Voice Guidance Design Guideline for Home Appliances from Viewpoints of Design Consistency

2017 ◽  
pp. 371-383
Author(s):  
Sawaya Harigaya ◽  
Miwa Nakanishi
Keyword(s):  
Design Guideline ◽  
Home Appliances ◽  
Design Consistency

Home Automation Using Bluetooth

2020 ◽  
pp. 675-678
Author(s):  
Mukesh Mahajan ◽  
Astha Dubey ◽  
Samruddhi Desai ◽  
Kaveri Netawate
Keyword(s):  
Temperature Sensor ◽  
Humidity Sensor ◽  
The Other ◽  
Automation System ◽  
Home Automation ◽  
Wireless Devices ◽  
Home Appliances ◽  
Home Automation System ◽  
Condition Systems

This paper reviews basically about Bluetooth based home automation system. It is controlled by PIC microcontroller. Home automation can be defined as the ability to perform tasks automatically and monitor or change status remotely. These include tasks such as turning off lights in the room, locking doors via smartphone, automate air condition systems and appliances which help in the kitchen. Now a days several wireless devices are available such as Bluetooth, Zigbee and GSM. Since Bluetooth is low in cost than the other two and hence is used more. In this paper we have described the methods of automating different home appliances using Bluetooth and pic microcontroller. Different sensors are involved in this system to advance and make it smarter. Sensors such as temperature sensor, liquid sensors, humidity sensor etc. can be used.

Consumer Statisfaction with Rubber and Home Appliances

2011 ◽  
Vol 3 (2) ◽  
pp. 44-45
Author(s):  
A. Joseph Succour Jolly ◽  
Keyword(s):  
Home Appliances

CONTROLING AND MONITORING HOME APPLIANCES THROUGH CLOUD USING IoT

2018 ◽  
Vol 74 (2) ◽  
Author(s):  
Saranya Vanama ◽  
PACHIPALA YELLAMMA ◽  
A RAMYA ◽  
G.V KALYANI ◽  
CHALLA NARASIMHAM
Keyword(s):  
Home Appliances

Muscles

2018 ◽  
Author(s):  
Iain A. Anderson ◽  
Benjamin M. O’Brien
Keyword(s):  
Sensory Feedback ◽  
Artificial Muscles ◽  
Combustion Engines ◽  
Electric Motors ◽  
Home Appliances ◽  
Leg Muscles ◽  
Mechanical Devices ◽  
Control Surfaces

Mechanical devices that include home appliances, automobiles, and airplanes are typically driven by electric motors or combustion engines through gearboxes and other linkages. Airplane wings, for example, have hinged control surfaces such as ailerons. Now imagine a wing that has no hinged control surfaces or linkages but that instead bends or warps to assume an appropriate shape, like the wing of a bird. Such a device could be enabled using an electro-active polymer technology based on electronic artificial muscles. Artificial muscles act directly on a structure, like our leg muscles that are attached by tendon to our bones and that through phased contraction enable us to walk. Sensory feedback from our muscles enables proprioceptive control. So, for artificial muscles to be used appropriately we need to pay attention not only to mechanisms for muscle actuation but also to how we can incorporate self-sensing feedback for the control of position.

New German design guideline for single stage activated sludge plants

2000 ◽  
Vol 41 (9) ◽  
pp. 139-145
Author(s):  
R. Kayser
Keyword(s):  
Activated Sludge ◽  
Phosphorus Removal ◽  
Design Procedure ◽  
Single Stage ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Design Guideline

The German design guideline A 131 “Design of single stage activated sludge plants” was amended in 1999. The main changes of the guideline from 1991 are outlined. The design procedure for plants with nitrogen and phosphorus removal is presented.

scholarly journals Interfacial Strengthening of Graphene/Aluminum Composites through Point Defects: A First-Principles Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 738
Author(s):  
Xin Zhang ◽  
Shaoqing Wang
Keyword(s):  
Mechanical Properties ◽  
Metal Matrix Composites ◽  
Point Defects ◽  
Metal Matrix ◽  
Interfacial Bonding ◽  
Theoretical Research ◽  
Matrix Composites ◽  
Aluminum Composites ◽  
Single Vacancy ◽  
Design Guideline

The relationship between point defects and mechanical properties has not been fully understood yet from a theoretical perspective. This study systematically investigated how the Stone–Wales (SW) defect, the single vacancy (SV), and the double vacancy (DV) affect the mechanical properties of graphene/aluminum composites. The interfacial bonding energies containing the SW and DV defects were about twice that of the pristine graphene. Surprisingly, the interfacial bonding energy of the composites with single vacancy was almost four times that of without defect in graphene. These results indicate that point defects enhance the interfacial bonding strength significantly and thus improve the mechanical properties of graphene/aluminum composites, especially the SV defect. The differential charge density elucidates that the formation of strong Al–C covalent bonds at the defects is the most fundamental reason for improving the mechanical properties of graphene/aluminum composites. The theoretical research results show the defective graphene as the reinforcing phase is more promising to be used in the metal matrix composites, which will provide a novel design guideline for graphene reinforced metal matrix composites. Furthermore, the sp3-hybridized C dangling bonds increase the chemical activity of the SV graphene, making it possible for the SV graphene/aluminum composites to be used in the catalysis field.

Sign in / Sign up

Export Citation Format

Share Document