Detection of Milling Cutter Insert Fracture Using Vibration Signals

1995 ◽  
pp. 255-260 ◽  
Author(s):  
T. N. Moore ◽  
R. Kiss
Keyword(s):  
Milling Cutter ◽  
Vibration Signals

COMPOUND FAULT DIAGNOSIS OF BEARINGS USING AN IMPROVED SPECTRAL KURTOSIS BY MAXIMUM CORRELATION KURTOSIS DECONVOLUTION (MCKD).

2020 ◽  
Vol 9 (8) ◽  
pp. 66-72
Keyword(s):  
Fault Diagnosis ◽  
Resonance Frequency ◽  
Background Noise ◽  
Maximum Correlation ◽  
Vibration Signals ◽  
Filter Length ◽  
Frequency Bands ◽  
Noise Interference ◽  
Spectral Kurtosis

This paper discusses the use of Maximum Correlation kurtosis deconvolution (MCKD) method as a pre-processor in fast spectral kurtosis (FSK) method in order to find the compound fault characteristics of the bearing, by enhancing the vibration signals. FSK only extracts the resonance bands which have maximum kurtosis value, but sometimes it might possible that faults occur in the resonance bands which has low kurtosis value, also the faulty signals missed due to noise interference. In order to overcome these limitations FSK used with MCKD, MCKD extracts various faults present in different resonance frequency bands; also detect the weak impact component, as MCKD also dealt with strong background noise. By obtaining the MCKD parameters like, filter length & deconvolution period, we can extract the compound fault feature characteristics.

scholarly journals On the Use of Machine Learning to Detect Shocks in Road Vehicle Vibration Signals

2016 ◽  
Vol 30 (8) ◽  
pp. 387-398 ◽  
Author(s):  
Julien Lepine ◽  
Vincent Rouillard ◽  
Michael Sek
Keyword(s):  
Machine Learning ◽  
Road Vehicle ◽  
Vibration Signals

scholarly journals Deep Learning Approach for Vibration Signals Applications

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3929
Author(s):  
Han-Yun Chen ◽  
Ching-Hung Lee
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Parameters Optimization ◽  
Frequency Spectra ◽  
Vibration Signals ◽  
Bearing Faults ◽  
Time Frequency ◽  
And Performance ◽  
The One ◽  
Short Time

This study discusses convolutional neural networks (CNNs) for vibration signals analysis, including applications in machining surface roughness estimation, bearing faults diagnosis, and tool wear detection. The one-dimensional CNNs (1DCNN) and two-dimensional CNNs (2DCNN) are applied for regression and classification applications using different types of inputs, e.g., raw signals, and time-frequency spectra images by short time Fourier transform. In the application of regression and the estimation of machining surface roughness, the 1DCNN is utilized and the corresponding CNN structure (hyper parameters) optimization is proposed by using uniform experimental design (UED), neural network, multiple regression, and particle swarm optimization. It demonstrates the effectiveness of the proposed approach to obtain a structure with better performance. In applications of classification, bearing faults and tool wear classification are carried out by vibration signals analysis and CNN. Finally, the experimental results are shown to demonstrate the effectiveness and performance of our approach.

scholarly journals Analysis method of the cavitation vibration signals in poppet valve based on EEMD

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402199811
Author(s):  
Beibei Li ◽  
Qiao Zhao ◽  
Huaiyi Li ◽  
Xiumei Liu ◽  
Jichao Ma ◽  
...  
Keyword(s):  
Ensemble Empirical Mode Decomposition ◽  
Center Frequency ◽  
Analysis Method ◽  
Vibration Signals ◽  
Poppet Valve ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Cavitation Intensity ◽  
Eemd Method ◽  
Peak Value

To study the vibration characteristics of the poppet valve induced by cavitation, the signal analysis method based on the ensemble empirical mode decomposition (EEMD) method was studied experimentally. The component induced by cavitation was separated from the vibration signals through the EEMD method. The results show that the IMF2 component has the largest amplitude and energy of all components. The root mean square (RMS) value, peak value of marginal spectrum, and center frequency of marginal spectrum of the IMF2 component were studied in detail. The RMS value and the peak value of the marginal spectrum decrease with a decrease of cavitation intensity. The center frequency of marginal spectrum is between 12 kHz and 20 kHz, and the center frequency first increases and then decreases with a decrease of cavitation intensity. The change rate of the center frequency also decreases with an increase of inlet pressure.

scholarly journals Location Detection Method of Detector in Pipeline Using VMD Algorithm and Machine Learning Classifier

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1436
Author(s):  
Tuoru Li ◽  
Senxiang Lu ◽  
Enjie Xu
Keyword(s):  
Machine Learning ◽  
Magnetic Flux ◽  
Magnetic Flux Leakage ◽  
Intrinsic Mode Functions ◽  
Detection Range ◽  
Vibration Signals ◽  
Feature Vectors ◽  
Learning Classifier ◽  
Mode Decomposition ◽  
Flux Leakage

The internal detector in a pipeline needs to use the ground marker to record the elapsed time for accurate positioning. Most existing ground markers use the magnetic flux leakage testing principle to detect whether the internal detector passes. However, this paper uses the method of detecting vibration signals to track and locate the internal detector. The Variational Mode Decomposition (VMD) algorithm is used to extract features, which solves the defect of large noise and many disturbances of vibration signals. In this way, the detection range is expanded, and some non-magnetic flux leakage internal detectors can also be located. Firstly, the extracted vibration signals are denoised by the VMD algorithm, then kurtosis value and power value are extracted from the intrinsic mode functions (IMFs) to form feature vectors, and finally the feature vectors are input into random forest and Multilayer Perceptron (MLP) for classification. Experimental research shows that the method designed in this paper, which combines VMD with a machine learning classifier, can effectively use vibration signals to locate the internal detector and has the characteristics of high accuracy and good adaptability.

Vibration analysis and combustion parameter evaluation of CI engine based on Fourier Decomposition Method

2021 ◽  
pp. 146808742098819
Author(s):  
Wang Yang ◽  
Cheng Yong
Keyword(s):  
Vibration Analysis ◽  
Decomposition Method ◽  
Combustion Process ◽  
Pressure Rise ◽  
Maximum Pressure ◽  
Vibration Signals ◽  
Loop Control ◽  
Fourier Decomposition ◽  
Surface Vibration ◽  
Rise Rate

As a non-intrusive method for engine working condition detection, the engine surface vibration contains rich information about the combustion process and has great potential for the closed-loop control of engines. However, the measured engine surface vibration signals are usually induced by combustion as well as non-combustion excitations and are difficult to be utilized directly. To evaluate some combustion parameters from engine surface vibration, the tests were carried out on a single-cylinder diesel engine and a new method called Fourier Decomposition Method (FDM) was used to extract combustion induced vibration. Simulated and test results verified the ability of the FDM for engine vibration analysis. Based on the extracted vibration signals, the methods for identifying start of combustion, location of maximum pressure rise rate, and location of peak pressure were proposed. The cycle-by-cycle analysis of the results show that the parameters identified based on vibration and in-cylinder pressure have the similar trends, and it suggests that the proposed FDM-based methods can be used for extracting combustion induced vibrations and identifying the combustion parameters.

Sign in / Sign up

Export Citation Format

Share Document