Efficiency Enhancement in a Piezoelectric Energy Harvester for a Low-Frequency System Using Synchronous Charge Inversion

2021 ◽  
pp. 497-503
Author(s):  
Parul Chaudhary ◽  
Puneet Azad
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Efficiency Enhancement ◽  
Charge Inversion ◽  
Piezoelectric Energy

scholarly journals A Multi-Mode Broadband Vibration Energy Harvester Composed of Symmetrically Distributed U-Shaped Cantilever Beams

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 203
Author(s):  
Xiaohua Huang ◽  
Cheng Zhang ◽  
Keren Dai
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Experimental Results ◽  
Vibration Energy ◽  
Cantilever Beams ◽  
Resonant Frequencies ◽  
Promising Alternative ◽  
Piezoelectric Energy ◽  
Straight Beam ◽  
Resonance Frequencies

Using the piezoelectric effect to harvest energy from surrounding vibrations is a promising alternative solution for powering small electronic devices such as wireless sensors and portable devices. A conventional piezoelectric energy harvester (PEH) can only efficiently collect energy within a small range around the resonance frequency. To realize broadband vibration energy harvesting, the idea of multiple-degrees-of-freedom (DOF) PEH to realize multiple resonant frequencies within a certain range has been recently proposed and some preliminary research has validated its feasibility. Therefore, this paper proposed a multi-DOF wideband PEH based on the frequency interval shortening mechanism to realize five resonance frequencies close enough to each other. The PEH consists of five tip masses, two U-shaped cantilever beams and a straight beam, and tuning of the resonance frequencies is realized by specific parameter design. The electrical characteristics of the PEH are analyzed by simulation and experiment, validating that the PEH can effectively expand the operating bandwidth and collect vibration energy in the low frequency. Experimental results show that the PEH has five low-frequency resonant frequencies, which are 13, 15, 18, 21 and 24 Hz; under the action of 0.5 g acceleration, the maximum output power is 52.2, 49.4, 61.3, 39.2 and 32.1 μW, respectively. In view of the difference between the simulation and the experimental results, this paper conducted an error analysis and revealed that the material parameters and parasitic capacitance are important factors that affect the simulation results. Based on the analysis, the simulation is improved for better agreement with experiments.

A low frequency piezoelectric energy harvester with trapezoidal cantilever beam: theory and experiment

2016 ◽  
Vol 23 (8) ◽  
pp. 3457-3466 ◽  
Author(s):  
Guangyi Zhang ◽  
Shiqiao Gao ◽  
Haipeng Liu ◽  
Shaohua Niu
Keyword(s):  
Cantilever Beam ◽  
Energy Harvester ◽  
Low Frequency ◽  
Beam Theory ◽  
Piezoelectric Energy ◽  
Theory And Experiment

Magnetic plucked meso-scale piezoelectric energy harvester for low-frequency rotational motion

2021 ◽  
Author(s):  
Chao-Ting Chen ◽  
Wei-Jiun Su ◽  
Wen-Jong Wu ◽  
dejan vasic ◽  
François Costa
Keyword(s):  
Rotational Motion ◽  
Energy Harvester ◽  
Low Frequency ◽  
Piezoelectric Energy ◽  
Meso Scale

Low‐frequency vibration‐based interdigital piezoelectric energy harvester and autonomous power regulating circuit

2015 ◽  
Vol 51 (23) ◽  
pp. 1916-1918 ◽  
Author(s):  
Cuixian Luo ◽  
Yanfen Wang ◽  
Pengwei Li
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Piezoelectric Energy ◽  
Low Frequency Vibration

Broadband Rotational Energy Harvesting Using Micro Energy Harvester

2018 ◽  
Author(s):  
Jui-Ta Chien ◽  
Yung-Hsing Fu ◽  
Chao-Ting Chen ◽  
Shun-Chiu Lin ◽  
Yi-Chung Shu ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Rotational Energy ◽  
Open Circuit ◽  
Maximum Output ◽  
Rotational Excitation ◽  
Rotating Speed ◽  
Piezoelectric Energy

This paper proposes a broadband rotational energy harvesting setup by using micro piezoelectric energy harvester (PEH). When driven in different rotating speed, the PEH can output relatively high power which exhibits the phenomenon of frequency up-conversion transforming the low frequency of rotation into the high frequency of resonant vibration. It aims to power self-powered devices used in the applications, like smart tires, smart bearings, and health monitoring sensors on rotational machines. Through the excitation of the rotary magnetic repulsion, the cantilever beam presents periodically damped oscillation. Under the rotational excitation, the maximum output voltage and power of PEH with optimal impedance is 28.2 Vpp and 663 μW, respectively. The output performance of the same energy harvester driven in ordinary vibrational based excitation is compared with rotational oscillation under open circuit condition. The maximum output voltage under 2.5g acceleration level of vibration is 27.54 Vpp while the peak output voltage of 36.5 Vpp in rotational excitation (in 265 rpm).

scholarly journals Piezoelectric Energy Harvesting with an Ultrasonic Vibration Source

Actuators ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 8
Author(s):  
Tao Li ◽  
Pooi Lee
Keyword(s):  
Energy Harvesting ◽  
High Power ◽  
High Frequency ◽  
Energy Harvester ◽  
Impedance Matching ◽  
Low Frequency ◽  
Vibration Source ◽  
Piezoelectric Energy ◽  
Power Ultrasonic ◽  
Ultrasonic Cutting

A piezoelectric energy harvester was developed in this paper. It is actuated by the vibration leakage from the nodal position of a high-power ultrasonic cutting transducer. The harvester was excited at a low displacement amplitude (0.73 µmpp). However, its operation frequency is quite high and reaches the ultrasonic range (24.4 kHz). Compared with another low frequency harvester (66 Hz), both theoretical and experimental results proved that the advantages of this high frequency harvester include (i) high current generation capability (up to 20 mApp compared to 1.3 mApp of the 66 Hz transducer) and (ii) low impedance matching resistance (500 Ω in contrast to 50 kΩ of the 66 Hz transducer). This energy harvester can be applied either in sensing, or vibration controlling, or simply energy harvesting in a high-power ultrasonic system.

A low frequency and broadband piezoelectric energy harvester using asymmetrically serials connected double clamped–clamped beams

2014 ◽  
Vol 53 (8) ◽  
pp. 087101 ◽  
Author(s):  
Zhu Liang ◽  
Chundong Xu ◽  
Bo Ren ◽  
Haosu Luo ◽  
Dong Wang
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Piezoelectric Energy ◽  
Clamped Beams

A low-frequency MEMS piezoelectric energy harvester with a rectangular hole based on bulk PZT film

2018 ◽  
Vol 117 ◽  
pp. 21-27 ◽  
Author(s):  
Yingwei Tian ◽  
Guimiao Li ◽  
Zhiran Yi ◽  
Jingquan Liu ◽  
Bin Yang
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Rectangular Hole ◽  
Piezoelectric Energy ◽  
Pzt Film
Sign in / Sign up

Export Citation Format

Share Document