Investigation on the Effect of High-Frequency Torsional Impacts on the Torsional Vibration of an Oilwell Drill String in Slip Phase

2019 ◽  
pp. 101-121
Author(s):  
Liping Tang ◽  
Xiaohua Zhu ◽  
Yunlai Zhou
Keyword(s):  
Torsional Vibration ◽  
High Frequency ◽  
Drill String

Study of stick–slip suppression and robustness to parametric uncertainty in drill strings containing torsional vibration tool using sliding-mode control

2021 ◽  
pp. 146441932110452
Author(s):  
Jialin Tian ◽  
Jie Wang ◽  
Siqi Zhou ◽  
Yinglin Yang ◽  
Liming Dai
Keyword(s):  
Torsional Vibration ◽  
Complex Dynamics ◽  
Sliding Mode ◽  
Parametric Uncertainty ◽  
Drill String ◽  
Lumped Parameter Model ◽  
Drilling Process ◽  
Drill Bit ◽  
Stick Slip ◽  
Drilling Operations

Excessive stick–slip vibration of drill strings can cause inefficiency and unsafety of drilling operations. To suppress the stick–slip vibration that occurred during the downhole drilling process, a drill string torsional vibration system considering the torsional vibration tool has been proposed on the basis of the 4-degree of freedom lumped-parameter model. In the design of the model, the tool is approximated by a simple torsional pendulum that brings impact torque to the drill bit. Furthermore, two sliding mode controllers, U1 and U2, are used to suppress stick–slip vibrations while enabling the drill bit to track the desired angular velocity. Aiming at parameter uncertainty and system instability in the drilling operations, a parameter adaptation law is added to the sliding mode controller U2. Finally, the suppression effects of stick–slip and robustness of parametric uncertainty about the two proposed controllers are demonstrated and compared by simulation and field test results. This paper provides a reference for the suppression of stick–slip vibration and the further study of the complex dynamics of the drill string.

Torsional Vibrations and Nonlinear Dynamic Characteristics of Drill Strings and Stick-Slip Reduction Mechanism

2019 ◽  
Vol 14 (8) ◽  
Author(s):  
Jialin Tian ◽  
Genyin Li ◽  
Liming Dai ◽  
Lin Yang ◽  
Hongzhi He ◽  
...  
Keyword(s):  
Torsional Vibration ◽  
Nonlinear Dynamic ◽  
Drill String ◽  
Drilling Process ◽  
Drill Bit ◽  
Torsional Vibrations ◽  
Reduction Mechanism ◽  
Nonlinear Dynamic Model ◽  
Stick Slip ◽  
Research Results

Torsional stick–slip vibrations easily occur when the drill bit encounters a hard or a hard-soft staggered formation during drilling process. Moreover, serious stick–slip vibrations of the drill string is the main factor leading to low drilling efficiency or even causing the downhole tools failure. Therefore, establishing the stick–slip theoretical model, which is more consistent with the actual field conditions, is the key point for new drilling technology. Based on this, a new torsional vibration tool is proposed in this paper, then the multidegree-of-freedom torsional vibrations model and nonlinear dynamic model of the drill string are established. Combined with the actual working conditions in the drilling process, the stick–slip reduction mechanism of the drill string is studied. The research results show that the higher rotational speed of the top drive, smaller viscous damping of the drill bit, and smaller WOB (weight on bit) will prevent the stick–slip vibration to happen. Moreover, the new torsional vibration tool has excellent stick–slip reduction effect. The research results and the model established in this paper can provide important references for reducing the stick–slip vibrations of the drill string and improving the rock-breaking efficiency.

scholarly journals Stick-slip and Torsional Friction Factors in Inclined Wellbores

2018 ◽  
Vol 148 ◽  
pp. 16002 ◽  
Author(s):  
Ulf Jakob F. Aarsnes ◽  
Roman J. Shor
Keyword(s):  
High Frequency ◽  
String Model ◽  
Drill String ◽  
Distributed Model ◽  
Dynamic Friction ◽  
Stick Slip ◽  
Rock Interaction ◽  
Interaction Field ◽  
Friction Factors ◽  
Start Ups

Stick slip is usually considered a phenomenon of bit-rock interaction, but is also often observed in the field with the bit off bottom. In this paper we present a distributed model of a drill string with an along-string Coulomb stiction to investigate the effect of borehole inclination and borehole friction on the incidence of stick-slip. This model is validated with high frequency surface and downhole data and then used to estimate static and dynamic friction. A derivation of the torsional drill string model is shown and includes the along-string Coulomb stiction of the borehole acting on the string and the ‘velocity weakening’ between static and dynamic friction. The relative effects of these two frictions is investigated and the resulting drillstring behavior is presented. To isolate the effect of the along-string friction from the bit-rock interaction, field data from rotational start-ups after a connection (with bit off bottom) is considered. This high frequency surface and downhole data is then used to validate the surface and downhole behavior predicted by the model. The model is shown to have a good match with the surface and downhole behavior of two deviated wellbores for depths ranging from 1500 to 3000 meters. In particular, the model replicates the amplitude and period of the oscillations, in both the topside torque and the downhole RPM, as caused by the along-string stick slip. It is further shown that by using the surface behavior of the drill-string during rotational startup, an estimate of the static and dynamic friction factors along the wellbore can be obtained, even during stick-slip oscillations, if axial tension in the drillstring is considered. This presents a possible method to estimate friction factors in the field when off-bottom stick slip is encountered, and points in the direction of avoiding stick slip through the design of an appropriate torsional start-up procedure without the need of an explicit friction test.

Understanding and Eliminating Drill String Twist-Offs by the Collection of High Frequency Dynamics Data

2011 ◽  
Author(s):  
Constantijn Raap ◽  
Andrew David Craig ◽  
Daniel Perez Garcia
Keyword(s):  
High Frequency ◽  
Drill String

High frequency torsional vibration of vehicular driveline systems in clonk

2002 ◽  
Vol 9 (2) ◽  
pp. 127 ◽  
Author(s):  
A. Farshidianfar ◽  
M. Ebrahimi ◽  
H. Rahnejat ◽  
M. T. Menday
Keyword(s):  
Torsional Vibration ◽  
High Frequency

Analysis of stick-slip reduction for a new torsional vibration tool based on PID control

2019 ◽  
Vol 234 (1) ◽  
pp. 82-94 ◽  
Author(s):  
Jialin Tian ◽  
Yi Zhou ◽  
Lin Yang ◽  
Shuhui Hu
Keyword(s):  
Torsional Vibration ◽  
Pid Control ◽  
Control Method ◽  
Field Tests ◽  
Rock Breaking ◽  
Drill String ◽  
Viscosity Reduction ◽  
Stick Slip ◽  
Deep Wells ◽  
Reduction Characteristics

The phenomenon of stick-slip vibration is widespread in the exploration of deep and ultra-deep wells. It causes the reduction of the mechanical drilling rate and wastes the driving energy. Besides, it also accelerates the aging and failure of the drill strings and threatens the safety of drilling seriously. In order to effectively control the stick-slip vibration of the drill string, a new type of torsional vibration tool is proposed in this paper firstly. Then, the theoretical model of the drill string system based on the tool is established. And then, the viscosity reduction characteristics of the new torsional vibration tool are studied by the PID control method. Finally, field tests were carried out in comparison with simulation. The results show that the new torsional vibration tool can reduce the stick-slip vibration. And the two PID control equations can both control the drill bit speed in real time through changing the turntable speed. The results also have important reference significance for reducing and controlling the stick-slip vibration of the drill string and improving the rock-breaking efficiency.

scholarly journals Drillstring Failure: Analytical and Experimental Approach

2019 ◽  
Vol 300 ◽  
pp. 04004
Author(s):  
Edris Hassan ◽  
Jamil Abdo ◽  
Jan Kwak ◽  
Abdullah Al Shabibi
Keyword(s):  
Torsional Vibration ◽  
Oil And Gas ◽  
Drill Pipe ◽  
Oil And Gas Industry ◽  
Drill String ◽  
Design Parameters ◽  
Experimental Investigations ◽  
Torsional Vibrations ◽  
Stick Slip ◽  
The Impact

Drilling is one of the costliest activities in oil and gas industry due to the complexity of interactions with downhole rock formation. Under such conditions, the uncertainty of drillstring behaviour increase and hence it becomes difficult to predict the causes, occurrences, and types of failures. Lateral and torsional vibrations often cause failure of Bottom Hole Assembly (BHA), drillstring failure, drill bit and wall borehole damages. In this work, a model is presented to determine the impact of lateral and torsional vibrations on a drillstring during the drilling operation. The model aims to mimic real drillstring behaviour inside a wellbore with regards to its dynamic movements due to multiple real situations such as eccentricity of collars, drill pipe sections, and stick-slip phenomena occurring due to the interaction of the bit and the drillstring with the well formation. The work aims to develop a basis for determining critical operating speeds and design parameters to provide safe drilling procedures and reduce drill string fatigue failure. Lagrangian approach is used in this study to attain drillstring lateral and torsional vibration coupling equations. The nonlinear equations are solved numerically to obtain the response of the system. In this work, we also present a brief description of an in-house constructed experimental setup. The setup has the capability to imitate the downhole lateral and torsional vibration modes. Parameters from the experimental investigations are incorporated for validation of the mathematical models and for prediction of the drillstring fatigue life. Such investigations are essential for oil and gas industries as they provide solutions and recommendations about operational speed, lateral and torsional amplitudes measurements and corrections, and the conditions for avoiding occurrence of natural frequencies of the system.

Sign in / Sign up

Export Citation Format

Share Document