On Grid Partitioning for a High-Performance Groundwater Simulation Software

2000 ◽  
pp. 221-234 ◽  
Author(s):  
Erik Elmroth
Keyword(s):  
High Performance ◽  
Simulation Software ◽  
Groundwater Simulation ◽  
Grid Partitioning

scholarly journals Numerical Evaluation of a HVAC System Based on a High-Performance Heat Transfer Fluid

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3298
Author(s):  
Gianpiero Colangelo ◽  
Brenda Raho ◽  
Marco Milanese ◽  
Arturo de Risi
Keyword(s):  
Heat Transfer ◽  
High Performance ◽  
Cooling System ◽  
Electrical Energy ◽  
Simulation Software ◽  
Heat Transfer Fluid ◽  
Hvac System ◽  
Dynamic Simulations ◽  
Heating And Cooling ◽  
The University

Nanofluids have great potential to improve the heat transfer properties of liquids, as demonstrated by recent studies. This paper presents a novel idea of utilizing nanofluid. It analyzes the performance of a HVAC (Heating Ventilation Air Conditioning) system using a high-performance heat transfer fluid (water-glycol nanofluid with nanoparticles of Al2O3), in the university campus of Lecce, Italy. The work describes the dynamic model of the building and its heating and cooling system, realized through the simulation software TRNSYS 17. The use of heat transfer fluid inseminated by nanoparticles in a real HVAC system is an innovative application that is difficult to find in the scientific literature so far. This work focuses on comparing the efficiency of the system working with a traditional water-glycol mixture with the same system that uses Al2O3-nanofluid. The results obtained by means of the dynamic simulations have confirmed what theoretically assumed, indicating the working conditions of the HVAC system that lead to lower operating costs and higher COP and EER, guaranteeing the optimal conditions of thermo-hygrometric comfort inside the building. Finally, the results showed that the use of a nanofluid based on water-glycol mixture and alumina increases the efficiency about 10% and at the same time reduces the electrical energy consumption of the HVAC system.

Based on Numerical Simulation of High-Performance Parallel Machine Muffler Experimental Calibration

2013 ◽  
Vol 718-720 ◽  
pp. 1645-1650
Author(s):  
Gen Yin Cheng ◽  
Sheng Chen Yu ◽  
Zhi Yong Wei ◽  
Shao Jie Chen ◽  
You Cheng
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Boundary Element ◽  
Message Passing ◽  
High Performance ◽  
Message Passing Interface ◽  
Parallel Machine ◽  
Simulation Software ◽  
Experimental Calibration ◽  
The Cost

Commonly used commercial simulation software SYSNOISE and ANSYS is run on a single machine (can not directly run on parallel machine) when use the finite element and boundary element to simulate muffler effect, and it will take more than ten days, sometimes even twenty days to work out an exact solution as the large amount of numerical simulation. Use a high performance parallel machine which was built by 32 commercial computers and transform the finite element and boundary element simulation software into a program that can running under the MPI (message passing interface) parallel environment in order to reduce the cost of numerical simulation. The relevant data worked out from the simulation experiment demonstrate that the result effect of the numerical simulation is well. And the computing speed of the high performance parallel machine is 25 ~ 30 times a microcomputer.

scholarly journals Evaluating the use of straw bales in achieving passive house certification (PHIUS+ 2015) in western Canada

2021 ◽  
Author(s):  
Ashley Lubyk
Keyword(s):  
Carbon Footprint ◽  
High Performance ◽  
Climate Impact ◽  
Simulation Software ◽  
Embodied Energy ◽  
Single Family ◽  
Passive House ◽  
House Design ◽  
Straw Bale ◽  
Wall System

Achieving Passive House certification requires super insulation which can significantly raise the embodied energy and carbon footprint of a project, effectively front-end loading the climate impact, especially where petrochemical foam-based products are used. This research sought to evaluate the use of straw bales - a low embodied energy, carbon sequestering agricultural by-product - to achieve PHIUS+2015 certification. A straw bale wall system was adapted to a single-family detached reference house designed to meet the Passive House standard. The wall system was evaluated for applicability across three Western Canadian cities using WUFI Passive energy simulation software to evaluate compliance; thermal bridging and hygrothermal performance were also evaluated. It was found that the proposed straw bale wall assembly satisfied the PHIUS+ 2015 requirements in all three locations - Saskatoon, Calgary, and Kelowna - with only minor changes required to the reference house design. The annual heating demand and peak heating load, the two targets most sensitive to design changes, were, respectively, 4% and 8.6% below the target in Saskatoon, 63.1% and 21.3% below in Calgary, and 63.1% and 32.6% below in Kelowna. The research also revealed that maintaining a high degree of air tightness is essential for satisfying the requirements. Overall, this research demonstrates that straw bales can be a beneficial component in creating high performance enclosures without exacting a large embodied carbon footprint.

scholarly journals MPMC and MCMD: Free High‐Performance Simulation Software for Atomistic Systems

2019 ◽  
Vol 2 (11) ◽  
pp. 1900113 ◽  
Author(s):  
Douglas M. Franz ◽  
Jonathan L. Belof ◽  
Keith McLaughlin ◽  
Christian R. Cioce ◽  
Brant Tudor ◽  
...  
Keyword(s):  
High Performance ◽  
Simulation Software ◽  
Performance Simulation ◽  
Atomistic Systems

Modelling of an Indirect Solar-Assisted Heat Pump System for a High Performance Residential House

2013 ◽  
Author(s):  
Jenny Chu ◽  
Cynthia A. Cruickshank ◽  
Wilkie Choi ◽  
Stephen J. Harrison
Keyword(s):  
Heat Pump ◽  
High Performance ◽  
Simulation Software ◽  
Hot Water ◽  
Solar Thermal ◽  
Working Fluid ◽  
Space Heating ◽  
Pump System ◽  
Heat Pump System ◽  
Solar Thermal Collectors

Heat pumps are commonly used for residential space-heating and cooling. The combination of solar thermal and heat pump systems as a single solar-assisted heat pump (SAHP) system can significantly reduce residential energy consumption in Canada. As a part of Team Ontario’s efforts to develop a high performance house for the 2013 DOE Solar Decathlon Competition, an integrated mechanical system (IMS) consisting of a SAHP was investigated. The system is designed to provide domestic hot water, space-heating, space-cooling and dehumidification. The system included a cold and a hot thermal storage tank and a heat pump to move energy from the low temperature reservoir, to the hot. The solar thermal collectors supplies heat to the cold storage and operate at a higher efficiency due to the heat pump reducing the temperature of the collector working fluid. The combination of the heat pump and solar thermal collectors allows more heat to be harvested at a lower temperature, and then boosted to a suitable temperature for domestic use via the heat pump. The IMS and the building’s energy loads were modeled using the TRNSYS simulation software. A parametric study was conducted to optimize the control, sizing and configuration of the system. This paper provides an overview of the model and summarizes the results of the study. The simulation results suggested that the investigated system can achieve a free energy ratio of about 0.583 for a high performance house designed for the Ottawa climate.

scholarly journals A comparison of the NFRC and CEN thermal transmittance calculation methods in North America’s eight climate zones.

2021 ◽  
Author(s):  
Peta-Gaye Ebanks
Keyword(s):  
North American ◽  
Comparative Evaluation ◽  
High Performance ◽  
Simulation Software ◽  
Calculation Methods ◽  
Climate Zones ◽  
Standard Methods ◽  
Thermal Transmittance ◽  
U Value ◽  
Performance Frame

Studies have found that the CEN and NFRC methods produce different U-values for the same window. A comparative evaluation of the NFRC and CEN U-value calculation methods was conducted for North American residential high performance window products, as well as several parameters that are most influential in determining the whole window U-value for high performance windows, when utilizing different assumptions and boundary conditions, in North America’s eight climate zones. Using 2-D simulation software, THERM and WINDOW, four North American high performance frame types with double, triple and quad glazing combinations, were simulated and calculated according to the NFRC and CEN standard methods. Overall, the trend showed that for the specific window combinations of this study, the higher the performance of the IGU, the lesser the differences in the whole window U-value of both methods. Several strategies were proposed to support the possibility of the harmonization of both calculation methods.

scholarly journals A comparison of the NFRC and CEN thermal transmittance calculation methods in North America’s eight climate zones.

2021 ◽  
Author(s):  
Peta-Gaye Ebanks
Keyword(s):  
North American ◽  
Comparative Evaluation ◽  
High Performance ◽  
Simulation Software ◽  
Calculation Methods ◽  
Climate Zones ◽  
Standard Methods ◽  
Thermal Transmittance ◽  
U Value ◽  
Performance Frame

Studies have found that the CEN and NFRC methods produce different U-values for the same window. A comparative evaluation of the NFRC and CEN U-value calculation methods was conducted for North American residential high performance window products, as well as several parameters that are most influential in determining the whole window U-value for high performance windows, when utilizing different assumptions and boundary conditions, in North America’s eight climate zones. Using 2-D simulation software, THERM and WINDOW, four North American high performance frame types with double, triple and quad glazing combinations, were simulated and calculated according to the NFRC and CEN standard methods. Overall, the trend showed that for the specific window combinations of this study, the higher the performance of the IGU, the lesser the differences in the whole window U-value of both methods. Several strategies were proposed to support the possibility of the harmonization of both calculation methods.

scholarly journals Understanding the landscape of scientific software used on high-performance computing platforms

2020 ◽  
Vol 34 (4) ◽  
pp. 465-477
Author(s):  
A Grannan ◽  
K Sood ◽  
B Norris ◽  
A Dubey
Keyword(s):  
High Performance Computing ◽  
High Performance ◽  
Scientific Computing ◽  
Scientific Discovery ◽  
Simulation Software ◽  
Scientific Software ◽  
Survey Paper ◽  
Software Productivity ◽  
Computing Platforms ◽  
Performance Computing

Scientific discovery increasingly relies on computation through simulations, analytics, and machine and deep learning. Of these, simulations on high-performance computing (HPC) platforms have been the cornerstone of scientific computing for more than two decades. However, the development of simulation software has, in general, occurred through accretion, with a few exceptions. With an increase in scientific understanding, models have become more complex, rendering an accretion mode untenable to the point where software productivity and sustainability have become active concerns in scientific computing. In this survey paper, we examine a modest set of HPC scientific simulation applications that are already using cutting-edge HPC platforms. Several have been in existence for a decade or more. Our objective in this survey is twofold: first, to understand the landscape of scientific computing on HPC platforms in order to distill the currently scattered knowledge about software practices that have helped both developer and software productivity, and second, to understand the kind of tools and methodologies that need attention for continued productivity.

scholarly journals Fluid-structure interaction analysis of eccentricity and leaflet rigidity on thrombosis biomarkers in bioprosthetic aortic valve replacements

2022 ◽  
Author(s):  
David Oks ◽  
Mariano Vazquez ◽  
Guillaume Houzeaux ◽  
Constantine Butakoff ◽  
Cristobal Samaniego
Keyword(s):  
Aortic Valve ◽  
Computational Model ◽  
High Performance ◽  
Interaction Analysis ◽  
Thrombus Formation ◽  
Fluid Structure Interaction ◽  
Simulation Software ◽  
Fluid Structure ◽  
Structure Interaction

This work introduces the first 2-way fluid-structure interaction (FSI) computational model to study the effect of aortic annulus eccentricity on the performance and thrombogenic risk of cardiac bioprostheses. The model predicts that increasing eccentricities yield lower geometric orifice areas (GOAs) and higher normalized transvalvular pressure gradients (TPGs) for healthy cardiac outputs during systole, agreeing with in vitro experiments. Regions with peak values of residence time and shear rate are observed to grow with eccentricity in the sinus of Valsalva, indicating an elevated risk of thrombus formation for eccentric configurations. In addition, the computational model is used to analyze the effect of varying leaflet rigidity on both performance, thrombogenic and calcification risks with applications to tissue-engineered prostheses, observing an increase in systolic and diastolic TPGs, and decrease in systolic GOA, which translates to decreased valve performance for more rigid leaflets. An increased thrombogenic risk is detected for the most rigid valves. Peak solid stresses are also analyzed, and observed to increase with rigidity, elevating risk of valve calcification and structural failure. The immersed FSI method was implemented in a high-performance computing multi-physics simulation software, and validated against a well known FSI benchmark. The aortic valve bioprosthesis model is qualitatively contrasted against experimental data, showing good agreement in closed and open states. To the authors' knowledge this is the first computational FSI model to study the effect of eccentricity or leaflet rigidity on thrombogenic biomarkers, providing a novel tool to aid device manufacturers and clinical practitioners.

scholarly journals Evaluating the use of straw bales in achieving passive house certification (PHIUS+ 2015) in western Canada

2021 ◽  
Author(s):  
Ashley Lubyk
Keyword(s):  
Carbon Footprint ◽  
High Performance ◽  
Climate Impact ◽  
Simulation Software ◽  
Embodied Energy ◽  
Single Family ◽  
Passive House ◽  
House Design ◽  
Straw Bale ◽  
Wall System

Achieving Passive House certification requires super insulation which can significantly raise the embodied energy and carbon footprint of a project, effectively front-end loading the climate impact, especially where petrochemical foam-based products are used. This research sought to evaluate the use of straw bales - a low embodied energy, carbon sequestering agricultural by-product - to achieve PHIUS+2015 certification. A straw bale wall system was adapted to a single-family detached reference house designed to meet the Passive House standard. The wall system was evaluated for applicability across three Western Canadian cities using WUFI Passive energy simulation software to evaluate compliance; thermal bridging and hygrothermal performance were also evaluated. It was found that the proposed straw bale wall assembly satisfied the PHIUS+ 2015 requirements in all three locations - Saskatoon, Calgary, and Kelowna - with only minor changes required to the reference house design. The annual heating demand and peak heating load, the two targets most sensitive to design changes, were, respectively, 4% and 8.6% below the target in Saskatoon, 63.1% and 21.3% below in Calgary, and 63.1% and 32.6% below in Kelowna. The research also revealed that maintaining a high degree of air tightness is essential for satisfying the requirements. Overall, this research demonstrates that straw bales can be a beneficial component in creating high performance enclosures without exacting a large embodied carbon footprint.

Sign in / Sign up

Export Citation Format

Share Document