Measurement of small temperature variations on the surface of solid bodies

1962 ◽  
Vol 5 (2) ◽  
pp. 120-123
Author(s):  
G. B. Rozenblit
2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Naoki Tani ◽  
Zubaidah Aimi Abdul Hamid ◽  
Natra Joseph ◽  
Othman Sulaiman ◽  
Rokiah Hashim ◽  
...  

2011 ◽  
Vol 10 ◽  
pp. 2330-2335 ◽  
Author(s):  
J. Galán López ◽  
J. Peirs ◽  
P. Verleysen ◽  
J. Degrieck

1966 ◽  
Vol 12 (10) ◽  
pp. 659-669 ◽  
Author(s):  
Elizabeth Carlsen Gerst ◽  
Odd S Steinsland ◽  
William W Walcott

Abstract Small temperature variations during fluorescent analysis with the trihydroxyindole method can introduce significant errors in the measurement of 15µg./L. or less of epinephrine or norepinephrine. To minimize temperature differences, we have devised a simple, constant-temperature system for the Farrand fluorometer. Decomposition of ascorbic acid prior to and during analysis also must be prevented. Sodium borchydride was found to be an effective stabilizing agent that contributes negligible fluorescence.These modifications minimize or eliminate much of the difficulty previously encountered in the use of the trihydroxyindole method.


1944 ◽  
Vol 6c (3) ◽  
pp. 217-227 ◽  
Author(s):  
A. L. Pritchard

High temperatures appear to shorten and low temperatures lengthen the incubation period of pink salmon (Oncorhynchus gorbuscha) eggs. The fry migrate to sea during spring when the yolk sac is almost completely absorbed. There is no significant difference from year to year in qualitative description or in certain countable physical characters. Migration is usually swift and vigorous. The effect of light is demonstrated by the fact that movement is limited to the hours of darkness and slowed by direct moonlight. Rainfall does not initiate migration but causes fry already in motion to proceed more quickly. Small temperature variations have little effect. Oxygen content and pH of the water vary coincidentally with rainfall.


2015 ◽  
Vol 72 ◽  
pp. 195-203 ◽  
Author(s):  
Carosena Meola ◽  
Simone Boccardi ◽  
Giovanni Maria Carlomagno

On the occasion of a brilliant display of aurora some apparently rotatory movements in the position of the corona suggested to the author the possible existence of similar changes of direction in the total magnetic force during disturbance. For investigating these changes the most convenient available data were the plates published with the “Greenwich Magnetical and Meteorological Observations” (hereafter referred to as the “Report”), showing on a reduced scale the diurnal registers of the three components of magnetic force for several disturbed days in each year. The eight years 1900-7 were dealt with, and a preliminary inspection of all the registers figured for these years was made to select an example for special consideration. The published registers are reduced in scale from the originals in the ratio 11:20, and to lessen the chance of error on this account, it was decided to select a disturb­ance showing comparatively slow, but steady and decided, changes. The registers selected in the first instance were those for October 12, 1903, and it was decided to determine the variation in direction of the total force from 18 hours onwards, at intervals of about 5 minutes, leaving out of account the effect of the small temperature variations recorded, for reasons presently to be stated. This variation in direction was found in terms of transverse deflecting force, the unit employed being 1 x 10 -5 C. G. S. (1 γ ). In the following remarks the letters D, H, and Z denote the declination, the horizontal force, and the vertical force, respectively; F and I, respectively, denote the total force and the dip; while the prefix ∆ signifies inequality increments. Ordinates of the components D, H, and Z were measured on the plate at time intervals of 1/40 inch, corresponding to a measure once every 5 minutes, approximately. The zero of a scale divided to 1/40 inch was applied to the immediately preceding hour line, and points on the respective traces were thus set off at equal increments of time, and, from these, the force ordinates were measured to the adopted base lines. A division of the hour intervals into 12 equal parts was not so important as having the ordinates measured at exact time equivalents in all three registers. Regarding the accuracy with which the three registers were placed in time juxtaposition for the purpose of photo-lithographic reduction there is the assurance given in the “Report” (p. 37 for 1903) that great attention has been paid to this detail.


2021 ◽  
Vol 20 (3) ◽  
pp. 03
Author(s):  
F. A. R. Campos ◽  
L. R. R. Da Silva

With technological advances, polymers are increasingly used to manufacture various components that were previously exclusively manufactured with metals. One of the significant challenges in polymer processing is its relatively low thermal resistance, since relatively small temperature variations, especially when compared to metals and ceramics, lead to significant changes in material properties and in the final component geometry. This paper investigated how the internal temperature of polymers, subjected to an intermittent particulate jet deposition process in conjunction with a continuous flow of hot air, is affected by variation in surface roughness, polymer type, and air pressure. As the main result, low efficiency in heat transfer was caused by the combination of the convective nature of the heat exchange with the low thermal conductivity of the polymers. The variables with the most significant influence on the process were the intermittence and pressure of the particulate jet.


1931 ◽  
Vol 5 (2) ◽  
pp. 156-161 ◽  
Author(s):  
D. C. Rose

The instrument described in this paper was designed for the measurement of relative humidity in the slip stream of flying aircraft. As the temperatures to be measured are low, usually between 0°and − 10 °C., the temperature difference between wet and dry bulb thermometers is sufficiently small that, if mercury thermometers are used, in order to obtain the accuracy required, they would have to be of such fine bore that they could not be read from any distance. As a result wet and dry bulb resistance thermometers have been built connected to a special bridge circuit by means of which the temperature difference can be measured to 0.1 °C. or better. The actual dry bulb temperature can be read by a change in the circuit or by a mercury or alcohol thermometer of fairly large bore which can be read at some distance. In the bridge circuit the two thermometers form two arms of a bridge so that temperature variations in the leads are automatically compensated. A slide wire forms a part of the bridge circuit and the constants are so arranged that a very simple relation gives the difference in temperature of the wet and dry bulbs.


1986 ◽  
Vol 23 (8) ◽  
pp. 1117-1137 ◽  
Author(s):  
Maurice Brunel ◽  
Jean-Robert Kienast

Tectonic and microtectonic data in eastern Nepal indicate that the major observed thrusting (100 km) on the Main Central Thrust (MCT) postdates the Barrovian metamorphism of the High Himalaya gneisses. This result, at variance with the famous "reverse metamorphism model," better explains the abnormal metamorphic superpositions in the Himalayas and accounts for the lack of high-pressure assemblages under the thick, allochtonous High Himalaya Tibetan slab.Pressure and temperature estimates by microprobe analysis on plagioclase, biotite, garnet, kyanite, sillimanite, and cordierite assemblages are presented for samples collected along the MCT shear zone and across the gneiss slab in the Everest–Makalu area. Since there is very little difference in pressure at the front of the slab (Kathmandu Klippe) and its root, these estimates support the existence of important late metamorphic thrusting. The decrease of pressure towards the top of the gneiss pile, combined with a small temperature increase, explains the kyanite–sillimanite transition. The reverse metamorphism model, which implies refolded isograds, predicts heat loss by conduction throughout the sole of the thrust; pressure–temperature variations and kyanite–sillimanite transition phases more likely reflect a late heat supply in the upper part of the gneisses. Intrusion of leucogranitic bodies, confined to the interface with the Tethyan sediments, could account for this heat supply.A new tectonic evolution model of the Himalayan intracrustal thrusts is discussed. Without completely denying the existence of a reverse metamorphism synchronous with the phases of early shearing, it can be shown that the metamorphic zonation seen at present was governed by the structure of the later shearing.


1940 ◽  
Vol 18a (8) ◽  
pp. 144-150
Author(s):  
W. H. Cook ◽  
T. A. Steeves

An enclosed system of piping partly filled with liquid ammonia was found to transfer useful quantities of heat to a bunker containing a solid refrigerant (ice), with temperature gradients of 30 to 50° F. without the use of forced circulation. The system could be adapted to reduce spatial temperature variations and provide thermostatic control where solid refrigerants are used, as in railway refrigerator cars. Such arrangements are discussed briefly.


Sign in / Sign up

Export Citation Format

Share Document