Using Pushover Analysis for Assessment of Buildings and Bridges

2008 ◽  
pp. 91-120 ◽  
Author(s):  
Rui Pinho
Keyword(s):  
Pushover Analysis

Assessment of the Applicability of Pushover Analysis for a Concrete Gravity Dam

2018 ◽  
Vol 9 (5) ◽  
pp. 181
Author(s):  
Machach Laila ◽  
Mouzzoun Mouloud ◽  
Moustachi Oum El Khaiat ◽  
Taleb Ali
Keyword(s):  
Pushover Analysis ◽  
Gravity Dam ◽  
Concrete Gravity Dam

PERILAKU STRUKTUR BAJA TIPE MRF DENGAN BEBAN LATERAL BERDASARKAN SNI 1726-2012 DAN METODE PERFORMANCE BASED PLASTIC DESIGN (PBPD)

2014 ◽  
Vol 13 (1) ◽  
Author(s):  
Nidiasari Jati Sunaryati Eem Ikhsan
Keyword(s):  
Pushover Analysis ◽  
Time History ◽  
Time History Analysis ◽  
Plastic Design ◽  
History Analysis ◽  
Non Linear ◽  
Static Pushover Analysis

Struktur rangka baja pemikul momen merupakan jenis struktur baja tahan gempa yang populer digunakan. Daktilitas struktur yang tinggi merupakan salah satu keunggulan struktur ini, sehingga mampu menahan deformasi inelastik yang besar. Dalam desain, penggunaan metode desain elastis berupa evaluasi non-linear static (Pushover analysis) maupun evaluasi non-linear analisis (Time History Analysis) masih digunakan sebagai dasar perencanaan meskipun perilaku struktur sebenarnya saat kondisi inelastik tidak dapat digambarkan dengan baik. Metode Performance-Based Plastic Design (PBPD) berkembang untuk melihat perilaku struktur sebenarnya dengan cara menetapkan terlebih dahulu simpangan dan mekanisme leleh struktur sehingga gaya geser dasar yang digunakan adalah sama dengan usaha yang dibutuhkan untuk mendorong struktur hingga tercapai simpangan yang telah direncanakan. Studi dilakukan terhadap struktur baja 5 lantai yang diberi beban gempa berdasarkan SNI 1726, 2012 dan berdasarkan metode PBPD. Hasil analisa menunjukkan bahwa struktur yang diberi gaya gempa berdasarkan metode PBPD mencapai simpangan maksimum sesuai simpangan rencana dan kinerja struktur yang dihasilkan lebih baik .

Comparison of steel frames with RWS and WFP beam-to-column connections through seismic fragility analysis

2020 ◽  
pp. 136943322097728
Author(s):  
Haoran Yu ◽  
Weibin Li
Keyword(s):  
Limit State ◽  
Pushover Analysis ◽  
Steel Frames ◽  
Fragility Analysis ◽  
Structural Safety ◽  
Seismic Fragility ◽  
Fe Modelling ◽  
Collapse Resistance ◽  
Seismic Collapse ◽  
Probabilistic Seismic Demand

Reduced web section (RWS) connections and welded flange plate (WFP) connections can both effectively improve the seismic performance of a structure by moving plastic hinges to a predetermined location away from the column face. In this paper, two kinds of steel frames—with RWS connections and WFP connections—as well as different frames with welded unreinforced flange connections were studied through seismic fragility analysis. The numerical simulation was conducted by using multiscale FE modelling. Based on the incremental dynamic analysis and pushover analysis methods, probabilistic seismic demand analysis and seismic capability analysis were carried out, respectively. Finally, combined with the above analysis results, probabilistic seismic fragility analysis was conducted on the frame models. The results showed that the RWS connection and WFP connection (without double plates) have little influence on reducing the maximum inter-storey drift ratio under earthquake action. RWS connections slightly reduce the seismic capability in non-collapse stages and improve the seismic collapse resistance of a structure, which exhibits good structural ductility. WFP connections can comprehensively improve the seismic capability of a structure, but the seismic collapse resistance is worse than that of RWS connections when the structure has a large number of storeys. The frame with WFP connections has a lower failure probability at every seismic limit state, while the frame with RWS connections sacrifices some of its structural safety in non-collapse stages to reduce the collapse probability.

Analysis of Seismic Performance of RC Frames with Centrally Reinforced Columns

2013 ◽  
Vol 671-674 ◽  
pp. 1319-1323
Author(s):  
Zi Xue Lei ◽  
Yu Hang Han ◽  
San Sheng Dong ◽  
Jun Qing Guo
Keyword(s):  
Seismic Performance ◽  
Cross Sections ◽  
Carrying Capacity ◽  
Pushover Analysis ◽  
Seismic Load ◽  
Load Carrying Capacity ◽  
Rc Columns ◽  
Rc Column ◽  
Rc Frames ◽  
Load Carrying

A centrally reinforced column is a new type of RC columns, formed by providing a reinforcement skeleton at the central part of the cross section of an ordinary RC column. Tests have shown that as compared with an ordinary RC column, this type of columns has a higher load carrying capacity and ductility. From the pushover analysis of a frame composed of ordinary RC columns and one consisting of centrally reinforced columns, their seismic performance under seismic load of 9-degree intensity was studied according to Chinese code, including target displacements, story-level displacements, interstory drifts, appearance and development of plastic hinges. The results indicate that although the dimensions of cross sections of columns in the frame with centrally reinforced columns are smaller than those of the ordinary frame, the former still has a higher overall load carrying capacity and seismic performance than the latter.

scholarly journals Seismic performance of a high-rise residential building model in Purwokerto, Indonesia

2018 ◽  
Vol 192 ◽  
pp. 02002 ◽  
Author(s):  
Yanuar Haryanto ◽  
Buntara Sthenly Gan ◽  
Nanang Gunawan Wariyatno ◽  
Eva Wahyu Indriyati
Keyword(s):  
Dynamic Response ◽  
Static Analysis ◽  
Pushover Analysis ◽  
Residential Building ◽  
Response Analysis ◽  
Dynamic Response Analysis ◽  
Building Model ◽  
High Rise ◽  
Drift Ratio ◽  
Linear Static Analysis

We evaluated the performance of a high-rise residential building model in Purwokerto, Indonesia due to the seismic load. The evaluation was performed based on seismic loads given in the 2002 and 2012 Indonesian National Standard (SNI) using linear static analysis, dynamic response analysis and pushover analysis. Based on the linear static analysis, the drift ratio decreased by an average of 34.42 and 32.61% for the X and Y directions respectively. Meanwhile, based on the dynamic response analysis, the drift ratio also decreased by an average of 30.74 and 27.33% for the X and Y directions respectively. In addition, the pushover analysis indicates that the performance of this high-rise residential building model is still at Immediate Occupancy (IO) level. The post-earthquake damage state in which the building remains safe to occupy, essentially retaining the pre-earthquake design strength and stiffness of the structure. The risk of life-threatening injury as a result of structural damage is very low. Although some minor structural repairs may be appropriate, these would generally not be required prior to re-occupancy.

Sign in / Sign up

Export Citation Format

Share Document