Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-Leaching Process

2017 ◽  
pp. 299-307
Author(s):  
Xudong Liu ◽  
Ganghua Fu ◽  
Yufeng Guo ◽  
Tao Jiang ◽  
Wei Chen ◽  
...  
Keyword(s):  
Sodium Salt ◽  
Leaching Process ◽  
Ammonia Leaching

Experimental Study on Zinc Leaching of Blast Furnace Gas Ash by Ammonia Leaching

2014 ◽  
Vol 962-965 ◽  
pp. 780-783
Author(s):  
Jie Wang ◽  
Wei Xiong ◽  
Bao Ping Zhang
Keyword(s):  
Blast Furnace ◽  
Removal Rate ◽  
Influence Factors ◽  
Environmental Benefits ◽  
Main Task ◽  
Leaching Rate ◽  
Iron And Steel ◽  
Leaching Process ◽  
Blast Furnace Gas ◽  
Ammonia Leaching

Blast furnace gas ash is one of the main solid wastes in iron and steel enterprise. The recovery of zinc from gas ash can result in considerable economic and environmental benefits. The effect of NH3/NH4+, L/S, [NH3]T and leaching time on the zinc leaching rate of blast furnace gas ash by using ammonia leaching process had been investigated in this paper. The results show that L/S and NH3/NH4+ are the main influence factors under the experimental condition. The optimal conditions for leaching process are: NH3/NH4+=2:1, L/S=4:1, [NH3]T =5mol/L, and the leaching time is 3 hours. The zinc leaching rate is 82.84% under the optimized conditions. The lead content in leaching solution is high, so the main task is to improve the removal rate of lead in the purification process.

scholarly journals Recovering Scandium from Scandium Rough Concentrate Using Roasting-Hydrolysis-Leaching Process

Processes ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 365 ◽  
Author(s):  
Junhui Xiao ◽  
Yang Peng ◽  
Wei Ding ◽  
Tao Chen ◽  
Kai Zou ◽  
...  
Keyword(s):  
Sodium Salt ◽  
Fusion Reaction ◽  
Acid Leaching ◽  
Leach Residue ◽  
Test Results ◽  
Leaching Process ◽  
Panxi Area ◽  
Roasting Furnace ◽  
Hydrolysis Residue ◽  
Peak Value

In this study, a roasting-hydrolysis-acid leaching process is used to extract scandium from the scandium rough concentrate. The scandium rough concentrate containing Sc2O3 of 76.98 g/t was obtained by magnetic separation, gravity separation, and electric separation from Sc-bearing Vi-Ti magnetite tailings in the Panxi area of China. The majority of scandium in scandium rough concentrate mainly occurs in diopside, titanopyroxene, montmorillonite, chlorite, talc, aluminosilicate minerals, and isomorphism. Sodium salt and scandium coarse concentrate are added into the roasting furnace for roasting, which makes the fusion reaction of silicon, aluminum and sodium salt to produce soluble salts such as sodium silicate and sodium metaaluminate. Scandium is further recovered from the hydrolysis residue by acid leaching. Test results show scandium leaching recovery of 95.12% and the acid leaching residue with Sc2O3 content of 8.12 g/t are obtained, while the extraction of scandium is obvious. There is no obvious peak value of Scandium spectrum in hydrochloric acid leach residue. Most of scandium in hydrolytic residue is dissolved into Sc3+ and enters into the liquid phase. The main minerals in leach residue are perovskite, ferric silicate, and olivine.

Soft ionic liquid based resistive memory characteristics in a two terminal discrete polydimethylsiloxane cylindrical microchannel

2020 ◽  
Vol 8 (38) ◽  
pp. 13368-13374
Author(s):  
Muhammad Umair Khan ◽  
Gul Hassan ◽  
Jinho Bae
Keyword(s):  
Ionic Liquid ◽  
Acrylic Acid ◽  
Sodium Hydroxide ◽  
Sodium Salt ◽  
Resistive Memory ◽  
Cylindrical Microchannel ◽  
Memory Characteristics ◽  
Poly Acrylic Acid

This paper proposes a novel soft ionic liquid (IL) electrically functional device that displays resistive memory characteristics using poly(acrylic acid) partial sodium salt (PAA-Na+:H2O) solution gel and sodium hydroxide (NaOH) in a thin polydimethylsiloxane (PDMS) cylindrical microchannel.

Plant mortality and seedling recruitment responses to flupropanate in grassland populations of Nassella trichotoma

2017 ◽  
Vol 70 ◽  
pp. 160-164 ◽  
Author(s):  
G.W. Bourdôt ◽  
S. Jackman ◽  
D.J. Saville
Keyword(s):  
New Zealand ◽  
Dose Response ◽  
Sodium Salt ◽  
Seedling Recruitment ◽  
Residual Activity ◽  
Application Rate ◽  
Plant Mortality ◽  
Complete Control ◽  
Bio Synthesis

Flupropanate (sodium 2,2,3,3 tetrafluoropropanate), a slow-acting lipid bio- synthesis-inhibiting herbicide, was recently registered in New Zealand as Taskforce (745 g/L flupropanate as the sodium salt) for the selective and long-term control of Nassella trichotoma (nassella tussock) in pastures. In five dose-response experiments in permanent hill pastures in Canterbury, conducted between 2012 and 2016, we measured the efficacy of the herbicide against established plants of N. trichotoma and its residual activity against recruiting seedlings. Mortality, as an average across the five sites, was 93% 1.5 years after applying 1.49 kg flupropanate/ha (the label-recommended rate), and 100% at 2.98 kg/ha. This indicates that an application rate higher than the label rate will be necessary for complete control of a N. trichotoma infestation. The presence of 1,000 and 6,250 visible seedlings of N. trichotoma/ha in the autumn 3.2 and 2.1 years after applying 1.49 kg flupropanate/ha (at a Greta Valley and Scargill site respectively) indicates that the herbicide’s soil residues had decayed within 12 months to a concentration lower than necessary to kill the germinating seedlings of N. trichotoma.

Sign in / Sign up

Export Citation Format

Share Document