A PCA-Based Automated Method for Determination of Human Body Orientation

Author(s):  
Weihe Wu ◽  
Aimin Hao ◽  
Wentao Wang ◽  
Yiqiang Wang
2018 ◽  
Vol 69 (4) ◽  
pp. 875-880
Author(s):  
Oana Roxana Chivu ◽  
Ovidiu Mederle ◽  
Augustin Semenescu ◽  
Ileana Mates ◽  
Claudiu Babis ◽  
...  

The paper describes how to determine the noise in a production hall where there are production machines and equipment. The chosen plant is a production unit where filling of the polyurethane foam tubes is performed. The main activity is the production of professional insulators and wholesale of other products from the same range enumerating the following: wholesale chemical products; production of professional insulators; trade in chemicals and chemical industry. The recommended maximum admissible value for a normal 8h work program is 85 dB (A). The objective is to determine the level of noise in the factory and how it acts as a physical professional risk factor and its effects on the human body. The way in which the proposed objective was achieved was to determine the value of the noise level with the specialized equipment. Following the determinations that will be presented in the following chapters, appropriate protective measures have been taken.


2020 ◽  
Vol 16 ◽  
Author(s):  
Ramazan Akçan ◽  
Halit Canberk Aydogan ◽  
Mahmut Şerif Yıldırım ◽  
Burak Taştekin ◽  
Necdet Sağlam

Background/aim: Use of nanomaterials in the healthcare applications increases in parallel to technological developments. It is frequently utilized in diagnostic procedures, medications and in therapeutic implementations. Nanomaterials take place among key components of medical implants, which might be responsible for certain toxic effects on human health at nano-level. In this review, nanotoxicological effects, toxicity determination of nanobiomaterials used in human body and their effects on human health are discussed. Material and Method: A detailed review of related literature was performed and evaluated as per nanomaterials and medical implants. Results and Conclusion: The nanotoxic effects of the materials applied to human body and the determination of its toxicity are important. Determination of toxicity for each nanomaterial requires a detailed and multifactorial assessment considering the properties of these materials. There are limited studies in the literature regarding the toxic effects of nanomaterials used in medical implants. Although these implants are potentially biocompatible and biodegradable, it is highly important to discuss nanotoxicological characteristics of medical implant.


1967 ◽  
Vol 13 (6) ◽  
pp. 515-520 ◽  
Author(s):  
Genevieve Farese ◽  
Janice L Schmidt ◽  
Milton Mager

Abstract A completely automated analysis is described for the determination of serum calcium with glyoxal bis (2-hydroxyanil) solution (GBHA). The method is simple and precise, and the data obtained are in good agreement with results obtained by the manual GBHA procedure.


1965 ◽  
Vol 6 (2) ◽  
pp. 301-306
Author(s):  
Arnold Antonis ◽  
D.S. Platt ◽  
J.M. Thorp

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1157
Author(s):  
Francesco Nacca ◽  
Concetta Cozzolino ◽  
Petronia Carillo ◽  
Pasqualina Woodrow ◽  
Amodio Fuggi ◽  
...  

The high content of glucosinolates and glutathione makes the Brassicaceae an important healthy food. Thiols and especially glutathione and γ-Glu-Cys-Gly tripeptide are involved in many fundamental cellular functions such as oxidative stress protection. Although several methods for sulphur compounds analysis in biological samples are actually used, the determination of glutathione and other sulphur derivatives in plant tissues is rather problematic due to their extreme susceptibility to oxidation, which can lead to their overestimation. The aim of this work was the improvement and validation of an automated method for determination of reduced and oxidised glutathione, cysteine and γ-glutamylcysteine in plant tissues. The method consists of a fully automated pre-column derivatization of thiols based on monobromobimane reagent, a high-performance liquid chromatography derivatives separation, and a fluorimetric detection and quantification. The method was successfully applied for determination of the oxidized and reduced forms of Cys, γ-GC and GSH content in leaves, petioles, inflorescences and roots of Brassica rapa L. subsp. Sylvestris. At harvest, in freshly cut plants, the average contents of GSH/2GSSG were 840/45, 345/70 and 150/70 nmol g−1 FW for the florets, leaf blades and stems, respectively; those of Cys/2Cys were 80/12, 29/12 and 24/6 nmol g-1 FW; while those of γ-GC/γ-GCCG-γ were 8.0/4.0, and 6.0/3.0, 3.0/2.0 nmol g−1 FW, respectively. Such amounts were lower in low-sulphur-grown plants at harvest. The very low coefficient of variation between repeated tests (maximum 1.6%), the high recovery of internal standard (>96%) and the linear correlation coefficient of the calibration (R2 > 0.99) support the efficiency of this method that allowed analysing about 50 samples/die in a totally automated manner with no operator intervention. Our results show that the reported method integrations can significantly improve thiols detection via HPLC.


Author(s):  
David C. Cowell

An automated method is described, using standard continuous flow techniques, for the determination of urine fluoride ion concentration using a fluoride ion selective electrode. It is shown that the kinetics of the electrode response to changes in fluoride ion can be used for the accurate measurement of fluoride ion concentration in urine, and that equilibration of the electrode response is not a prerequisite for the measurement of fluoride ion. Recovery experiments are in the range 83 to 90%; in-batch precision is between 0·9 and 1·6% and carryover 2·5% or less.


1965 ◽  
Vol 12 (3) ◽  
pp. 565-570 ◽  
Author(s):  
David A. Swann ◽  
Endre A. Balazs
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document