult to achieve because of the complexity and the multitude of recovery boiler operating parameters. Multiple faults can occur in multiple components of the boiler simultaneously, and an efficient and robust fault isolation method is needed. In this paper, we present a new fault detection and isolation scheme for multiple faults. The proposed approach is based on principal component analysis (PCA), a popular fault detection technique. For fault detection, the Mahalanobis distance with an exponentially weighted moving average filter to reduce the false alarm rate is used. This filter is used to adapt the sensitivity of the fault detection scheme versus false alarm rate. For fault isolation, the reconstruction-based contribution is used. To avoid a combinatorial excess of faulty scenarios related to multiple faults, an iterative approach is used. This new method was validated using real data from a pulp and paper mill in Canada. The results demonstrate that the proposed method can effectively detect sensor faults and water leakage.


Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 483
Author(s):  
Francisco J. Rivero ◽  
Leonardo Ciaccheri ◽  
M. Lourdes González-Miret ◽  
Francisco J. Rodríguez-Pulido ◽  
Andrea A. Mencaglia ◽  
...  

Overripe seeds from sun-dried grapes submitted to postharvest dehydration constitute a scarcely investigated class of vinification byproduct with limited reports on their phenolic composition and industrial applications. In this study, Raman spectroscopy was applied to characterize a selection of overripe seed byproducts from different white grapes (cv. Moscatel, cv. Pedro Ximénez and cv. Zalema) submitted to postharvest sun drying. The Raman measurements were taken using a 1064 nm excitation laser in order to mitigate the fluorescent effect and the dispersive detection scheme allowed a compactness of the optical system. Spectroscopic data were processed by a principal component analysis to reduce the dimensionality and partner recognition. The evolution of the Raman spectrum during the overripening process was compared with the phenolic composition of grape seeds, which was determined by rapid resolution liquid chromatography/mass spectrometry (RRLC/MS). A multivariate processing of the spectroscopic data allowed the classification of overripe seeds according to the grape variety and the monitoring of stages of the postharvest sun drying process.


IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 226397-226408
Author(s):  
Mingxu Jin ◽  
Aoran Lv ◽  
Yuanpeng Zhu ◽  
Zijiang Wen ◽  
Yubin Zhong ◽  
...  

Author(s):  
Xu Liu ◽  
Weiyou Liu ◽  
Xiaoqiang Di ◽  
Jinqing Li ◽  
Binbin Cai ◽  
...  

2018 ◽  
Vol 55 (8) ◽  
pp. 081002
Author(s):  
杨桄 Yang Guang ◽  
向英杰 Xiang Yingjie ◽  
王琪 Wang Qi ◽  
田张男 Tian Zhangnan

Sign in / Sign up

Export Citation Format

Share Document