Scaling and Active Surface of Fractal Membranes

1994 ◽  
pp. 251-265 ◽  
Author(s):  
Ricardo Gutfraind ◽  
Bernard Sapoval
Keyword(s):  
Author(s):  
Kailun Yang ◽  
Recep Kas ◽  
Wilson A. Smith

<p>This study evaluated the performance of the commonly used strong buffer electrolytes, i.e. phosphate buffers, during CO<sub>2</sub> electroreduction in neutral pH conditions by using in-situ surface enhanced infrared absorption spectroscopy (SEIRAS). Unfortunately, the buffers break down a lot faster than anticipated which has serious implications on many studies in the literature such as selectivity and kinetic analysis of the electrocatalysts. Increasing electrolyte concentration, surprisingly, did not extend the potential window of the phosphate buffers due to dramatic increase in hydrogen evolution reaction. Even high concentration phosphate buffers (1 M) break down within the potentials (-1 V vs RHE) where hydrocarbons are formed on copper electrodes. We have extended the discussion to high surface area electrodes by evaluating electrodes composed of copper nanowires. We would like highlight that it is not possible to cope with high local current densities on these high surface area electrodes by using high buffer capacity solutions and the CO<sub>2</sub> electrocatalysts are needed to be evaluated by casting thin nanoparticle films onto inert substrates as commonly employed in fuel cell reactions and up to now scarcely employed in CO<sub>2</sub> electroreduction. In addition, we underscore that normalization of the electrocatalytic activity to the electrochemical active surface area is not the ultimate solution due to concentration gradient along the catalyst layer.This will “underestimate” the activity of high surface electrocatalyst and the degree of underestimation will depend on the thickness, porosity and morphology of the catalyst layer. </p> <p> </p>


2018 ◽  
Vol 69 (10) ◽  
pp. 2826-2832
Author(s):  
Ioan Gabriel Sandu ◽  
Viorica Vasilache ◽  
Andrei Victor Sandu ◽  
Marin Chirazi ◽  
Cezar Honceriu ◽  
...  

The saline aerosols generated in gaseous media, as nanodispersions, behave, with respect to the concentration levels and the lifespan, as trimodal distributions (the three domains with Gaussian distributions: fine or Aitken under 50 �m, medium between 50 and 500 mm and, respectively, coarse or large between 500 and 1000 mm). The generation in latent state is dependent on the active surface of the source (number of generator centres, the size and position of the fluorescences, the porosity, size and shape of the source, etc.), the climatic parameters, but also on a series of other characteristics of the gaseous medium. Our team has demonstrated experimentally that saline aerosols, NaCl type, besides the ability to prevent and treat broncho-respiratory and cardiac conditions, through coassistance of saline aerosols of other cations than sodium, and of the iodine anion, have for certain levels of concentrations propitious effects over the immune, bone and muscular systems. Similarly proved has been the positive influence on the development of children, as well the determinant role in increasing athletic performance and of other human subjects performing intense activities.


1991 ◽  
Vol 56 (2) ◽  
pp. 334-343
Author(s):  
Ondřej Wein

Analytical solutions are given to a class of unsteady one-dimensional convective-diffusion problems assuming power-law velocity profiles close to the transport-active surface.


1986 ◽  
Vol 83 ◽  
Author(s):  
S.-C. Lui ◽  
J. M. Mundenar ◽  
E. W. Plummer ◽  
M. E. Mostoller ◽  
R. M. Nicklow ◽  
...  

ABSTRACTSurface and bulk electronic structure of the ordered NiAl alloy were measured using angle resolved photoelectron spectroscopy. The measured bulk d-bands (Ni like) were observed to be narrower than theoretically calculated d band widths which are 20 to 40% wider (depending upon what is used as a measure of the width). At least two surface states were observed on both the (110) and (111) surfaces. The nature of these surface states and their relationship to the bulk band structure is discussed. Dispersion of bulk phonons was measured by neutron scattering and fitted with a fourth nearest neighbor Born-von Karman model. Dipole active surface phonons on the (110) and (111) surfaces were observed by inelastic electron scattering and the frequencies also calculated assuming a truncated bulk surface. The calculated surface modes present a qualitative picture of the atomic displacement at each surface and also show that the surface phonon energy and intensity depends upon the structure of the surface.


Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2553
Author(s):  
Yu Tu ◽  
Weihua Ao ◽  
Chunhong Wang ◽  
Tianyu Ren ◽  
Lijuan Zhang ◽  
...  

Modified microspheres (SiO2-M) were obtained by the hydrolytic modification of silicon dioxide (SiO2) microspheres with Na2SiO3, and then, SiO2-M was used as a carrier to prepare a composite photocatalyst (SiO2-M/TiO2) using the sol-gel method; i.e., nano-TiO2 was loaded on the surface of SiO2-M. The structure, morphology, and photocatalytic properties of SiO2-M/TiO2 were investigated. Besides, the mechanism of the effect of SiO2-M was also explored. The results show that the hydrolytic modification of Na2SiO3 coated the surface of SiO2 microspheres with an amorphous SiO2 shell layer and increased the quantity of hydroxyl groups. The photocatalytic performance of the composite photocatalyst was slightly better than that of pure nano-TiO2 and significantly better than that of the composite photocatalyst supported by unmodified SiO2. Thus, increasing the loading capacity of nano-TiO2, improving the dispersion of TiO2, and increasing the active surface sites are essential factors for improving the functional efficiency of nano-TiO2. This work provides a new concept for the design of composite photocatalysts by optimizing the performance of the carrier.


2021 ◽  
Vol 19 ◽  
pp. 228080002110068
Author(s):  
Hsien-Te Chen ◽  
Hsin-I Lin ◽  
Chi-Jen Chung ◽  
Chih-Hsin Tang ◽  
Ju-Liang He

Here, we present a bone implant system of phase-oriented titanium dioxide (TiO2) fabricated by the micro-arc oxidation method (MAO) on β-Ti to facilitate improved osseointegration. This (101) rutile-phase-dominant MAO TiO2 (R-TiO2) is biocompatible due to its high surface roughness, bone-mimetic structure, and preferential crystalline orientation. Furthermore, (101) R-TiO2 possesses active and abundant hydroxyl groups that play a significant role in enhancing hydroxyapatite formation and cell adhesion and promote cell activity leading to osseointegration. The implants had been elicited their favorable cellular behavior in vitro in the previous publications; in addition, they exhibit excellent shear strength and promote bone–implant contact, osteogenesis, and tissue formation in vivo. Hence, it can be concluded that this MAO R-TiO2 bone implant system provides a favorable active surface for efficient osseointegration and is suitable for clinical applications.


2021 ◽  
Vol 19 (6) ◽  
pp. 2343-2370
Author(s):  
Federico Passeri ◽  
Cesare Comina ◽  
Sebastiano Foti ◽  
Laura Valentina Socco

AbstractThe compilation and maintenance of experimental databases are of crucial importance in all research fields, allowing for researchers to develop and test new methodologies. In this work, we present a flat-file database of experimental dispersion curves and shear wave velocity profiles, mainly from active surface wave testing, but including also data from passive surface wave testing and invasive methods. The Polito Surface Wave flat-file Database (PSWD) is a gathering of experimental measurements collected within the past 25 years at different Italian sites. Discussion on the database content is reported in this paper to evaluate some statistical properties of surface wave test results. Comparisons with other methods for shear wave velocity measurements are also considered. The main novelty of this work is the homogeneity of the PSWD in terms of processing and interpretation methods. A common processing strategy and a new inversion approach were applied to all the data in the PSWD to guarantee consistency. The PSWD can be useful for further correlation studies and is made available as a reference benchmark for the validation and verification of novel interpretation procedures by other researchers.


Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1556
Author(s):  
Stefania Scialla ◽  
Giorgia Martuscelli ◽  
Francesco Nappi ◽  
Sanjeet Singh Avtaar Singh ◽  
Adelaide Iervolino ◽  
...  

Over the years, there has been an increasing number of cardiac and orthopaedic implanted medical devices, which has caused an increased incidence of device-associated infections. The surfaces of these indwelling devices are preferred sites for the development of biofilms that are potentially lethal for patients. Device-related infections form a large proportion of hospital-acquired infections and have a bearing on both morbidity and mortality. Treatment of these infections is limited to the use of systemic antibiotics with invasive revision surgeries, which had implications on healthcare burdens. The purpose of this review is to describe the main causes that lead to the onset of infection, highlighting both the biological and clinical pathophysiology. Both passive and active surface treatments have been used in the field of biomaterials to reduce the impact of these infections. This includes the use of antimicrobial peptides and ionic liquids in the preventive treatment of antibiotic-resistant biofilms. Thus far, multiple in vivo studies have shown efficacious effects against the antibiotic-resistant biofilm. However, this has yet to materialize in clinical medicine.


Sign in / Sign up

Export Citation Format

Share Document