An Integrated Technique for Security of Cellular 5G-IoT Network Healthcare Architecture

2022 ◽  
pp. 549-563
Author(s):  
Manoj Verma ◽  
Jitendra Sheetlani ◽  
Vishnu Mishra ◽  
Megha Mishra
Keyword(s):  
Integrated Technique ◽  
Healthcare Architecture

scholarly journals Design and Evaluation of Large-Scale IoT-Enabled Healthcare Architecture

2021 ◽  
Vol 11 (8) ◽  
pp. 3623
Author(s):  
Omar Said ◽  
Amr Tolba
Keyword(s):  
Packet Loss ◽  
Large Scale ◽  
Performance Metrics ◽  
Medical System ◽  
Healthcare Data ◽  
High Altitude Platforms ◽  
Wide Range ◽  
Simulation Results ◽  
Healthcare Architecture ◽  
The Internet Of Things

Employment of the Internet of Things (IoT) technology in the healthcare field can contribute to recruiting heterogeneous medical devices and creating smart cooperation between them. This cooperation leads to an increase in the efficiency of the entire medical system, thus accelerating the diagnosis and curing of patients, in general, and rescuing critical cases in particular. In this paper, a large-scale IoT-enabled healthcare architecture is proposed. To achieve a wide range of communication between healthcare devices, not only are Internet coverage tools utilized but also satellites and high-altitude platforms (HAPs). In addition, the clustering idea is applied in the proposed architecture to facilitate its management. Moreover, healthcare data are prioritized into several levels of importance. Finally, NS3 is used to measure the performance of the proposed IoT-enabled healthcare architecture. The performance metrics are delay, energy consumption, packet loss, coverage tool usage, throughput, percentage of served users, and percentage of each exchanged data type. The simulation results demonstrate that the proposed IoT-enabled healthcare architecture outperforms the traditional healthcare architecture.

Binary MOF of iron and copper for treating ciprofloxacin contaminated waste water by integrated technique of adsorption and photocatalytic degradation

2021 ◽  
Author(s):  
Aditi Chatterjee ◽  
Amiya K Jana ◽  
Jayanta Kumar Basu
Keyword(s):  
Waste Water ◽  
Water Pollution ◽  
Photocatalytic Degradation ◽  
Metal Organic Framework ◽  
Single Step ◽  
New Approach ◽  
Metal Organic ◽  
Integrated Technique ◽  
Contaminated Waste ◽  
Control Water

Adsorption assisted photocatalysis is a new approach to control water pollution. A novel metal organic framework MIL 53(Fe-Cu) was formulated by a single step solvothermal route. The newly developed MOF...

scholarly journals A Multistep Iter for Functional Reconstruction in Mangled Upper Limb: A Retrospective Analysis of Integrated Surgical and Medical Approach

Medicina ◽  
2020 ◽  
Vol 56 (8) ◽  
pp. 398 ◽  
Author(s):  
Francesco De Francesco ◽  
Andrea Marchesini ◽  
Andrea Campodonico ◽  
Alexander Dietrich Neuendorf ◽  
Pier Paolo Pangrazi ◽  
...  
Keyword(s):  
Upper Limb ◽  
Free Flaps ◽  
High Energy ◽  
Immediate Reconstruction ◽  
Pressure Therapy ◽  
Tissue Replacement ◽  
Multi Stage ◽  
Radical Debridement ◽  
Integrated Technique

Background and objectives: Complex limb wounds with multiple tissue involvement are commonly due to high energy trauma. Tissue damage is a dynamic entity and the exact extent of the injury is rarely instantly perceptible. Hence, reconstruction frequently involves a multi-stage procedure concluding with tissue replacement. Materials and Methods: A retrospective study was conducted between 2006 and 2018 and included 179 patients with contaminated multi-tissue injuries treated with hyperbaric oxygen therapy, negative pressure therapy, physiotherapy and drug treatment associated with multiple surgical time in a multistep approach, focusing on pain levels and wound closure rates. Results: Despite the long-term response to traumatic events, a combined approach of delayed surgical reconstructive time in mangled upper limb yielded satisfactory functional outcomes. Conclusions: The complex upper limb wound with deep tissue exposure may be treated with a multi-stage procedure alternatively to immediate reconstruction. The integrated technique enables the preservation of existing healthy tissue and concurrent radical debridement, reducing the risk of infection, as well as avoiding the loss of free flaps and dehiscence due to incorrect wound estimation.

SoilChip-XPS integrated technique to study formation of soil biogeochemical interfaces

2017 ◽  
Vol 113 ◽  
pp. 71-79 ◽  
Author(s):  
Xizhi Huang ◽  
Yiwei Li ◽  
Bifeng Liu ◽  
Georg Guggenberger ◽  
Olga Shibistova ◽  
...  
Keyword(s):  
Integrated Technique

A Numerical and Experimental Study of Cavitation in a Hot Tensile Axisymmetric Testpiece

2005 ◽  
Vol 40 (6) ◽  
pp. 571-586 ◽  
Author(s):  
Y Liu ◽  
J Lin ◽  
T. A Dean ◽  
D. C. J Farrugia
Keyword(s):  
Experimental Study ◽  
Flow Stress ◽  
Grain Boundary ◽  
Thermal Gradient ◽  
Tensile Testing ◽  
Tensile Deformation ◽  
Strain Rates ◽  
Test Results ◽  
Integrated Technique ◽  
Hot Tensile Deformation

During axisymmetric hot tensile testing, necking normally takes place due to the thermal gradient and the accumulation of microdamage. This paper introduces an integrated technique to predict the damage and necking evolution behaviour. Firstly, a set of multiaxial mechanism-based unified viscoplastic-damage constitutive equations is presented. This equation set, which models the evolution of grain boundary (intragranular) and plasticity-induced (intergranular) damage, is determined for a free-cutting steel tested over a range of temperatures and strain rates on a Gleeble thermomechanical simulator. This model has been implemented using the CREEP subroutine of the commercial finite element (FE) solver ABAQUS. Numerical procedures to simulate axisymmetric hot tensile deformation are developed with consideration of the thermal gradient along the axis of the tensile testpiece. FE simulations are carried out to reproduce the necking phenomenon and the evolution of plasticity-induced and grain boundary damage. The simulated results have been validated with experimental tensile test results. The effects of necking and its associated stress state on flow stress and ductility are investigated. The flow stress and ductility data obtained from a Gleeble material simulator under various hot deformation conditions have also been numerically studied.

scholarly journals The Use of Innovation Technologies in the Formation of Students' Professional Competences

2019 ◽  
Vol 9 (1) ◽  
pp. 6898-6902
Keyword(s):  
Educational Technology ◽  
Vocational Education ◽  
Integrated Technology ◽  
The Future ◽  
Integrated Technique

This article is dedicated to the problem of the usage of educational integrated technology during the process of training of the future vocational education teachers in order to form independently and productively thinking personality. Keywords: technology, integrated technique, competence, context educational technology. Аннотация. Данная статья посвящена проблеме использования комплексной технологии обучения в процессе подготовки будущих преподавателей профессионального образования с целью формирования творческой, самостоятельно и продуктивно мыслящих личности.

Sign in / Sign up

Export Citation Format

Share Document