Chemical Changes during Extrusion Cooking

Author(s):  
Mary Ellen Camire
2020 ◽  
Vol 16 (4) ◽  
pp. 592-600
Author(s):  
Sajad A. Wani ◽  
Tariq A. Bhat ◽  
Nawaz A. Ganie ◽  
Pradyuman Kumar

Background: The extrusion cooking is the most widely used process so the development and consumption of extruded snack products having health and nutritious benefits would help increase the health status of the population. Objective: The aim of this study was to investigate the effect of storage days on physical, microbial activity and sensory characteristics of extruded snacks and kinetics of extruded snacks. Methods: Extruded snacks were produced by extrusion cooking at optimized conditions of temperature, moisture and screw speed of 110°C, 12% (db) and 200 rpm. The products were packed in lowdensity polyethylene (LDPE) and laminated pouches (LP) and were stored at an accelerated temperature condition of 40 ± 2°C. The storage stability in terms of quality parameters such as moisture, hardness, bulk density, color, lateral expansion, sensory characteristics and total plate count was investigated. Results: An increase (p≤0.05) in the value of moisture, bulk density, a*, and total plate count was observed during the storage period, whereas hardness, L*, b*, ΔE and sensory characteristics showed significant (p≤0.05) decreased order with storage period. No significant effect on the lateral expansion of the extruded product was observed. A significant decrease in total carbohydrate, fat and protein content was found during the storage period. The average sensory score and microbial analysis suggested that extruded snacks packed in LDPE pouches can only be acceptable up to the 60th day and extruded snacks packed in LP can be acceptable to more than 90th day. The kinetics of color and hardness suggest first order kinetics. Conclusion: Overall investigation suggested that extruded snacks were more stable in the LP as compared to LDPE pouches.


2019 ◽  
Author(s):  
Jeremy Scott ◽  
◽  
Jennifer R. Callanan ◽  
Jonathan Harris ◽  
Ryan Wizner ◽  
...  
Keyword(s):  

Author(s):  
Atila Francisco Mógor ◽  
Juliana Oliveira Amatussi ◽  
Gilda Mógor ◽  
Luiz Gabriel Gemin

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 833
Author(s):  
Edina Preklet ◽  
László Tolvaj ◽  
Eszter Visi-Rajczi ◽  
Tamás Hofmann

The goal of this research was the systematic study and comparison of the divided individual effects of UV light irradiation and water leaching during artificial weathering. Spruce (Picea abies Karst.) and Scots pine (Pinus sylvestris L.) samples were irradiated by ultraviolet (UV) light. Another sequence of samples was treated with the combination of UV irradiation and water leaching. The total extent of UV treatment was 20 days for both series of samples. Time relation of UV irradiation and water leaching was 2:1. The chemical changes were observed by FTIR spectroscopy. The difference spectrum was used for determination of the chemical changes. Degradation of lignin was greater for the leached samples than for the pure UV treated samples. Scots pine suffered greater lignin degradation than spruce, and produced higher absorption increase on the absorption region of unconjugated carbonyls. The unconjugated carbonyl groups were the most responsive chemical elements to leaching. Spruce was more susceptible to leaching of unconjugated carbonyl groups than Scots pine. Two absorption bands of unconjugated carbonyl groups at 1706 and 1764 cm−1 wavenumbers were produced by photodegradation. The absorption band at 1764 cm−1 was more sensitive to water leaching than the band at 1706 cm−1.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 728
Author(s):  
David Donnermeyer ◽  
Magdalena Ibing ◽  
Sebastian Bürklein ◽  
Iris Weber ◽  
Maximilian P. Reitze ◽  
...  

The aim of this study was to gain information about the effect of thermal treatment of calcium silicate-based sealers. BioRoot RCS (BR), Total Fill BC Sealer (TFBC), and Total Fill BC Sealer HiFlow (TFHF) were exposed to thermal treatment at 37 °C, 47 °C, 57 °C, 67 °C, 77 °C, 87 °C and 97 °C for 30 s. Heat treatment at 97 °C was performed for 60 and 180 s to simulate inappropriate application of warm obturation techniques. Thereafter, specimens were cooled to 37 °C and physical properties (setting time/flow/film thickness according to ISO 6876) were evaluated. Chemical properties (Fourier-transform infrared spectroscopy) were assessed after incubation of the specimens in an incubator at 37 °C and 100% humidity for 8 weeks. Statistical analysis of physical properties was performed using the Kruskal-Wallis-Test (P = 0.05). The setting time, flow, and film thickness of TFBC and TFHF were not relevantly influenced by thermal treatment. Setting time of BR decreased slightly when temperature of heat application increased from 37 °C to 77 °C (P < 0.05). Further heat treatment of BR above 77 °C led to an immediate setting. FT-IR spectroscopy did not reveal any chemical changes for either sealers. Thermal treatment did not lead to any substantial chemical changes at all temperature levels, while physical properties of BR were compromised by heating. TFBC and TFHF can be considered suitable for warm obturation techniques.


Geoderma ◽  
2021 ◽  
Vol 400 ◽  
pp. 115158
Author(s):  
Claudio R. Mujica ◽  
Sergio A. Bea ◽  
Esteban G. Jobbágy

Sign in / Sign up

Export Citation Format

Share Document