OpenMI – Real Progress Towards Integrated Modelling

2008 ◽  
pp. 449-464 ◽  
Author(s):  
D. Fortune ◽  
P. Gijsbers ◽  
J. Gregersen ◽  
R Moore
Keyword(s):  
Integrated Modelling ◽  
Real Progress

Clinical Science in the 1990s

1990 ◽  
Vol 78 (1) ◽  
pp. 1-1
Author(s):  
M. J. Brown
Keyword(s):  
Medical Research ◽  
Review Process ◽  
Molecular Level ◽  
Short Interval ◽  
Clinical Science ◽  
Molecular Medicine ◽  
Mutual Benefit ◽  
Real Progress ◽  
General Journal

From this issue, Clinical Science will increase its page numbers from an average of 112 to 128 per monthly issue. This welcome change — equivalent to at least two manuscripts — has been ‘forced’ on us by the increasing pressure on space; this has led to an undesirable increase in the delay between acceptance and publication, and to a fall in the proportion of submitted manuscripts we have been able to accept. The change in page numbers will instead permit us now to return to our exceptionally short interval between acceptance and publication of 3–4 months; and at the same time we shall be able not only to accept (as now) those papers requiring little or no revision, but also to offer hope to some of those papers which have raised our interest but come to grief in review because of a major but remediable problem. Our view, doubtless unoriginal, has been that the review process, which is unusually thorough for Clinical Science, involving a specialist editor and two external referees, is most constructive when it helps the evolution of a good paper from an interesting piece of research. Traditionally, the papers in Clinical Science have represented some areas of research more than others. However, this has reflected entirely the pattern of papers submitted to us, rather than any selective interest of the Editorial Board, which numbers up to 35 scientists covering most areas of medical research. Arguably, after the explosion during the last decade of specialist journals, the general journal can look forward to a renaissance in the 1990s, as scientists in apparently different specialities discover that they are interested in the same substances, asking similar questions and developing techniques of mutual benefit to answer these questions. This situation arises from the trend, even among clinical scientists, to recognize the power of research based at the cellular and molecular level to achieve real progress, and at this level the concept of organ-based specialism breaks down. It is perhaps ironic that this journal, for a short while at the end of the 1970s, adopted — and then discarded — the name of Clinical Science and Molecular Medicine, since this title perfectly represents the direction in which clinical science, and therefore Clinical Science, is now progressing.

Optimisation and control of the inflow to a wastewater treatment plant using integrated modelling tools

1998 ◽  
Vol 37 (1) ◽  
pp. 347-354 ◽  
Author(s):  
Ole Mark ◽  
Claes Hernebring ◽  
Peter Magnusson
Keyword(s):  
Wastewater Treatment ◽  
Real Time ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Pilot Project ◽  
Integrated Modelling ◽  
Real Time Control ◽  
Sewer System ◽  
Time Control ◽  
The Impact

The present paper describes the Helsingborg Pilot Project, a part of the Technology Validation Project: “Integrated Wastewater” (TVP) under the EU Innovation Programme. The objective of the Helsingborg Pilot Project is to demonstrate implementation of integrated tools for the simulation of the sewer system and the wastewater treatment plant (WWTP), both in the analyses and the operational phases. The paper deals with the programme for investigating the impact of real time control (RTC) on the performance of the sewer system and wastewater treatment plant. As the project still is in a very early phase, this paper focuses on the modelling of the transport of pollutants and the evaluation of the effect on the sediment deposition pattern from the implementation of real time control in the sewer system.

scholarly journals Integrated modelling of hot forging of low-alloyed steels for an ICME workflow

2019 ◽  
Vol 1 (11) ◽  
Author(s):  
Danish Khan ◽  
Pramod Zagade ◽  
B. P. Gautham
Keyword(s):  
Hot Forging ◽  
Integrated Modelling

scholarly journals Integrated modelling of the ecosystem of the Niger river inland delta in Mali

2003 ◽  
Vol 164 (1) ◽  
pp. 83-102 ◽  
Author(s):  
M Kuper ◽  
C Mullon ◽  
Y Poncet ◽  
E Benga
Keyword(s):  
Integrated Modelling ◽  
Niger River

Progress outside of paradise: Old and new comparative approaches to contentious politics

2021 ◽  
pp. 001041402110242
Author(s):  
Sidney Tarrow
Keyword(s):  
Comparative Politics ◽  
Contentious Politics ◽  
Ethnographic Methods ◽  
Ethnographic Studies ◽  
Real Progress ◽  
New Generation ◽  
Dramatic Growth

Descriptive or ethnographic studies were once the stock-in-trade of the comparative politics of non-Western areas and illiberal states. The last few decades have seen a dramatic growth in quantitative—or at least systematic—studies of these systems. This marks real progress, but, in the process, some of the advantages of ethnographic and “unit-contextual” studies have been lost. The contributors to this symposium have used ethnographic methods—often in combination with other methods—to examine and compare episodes of contentious politics in a number of these countries. Drawing on some of the “classics” of comparative politics, this article emphasizes both the continuities and the departures of the new generation of “ethnography plus” research efforts represented in this symposium.

Integrated modelling: comparison of state variables, processes and parameters in sewer and wastewater treatment plant models

1997 ◽  
Vol 36 (5) ◽  
pp. 373-380 ◽  
Author(s):  
C. Fronteau ◽  
W. Bauwens ◽  
P.A. Vanrolleghem
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Drainage System ◽  
Integrated Modelling ◽  
Urban Drainage ◽  
State Variables ◽  
Sewer System ◽  
Wastewater Treatment Process ◽  
Urban Drainage System

All the parts of an urban drainage system, i.e. the sewer system, the wastewater treatment plant (WWTP) and the river, should be integrated into one single model to assess the performance of the overall system and for the development of design and control strategies assisting in its sustainable and cost effective management. Existing models for the individual components of the system have to be merged in order to develop the integrated tool. One of the problems arising from this methodology is the incompatibility of state variables, processes and parameters used in the different modelling approaches. Optimisation of an urban drainage system, and of the wastewater treatment process in particular, requires a good knowledge of the wastewater composition. As important transformations take place between the emission from the household and the arrival at the treatment facility, sewer models should include these transformations in the sewer system. At present, however, research is still needed in order to increase our knowledge of these in-sewer processes. A comparison of the state variables, processes and parameters has been carried out in both sewer models (SMs) and activated sludge models (ASMs). An ASM approach is used for the description of reactions in sewer models. However, a difference is found in the expression for organic material (expressed in terms of BOD) and heterotrophic biomass is absent as a state variable, resulting in differences in processes and parameters. Reconciliation of both the models seems worthwhile and a preliminary solution is suggested in this paper.

Sign in / Sign up

Export Citation Format

Share Document