Acoustic Diagnostics for Determining the Appearance of Corona Discharge

2021 ◽  
pp. 127-157
Author(s):  
Oleg G. Gryb ◽  
Ihor T. Karpaliuk ◽  
Artur O. Zaporozhets ◽  
Sergiy V. Shvets ◽  
Natalia V. Rudevich
Keyword(s):  
Corona Discharge ◽  
Acoustic Diagnostics

Use of the electro-separation method for improvement of the utility value of winter rapeseeds

2013 ◽  
Vol 27 (4) ◽  
pp. 419-424 ◽  
Author(s):  
S.J. Kovalyshyn ◽  
O.P. Shvets ◽  
S. Grundas ◽  
J. Tys
Keyword(s):  
Corona Discharge ◽  
Mechanical Damage ◽  
Edible Oil ◽  
Separation Method ◽  
Utility Value ◽  
X Ray ◽  
Winter Rapeseed ◽  
The Mean ◽  
Discharge Field ◽  
Prototype Apparatus

Abstract The paper presents the results of a study of the use of electro-separation methods for improvement of the utility value of 5 winter rapeseed cultivars. The process of electro-separation of rapeseed was conducted on a prototype apparatus built at the Laboratory of Application of Electro-technologies in Agriculture, Lviv National Agriculture University. The process facilitated separation of damaged, low quality seeds from the sowing material. The initial mean level of mechanically damaged seeds in the winter rapeseed cultivars studied varied within the range of 15.8-20.1%. Verification of the amount of seeds with mechanical damage was performed on X-ray images of seeds acquired by means of a digital X-ray apparatus. In the course of analysis of the X-ray images, it was noted that the mean level of mechanical damage to the seeds after the electro-separation was in the range of 2.1-3.8%. The application of the method of separation of rapeseeds in the corona discharge field yielded a significant reduction of the level of seeds with mechanical damage. The application of the method in practice may effectively contribute to improvement of the utility value of sowing material or seed material for production of edible oil.

Audiosonic Acoustic Detection of Air Corona Discharge based on Fast Fourier Transform

2019 ◽  
Author(s):  
Mochammad Wahyudi ◽  
Tumiran Tumiran ◽  
I Made Yulistya Negara ◽  
Noor Akhmad Setiawan ◽  
Bambang Sugiyantoro
Keyword(s):  
Fourier Transform ◽  
Fast Fourier Transform ◽  
Corona Discharge ◽  
Acoustic Detection

scholarly journals Post-Plasma Catalysis for Trichloroethylene Abatement with Ce-Doped Birnessite Downstream DC Corona Discharge Reactor

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 946
Author(s):  
Grêce Abdallah ◽  
Jean-Marc Giraudon ◽  
Rim Bitar ◽  
Nathalie De Geyter ◽  
Rino Morent ◽  
...  
Keyword(s):  
Corona Discharge ◽  
Active Oxygen Species ◽  
Surface Acidity ◽  
Good Stability ◽  
Ozone Decomposition ◽  
Moist Air ◽  
Plasma Catalysis ◽  
Dry Air ◽  
Water Tolerance ◽  
By Products

Trichloroethylene (TCE) removal was investigated in a post-plasma catalysis (PPC) configuration in nearly dry air (RH = 0.7%) and moist air (RH = 15%), using, for non-thermal plasma (NTP), a 10-pin-to-plate negative DC corona discharge and, for PPC, Ce0.01Mn as a catalyst, calcined at 400 °C (Ce0.01Mn-400) or treated with nitric acid (Ce0.01Mn-AT). One of the key points was to take advantage of the ozone emitted from NTP as a potential source of active oxygen species for further oxidation, at a very low temperature (100 °C), of untreated TCE and of potential gaseous hazardous by-products from the NTP. The plasma-assisted Ce0.01Mn-AT catalyst presented the best CO2 yield in dry air, with minimization of the formation of gaseous chlorinated by-products. This result was attributed to the high level of oxygen vacancies with a higher amount of Mn3+, improved specific surface area and strong surface acidity. These features also allow the promotion of ozone decomposition efficiency. Both catalysts exhibited good stability towards chlorine. Ce0.01Mn-AT tested in moist air (RH = 15%) showed good stability as a function of time, indicating good water tolerance also.

scholarly journals Oxidation of Aqueous Toluene by Gas-Phase Pulsed Corona Discharge in Air-Water Mixtures Followed by Photocatalytic Exhaust Air Cleaning

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 549
Author(s):  
Maarja Kask ◽  
Marina Krichevskaya ◽  
Sergei Preis ◽  
Juri Bolobajev
Keyword(s):  
Corona Discharge ◽  
Gas Phase ◽  
Contact Time ◽  
Closed Loop ◽  
Simultaneous Treatment ◽  
Pulsed Corona Discharge ◽  
Air Cleaning ◽  
Pulsed Corona ◽  
Volatile Organic ◽  
Gaseous Toluene

The treatment of wastewaters containing hazardous volatile organic compounds (VOCs) requires the simultaneous treatment of both water and air. Refractory toluene, extensively studied for its removal, provides a basis for the comparison of its abatement methods. The oxidation of aqueous toluene by gas-phase pulsed corona discharge (PCD) in combination with the subsequent photocatalytic treatment of exhaust air was studied. The PCD treatment showed unequalled energy efficiencies in aqueous and gaseous toluene oxidation, reaching, respectively, up to 10.5 and 29.6 g·kW−1·h−1. The PCD exhaust air contained toluene residues and ozone in concentrations not exceeding 0.1 and 0.6 mg·L−1, respectively. As a result of the subsequent photocatalytic treatment, both airborne residues were eliminated within a contact time with TiO2 as short as 12 s. The results contribute to the possible application of the studied approach in closed-loop energy-saving ventilation systems.

Direct sequencing of a disulfide-linked peptide with electrospray ionization tandem mass spectrometry

The Analyst ◽  
2015 ◽  
Vol 140 (8) ◽  
pp. 2623-2627 ◽  
Author(s):  
Gongyu Li ◽  
Jiying Pei ◽  
Yue Yin ◽  
Guangming Huang
Keyword(s):  
Mass Spectrometry ◽  
Tandem Mass Spectrometry ◽  
Corona Discharge ◽  
Electrospray Ionization ◽  
Disulfide Bonds ◽  
Direct Sequencing ◽  
Peptide Sequencing ◽  
Tandem Mass ◽  
Esi Ms ◽  
Ionization Tandem Mass Spectrometry

Enhanced corona discharge was employed for in-spray dissociation of disulfide bonds, facilitating disulfide-containing peptide sequencing with ESI-MS/MS.

Sign in / Sign up

Export Citation Format

Share Document