Bridge Foundations Supported by EPS Geofoam Embankments on Soft Soil

2018 ◽  
pp. 281-294 ◽  
Author(s):  
Jan Vaslestad ◽  
Steven Floyd Bartlett ◽  
R. Aabøe ◽  
H. Burkart ◽  
T. Ahmed ◽  
...  
Keyword(s):  
Soft Soil ◽  
Bridge Foundations ◽  
Eps Geofoam

Analysis of Raft Foundation with EPS Geofoam for Earthquake Resistant

2014 ◽  
Vol 695 ◽  
pp. 613-616
Author(s):  
Mohd Faiz Mohammad Zaki ◽  
Mohammad Fadzli Ramli ◽  
Afizah Ayob ◽  
Mohd Taftazani Ahmad
Keyword(s):  
Structural Engineering ◽  
Soft Soil ◽  
Simulation Models ◽  
Soil Mass ◽  
Dynamic Force ◽  
Finite Element Program ◽  
Eps Geofoam ◽  
Raft Foundation ◽  
Element Program ◽  
Innovative Material

It is becoming a great challenge for civil engineers to design a foundation which able to minimize the effect of an earthquake. A major earthquake produces a strong ground motion in the subsoil and surface structures supported on the soil mass will be induced to move and absorb the dynamic forces. Seismic retrofit of existing foundations is an alternative. However, the modification of this existing foundation toward earthquake resistances raises issues which are far from being totally resolved. Innovative material such as EPS is widely accepted in structural engineering due to its characteristic to absorb the dynamic force effectively. This EPS material demonstrated the practicality and has been applied for geotechnical engineering for various reasons. Based on this, a research which is related to the application of EPS in mitigating the earthquake forces, particularly for raft foundations was conducted properly in this research. The various types and thickness of EPS located beneath the raft foundation and over the soft soil are studied. A finite element program is utilized to develop the computer simulation models. Based on the results, Expended Polystyrene (EPS) Geofoam, placed beneath the raft foundation is able to produces the minimum settlements when subjected to earthquake loading rather than raft foundation modeled without EPS and increasing the density of EPS will simultaneously decrease the settlement of a foundation.

Application of geotextiles in strengthening soft soil foundation

2019 ◽  
Vol 1 (1) ◽  
pp. 18-22
Author(s):  
Yang Xueqing ◽  
Zhong Xiang
Keyword(s):  
Soft Soil ◽  
Soil Foundation ◽  
Soft Soil Foundation

scholarly journals Strength Performance and Microstructure of Calcium Sulfoaluminate Cement-Stabilized Soft Soil

2021 ◽  
Vol 13 (4) ◽  
pp. 2295
Author(s):  
Hailong Liu ◽  
Jiuye Zhao ◽  
Yu Wang ◽  
Nangai Yi ◽  
Chunyi Cui
Keyword(s):  
Soft Soil ◽  
Hydration Product ◽  
X Ray Diffraction ◽  
Calcium Sulfoaluminate Cement ◽  
Strength Performance ◽  
X Ray ◽  
Calcium Sulfoaluminate ◽  
Stabilized Soil ◽  
Calcium Silicates ◽  
Hydrated Calcium

Calcium sulfoaluminate cement (CSA) was used to stabilize a type of marine soft soil in Dalian China. Unconfined compressive strength (UCS) of CSA-stabilized soil was tested and compared to ordinary Portland cement (OPC); meanwhile the influence of amounts of gypsum in CSA and cement contents in stabilized soils on the strength of stabilized soils were investigated. X-ray diffraction (XRD) tests were employed to detect generated hydration products, and scanning electron microscopy (SEM) was conducted to analyze microstructures of CSA-stabilized soils. The results showed that UCS of CSA-stabilized soils at 1, 3, and 28 d firstly increased and then decreased with contents of gypsum increasing from 0 to 40 wt.%, and CSA-stabilized soils exhibited the highest UCS when the content of gypsum equaled 25 wt.%. When the mixing amounts of OPC and CSA were the same, CSA-stabilized soils had a significantly higher early strength (1 and 3 d) than OPC. For CSA-stabilized soil with 0 wt.% gypsum, monosulfate (AFm) was detected as a major hydration product. As for CSA-stabilized soil with certain amounts of gypsum, the intensity of ettringite (Aft) was significantly higher than that in the sample hydrating without gypsum, but a tiny peak of AFm also could be detected in the sample with 15 wt.% gypsum at 28 d. Additionally, the intensity of AFt increased with the contents of gypsum increasing from 0 to 25 wt.%. When contents of gypsum increased from 25 to 40 wt.%, the intensity of AFt tended to decrease slightly, and residual gypsum could be detected in the sample with 40 wt.% gypsum at 28 d. In the microstructure of OPC-stabilized soils, hexagonal plate-shaped calcium hydroxide (CH) constituted skeleton structures, and clusters of hydrated calcium silicates (C-S-H) gel adhered to particles of soils. In the microstructure of CSA-stabilized soils, AFt constituted skeleton structures, and the crystalline sizes of ettringite increased with contents of gypsum increasing; meanwhile, clusters of the aluminum hydroxide (AH3) phase could be observed to adhere to particles of soils and strengthen the interaction.

scholarly journals Checking the site categorization criteria and amplification factors of the 2021 draft of Eurocode 8 Part 1–1

2021 ◽  
Author(s):  
Roberto Paolucci ◽  
Mauro Aimar ◽  
Andrea Ciancimino ◽  
Marco Dotti ◽  
Sebastiano Foti ◽  
...  
Keyword(s):  
Numerical Simulations ◽  
Shear Wave ◽  
Ground Motion ◽  
Shear Wave Velocity ◽  
Soft Soil ◽  
Site Amplification ◽  
Soil Conditions ◽  
Eurocode 8 ◽  
Site Specific ◽  
Amplification Factors

AbstractIn this paper the site categorization criteria and the corresponding site amplification factors proposed in the 2021 draft of Part 1 of Eurocode 8 (2021-draft, CEN/TC250/SC8 Working Draft N1017) are first introduced and compared with the current version of Eurocode 8, as well as with site amplification factors from recent empirical ground motion prediction equations. Afterwards, these values are checked by two approaches. First, a wide dataset of strong motion records is built, where recording stations are classified according to 2021-draft, and the spectral amplifications are empirically estimated computing the site-to-site residuals from regional and global ground motion models for reference rock conditions. Second, a comprehensive parametric numerical study of one-dimensional (1D) site amplification is carried out, based on randomly generated shear-wave velocity profiles, classified according to the new criteria. A reasonably good agreement is found by both approaches. The most relevant discrepancies occur for the shallow soft soil conditions (soil category E) that, owing to the complex interaction of shear wave velocity, soil deposit thickness and frequency range of the excitation, show the largest scatter both in terms of records and of 1D numerical simulations. Furthermore, 1D numerical simulations for soft soil conditions tend to provide lower site amplification factors than 2021-draft, as well as lower than the corresponding site-to-site residuals from records, because of higher impact of non-linear (NL) site effects in the simulations. A site-specific study on NL effects at three KiK-net stations with a significantly large amount of high-intensity recorded ground motions gives support to the 2021-draft NL reduction factors, although the very limited number of recording stations allowing such analysis prevents deriving more general implications. In the presence of such controversial arguments, it is reasonable that a standard should adopt a prudent solution, with a limited reduction of the site amplification factors to account for NL soil response, while leaving the possibility to carry out site-specific estimations of such factors when sufficient information is available to model the ground strain dependency of local soil properties.

Evaluation of floor acceleration demands from the 2017 Mexico City code seismic provisions using a continuous elastic model and records of instrumented buildings

2020 ◽  
Vol 36 (2_suppl) ◽  
pp. 213-237
Author(s):  
Miguel A Jaimes ◽  
Adrián D García-Soto
Keyword(s):  
Mexico City ◽  
Seismic Design ◽  
Soft Soil ◽  
Response Spectra ◽  
Elastic Model ◽  
Ground Acceleration ◽  
Nonstructural Components ◽  
Floor Response Spectra ◽  
Instrumented Buildings ◽  
Floor Acceleration

This study presents an evaluation of floor acceleration demands for the design of rigid and flexible acceleration-sensitive nonstructural components in buildings, calculated using the most recent Mexico City seismic design provisions, released in 2017. This evaluation includes two approaches: (1) a simplified continuous elastic model and (2) using recordings from 10 instrumented buildings located in Mexico City. The study found that peak floor elastic acceleration demands imposed on rigid nonstructural components into buildings situated in Mexico City might reach values of 4.8 and 6.4 times the peak ground acceleration at rock and soft sites, respectively. The peak elastic acceleration demands imposed on flexible nonstructural components in all floors, estimated using floor response spectra, might be four times larger than the maximum acceleration of the floor at the point of support of the component for buildings located in rock and soft soil. Comparison of results from the two approaches with the current seismic design provisions revealed that the peak acceleration demands and floor response spectra computed with the current 2017 Mexico City seismic design provisions are, in general, adequate.

The Novel Usage of EPS Geofoam as Column Material: A Laboratory Study

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Saeid Bazzazian Bonab ◽  
Seyed Hamid Lajevardi ◽  
Hamid Reza Saba ◽  
Seyed Mohammad Mirhosseini
Keyword(s):  
Laboratory Study ◽  
The Novel ◽  
Eps Geofoam ◽  
Column Material

scholarly journals Quantitative Evaluation of Ground Movements Caused by Grouting during Shield Tunnelling in Clay

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Zhi-Feng Wang ◽  
Wen-Chieh Cheng ◽  
Ya-Qiong Wang
Keyword(s):  
Cylindrical Cavity ◽  
Radial Stress ◽  
Soft Soil ◽  
Tunnel Construction ◽  
Reliable Measure ◽  
Simple Method ◽  
Ground Movements ◽  
Tunnel Boring ◽  
Shield Tunnelling ◽  
London Clay

Grouting has been deemed as one of the most effective measures for mitigation of ground movements during tunnel construction in soft soil. Notwithstanding that, a reliable measure to quantitatively evaluate the grouting-induced ground movements during shield tunnelling in soft soil has not yet been developed. This paper presents a simple method capable of quantitatively estimating the ground movements associated with grouting for tunnel-boring operations where the grouting parameters and soil properties are taken into consideration. The grouting process is simplified as the expansion of a cylindrical cavity with a uniform radial stress applied at soil-grout interface in a half plane, and the analytical solution proposed by Verruijt is introduced for determining the ground movements by the expansion of the cylindrical cavity. The proposed method is verified with a case history undertaken in London Clay. The results obtained suggest that this procedure would be helpful in managing the grouting parameters adopted in upcoming soft ground tunnelling project and mitigating the environmental impacts on nearby properties.

Sign in / Sign up

Export Citation Format

Share Document