scholarly journals Heat Transfer, Newton’s Law of Cooling and the Law of Entropy Increase Simulated by the Real-Time Computer Experiment in Java

Author(s):  
Adam Galant ◽  
Ryszard Kutner ◽  
Andrzej Majerowski
2009 ◽  
Vol 62 (6) ◽  
Author(s):  
K. C. Cheng

The exact mathematical analogy exists between Newton’s law of cooling and Proposition II, Book II (The motion of bodies in resisting mediums) of the Principia. Several approaches for the proof of Proposition II are presented based on the expositions available in the historical literature. The relationships among Napier’s logarithms (1614), Euclid’s geometric progression (300 B.C.), and Newton’s law of cooling (1701) are explored. Newton’s legacy in the thermofluid sciences is discussed in the light of current knowledge. His characteristic parameter for the temperature fall ratio, ΔT/(T−T∞), is noted. The relationships and connections among Newton’s cooling law (1701), Fourier’s heat conduction theory (1822), and Carnot’s theorem (1824)based on temperature difference (ΔT) as a driving force are noted. After tracing the historical origins of Newton’s law of cooling, this article discusses some aspects of the historical development of the heat transfer subject from Newton to the time of Nusselt and Prandtl. Newton’s legacy in heat transfer remains in the form of the concept of heat transfer coefficient for conduction, convection, and radiation problems. One may conclude that Newton was apparently aware of the analogy of his cooling law to the low Reynolds number motion of a body in a viscous fluid otherwise at rest, i.e., its drag is approximately proportional to its velocity.


2007 ◽  
Vol 26-28 ◽  
pp. 1015-1018
Author(s):  
L. Yang ◽  
Jian Cheng Fang ◽  
Zhi Yu Zhao ◽  
Y.Q. Gao

The quality of coatings is directly influenced by the flattening and solidification of many individual molten droplets in plasma spray forming, so many properties such as thermal, electrical, mechanical etc are strongly linked to the real contact between the “piled-up” splats. The research on the transient temperature of impacting droplets and the heat transfer between droplets and substrate plays an important role in improving the quality of coatings. Because of complexity and high cost of temperature measurement systems for molten droplet during flattening in plasma spray forming at present, this paper presents a new kind of simulation measurement system for transient temperature of spray droplets when impacting on substrate based on LabVIEW, which could display the real-time changes of the temperature by waveform graph. Finally, the experiments were carried out on Pb-Sn alloy molten droplets to reveal the close connection between the impacting droplets temperature changes and the coatings quality, and the heat transfer between droplets and substrate was discussed.


2020 ◽  
Vol 66 (2 Mar-Apr) ◽  
pp. 224
Author(s):  
J. Rosales-García ◽  
J. A. Andrade-Lucio ◽  
O. Shulika

It has been proved that the integer order dierential equation does notrepresent the real behaviour of nature for the Newton's law of cooling.Then, we solve the Newton's cooling law using the conformable deriva-tive, as result we obtain the Kohlrausch stretched exponential function.Due to the free parameter 0 < 1, we can t this function with thegraph of the experimental data set. It is shown that the experimental datacoincide with those theoretical when = 0:77269 and k = 0:018765.


1974 ◽  
Vol 67 (2) ◽  
pp. 141-142
Author(s):  
James F. Hurley

Many introductory calculus texts now include a section devoted to applications of the exponential function. The large variety of commonly encountered phenomena whose processes of growth or decay are exponential affords a rich source of interesting and appealing applications. Students who can easily compute the size a century hence of a world population growing continuously at a rate of 2 percent need little further in the way of convincing that calculus can be useful in the real world of today. Problems involving radioactive decay and growth of investments also strike most students as interesting, dealing as they do with questions that, if not familiar, have at least been heard of by most students.


Author(s):  
Gustavo Herrera-Sánchez ◽  
Luz del Carmen Moran-Bravo ◽  
Alejandro Silva-Juárez ◽  
José Luis Gallardo-Navarro

The objective of this study is to solve the problem of the packaging process when handling canned food. In the thermal process the sterilization of the food product is carried out in addition to the cooking, a thermal shock is created to eliminate 100% the microorganisms that can damage the product; in addition it must comply with the NOM-130-SSA1-1995, Goods and services. Food packed in hermetically sealed containers and subjected to heat treatment. The temperature of exit is of 75 ° C, not being pertinent for the handle of the finished product and in agreement with the internal specification of the company, the temperature for the handle and packaging must be of 40 ° C. The methodology used is Newton's Law of Cooling for heat transfer, which states that the rate of heat exchange between an object and its environment is proportional to the temperature difference between the object and the environment. The differential equation is solved and the results obtained are validated with tests in the production line. The main contribution is that science is applied to solve a problem in a production line.


Sign in / Sign up

Export Citation Format

Share Document