Clamping Perception for Residual Stress-Induced Deformation of Thin-Walled Parts

2021 ◽  
pp. 167-198
Author(s):  
Dinghua Zhang ◽  
Ming Luo ◽  
Baohai Wu ◽  
Ying Zhang
Keyword(s):  
Residual Stress ◽  
Thin Walled

Analysis of circumferentially welded thin-walled cylinders to study the effects of tack weld orientations and joint root opening on residual stress fields

2009 ◽  
Vol 223 (5) ◽  
pp. 1037-1049 ◽  
Author(s):  
N U Dar ◽  
E M Qureshi ◽  
A M Malik ◽  
M M I Hammouda ◽  
R A Azeem
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Arc Welding ◽  
Operating Conditions ◽  
Stress Fields ◽  
Welded Structures ◽  
Prime Concern ◽  
Thin Walled ◽  
Tack Weld ◽  
Welding Processes

In recent years, the demand for resilient welded structures with excellent in-service load-bearing capacity has been growing rapidly. The operating conditions (thermal and/or structural loads) are becoming more stringent, putting immense pressure on welding engineers to secure excellent quality welded structures. The local, non-uniform heating and subsequent cooling during the welding processes cause complex thermal stress—strain fields to develop, which finally leads to residual stresses, distortions, and their adverse consequences. Residual stresses are of prime concern to industries producing weld-integrated structures around the globe because of their obvious potential to cause dimensional instability in welded structures, and contribute to premature fracture/failure along with significant reduction in fatigue strength and in-service performance of welded structures. Arc welding with single or multiple weld runs is an appropriate and cost-effective joining method to produce high-strength structures in these industries. Multi-field interaction in arc welding makes it a complex manufacturing process. A number of geometric and process parameters contribute significant stress levels in arc-welded structures. In the present analysis, parametric studies have been conducted for the effects of a critical geometric parameter (i.e. tack weld) on the corresponding residual stress fields in circumferentially welded thin-walled cylinders. Tack weld offers considerable resistance to the shrinkage, and the orientation and size of tacks can altogether alter stress patterns within the weldments. Hence, a critical analysis for the effects of tack weld orientation is desirable.

Analysis of circumferentially arc welded thin-walled cylinders to investigate the residual stress fields

2008 ◽  
Vol 46 (12) ◽  
pp. 1391-1401 ◽  
Author(s):  
Afzaal M. Malik ◽  
Ejaz M. Qureshi ◽  
Naeem Ullah Dar ◽  
Iqbal Khan
Keyword(s):  
Residual Stress ◽  
Stress Fields ◽  
Thin Walled

Investigation of redistribution mechanism of residual stress during multi-process milling of thin-walled parts

2019 ◽  
Vol 103 (1-4) ◽  
pp. 1459-1466
Author(s):  
Miaoxian Guo ◽  
Xiaohui Jiang ◽  
Yi Ye ◽  
Zishan Ding ◽  
Zhenya Zhang
Keyword(s):  
Residual Stress ◽  
Redistribution Mechanism ◽  
Thin Walled

scholarly journals Effects of Milling Parameters on Distribution of Residual Stress During the Milling of Curved Thin-Walled Parts

2019 ◽  
Vol 224 ◽  
pp. 05009
Author(s):  
Xiangjing Kong ◽  
Zishan Ding ◽  
Lijun Xu ◽  
Lijian Zhu ◽  
Jian Zhang ◽  
...  
Keyword(s):  
Residual Stress ◽  
Curved Surface ◽  
Surface Residual Stress ◽  
Milling Parameters ◽  
Aerospace Research ◽  
Research Areas ◽  
Milling Simulation ◽  
Reasonable Range ◽  
Thin Walled ◽  
And Control

With the increasing application of curved thin-walled parts, the evaluation and control of curved surface residual stress in milling are becoming increasingly demanding. However, effects of milling parameters on distribution of residual stress remains a major challenge in the present aerospace research areas. In this paper, , impacts of milling parameters on curved surface residual stress have been investigated in a series of residual stress experiments and simulations. It is found that the residual stress can be lowered by increasing milling speed and tool radius within a reasonable range. The superposition of curved surface residual stress under two machining conditions have been analyzed using the milling simulation model. It has been found that the curved surface residual stress induced by the subsequent cutting will be superimposed on the curved surface residual stress induced by the previous cutting and that the superposition rates of residual stress induced by up milling are larger than down milling.

A Method for Measurement of Axisymmetric Axial Residual Stresses in Circumferentially Welded Thin-Walled Cylinders

1985 ◽  
Vol 107 (3) ◽  
pp. 181-185 ◽  
Author(s):  
Weili Cheng ◽  
Iain Finnie
Keyword(s):  
Residual Stress ◽  
Stress Field ◽  
Axial Component ◽  
Residual Stress Field ◽  
Strain Measurements ◽  
Thin Walled ◽  
Predicted Values ◽  
Inside Wall ◽  
Good Agreement

A new method is proposed for measuring the axial component of an axisymmetric residual stress field in thin-walled cylinders. The specific application considered is determination of the stress at the centerline of a circumferential weld. The method involves strain measurements at the outside wall while a complete circumferential slit is cut to increasing depths from the inside wall. The technique is applied to the simple case of a single pass weld. Experimental results are in good agreement with predicted values.

Stress Intensity Factors due to Residual Stresses in Thin-Walled Girth-Welded Pipes

1981 ◽  
Vol 103 (1) ◽  
pp. 66-75 ◽  
Author(s):  
E. F. Rybicki ◽  
R. B. Stonesifer ◽  
R. J. Olson
Keyword(s):  
Residual Stress ◽  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Stress Distribution ◽  
Intensity Factor ◽  
Crack Growth ◽  
Residual Stress Distribution ◽  
Intensity Factors ◽  
Thin Walled Pipe ◽  
Thin Walled

The effect of a girth-weld-induced residual stress field on the linear elastic fracture mechanics of a thin-walled pipe is examined. The procedure for using the residual stress distribution to compute KI and KII for a circumferential crack which is growing radially is described. In addition to the two-pass girth weld, stress intensity factors are computed for a residual stress distribution in a flat plate and for a hypothetical residual stress state in a second thin-walled pipe. The computed stress intensity factor for the flat plate geometry and its residual stress distribution are compared with a solution from the literature as a check on the computational procedure. The through-the-thickness residual stress distribution due to the two-pass girth weld is similar to a half-cosine wave. For purposes of comparison, the hypothetical through-the-thickness distribution selected for the second pipe is similar to a full cosine wave. The stress intensity factor is presented as a function of crack depth for a crack initiating on the inner surface of the pipe. The redistribution of residual stresses due to crack growth is also shown for selected crack lengths. The study shows that residual stress-induced crack growth in pipes can be significantly different from that in flat plates due to the possibility of locked-in residual bending moments in the pipe. These locked-in moments can have effects similar to externally applied loads and can either promote or restrain crack growth. A residual stress distribution is illustrated in which crack growth, if initiated, would continue through the entire wall. Also, a residual stress distribution is illustrated for which the crack could arrest after a certain amount of growth.

Sign in / Sign up

Export Citation Format

Share Document