Structure/performance relationships in long chain dimethylamine oxide/sodium dodecylsulfate surfactant mixtures

Fluorescent probes enable detection of otherwise nonfluorescent species via highly sensitive laser-induced fluorescence. Organic amines are predominantly nonfluorescent and are of analytical interest in agricultural and food science, biomedical applications, and biowarfare detection. Alexa Fluor 488 N-hydroxysuccinimidyl ester (AF488 NHS-ester) is an amine-specific fluorescent probe. Here, we demonstrate low limit of detection of long-chain (C9to C18) primary amines and optimize AF488 derivatization of long-chain primary amines. The reaction was found to be equally efficient in all solvents studied (dimethylsulfoxide, ethanol, and N,N-dimethylformamide). While an organic base (N,N-diisopropylethylamine) is required to achieve efficient reaction between AF488 NHS-ester and organic amines with longer hydrophobic chains, high concentrations (>5 mM) result in increased levels of ethylamine and propylamine in the blank. Optimal incubation times were found to be >12 hrs at room temperature. We present an initial capillary electrophoresis separation for analysis using a simple micellar electrokinetic chromatography (MEKC) buffer consisting of 12 mM sodium dodecylsulfate (SDS) and 5 mM carbonate, pH 10. Limits of detection using the optimized labeling conditions and these separation conditions were 5–17 nM. The method presented here represents a novel addition to the arsenal of fluorescent probes available for highly sensitive analysis of small organic molecules.

Download Full-text

A conductometric investigation of hydroxypropylmethyl cellulose/sodium dodecyl sulfate/nonionic surfactant systems

Journal of the Serbian Chemical Society ◽

10.2298/jsc140321059p ◽

2014 ◽

Vol 79 (11) ◽

pp. 1421-1432 ◽

Cited By ~ 1

Author(s):

Lidija Petrovic ◽

Verica Sovilj ◽

Jadranka Milanovic ◽

Jaroslav Katona

Keyword(s):

Nonionic Surfactant ◽

Mixed Micelles ◽

Sodium Dodecyl ◽

Sodium Dodecylsulfate ◽

Conductometric Titration ◽

Pharmaceutical Products ◽

Tween 20 ◽

Ionic Surfactant ◽

Surfactant Mixtures ◽

Hydroxypropylmethyl Cellulose

Surfactant mixtures are very often used in various cosmetic and pharmaceutical products because they commonly act in synergism and provide more favorable properties than the single surfactants. At the same time, the 9 presence of polymers in mixtures of surfactants may lead to molecular interactions thereby affecting product stability and activity. For these reasons it is very important to determine the surfactant interactions influence on 1micellization and mixed micellization, as well as polymer-surfactants mixed micelles interactions. In this work we examined self-aggregation of nonionic surfactants, polysorbate 20 (Tween 20), polyoxyethylene octylphenyl ether (Triton X100) and polyoxyethylene-polyoxypropylene block copolymer (Pluronic F68) with ionic surfactant, sodium dodecylsulfate, in aqueous solution at 40?C using conductometric titration method. It was found that concentration region for mixed micelle formation depends on nonionic surfactant characteristics and its concentration. Formation of surfactants mixed micelles in the presence of nonionic polymer, hydroxypropylmethyl cellulose, and their binding to polymer hydrophobic sites, were investigated too. Analysis of obtained results points to different kinds of interactions in investigated systems, which are crucial for their application.

Download Full-text

Soft-contact Atomic Force Microscopy Imaging of Adsorbed Surfactant and Polymer Layers

Microscopy and Microanalysis ◽

10.1007/s100059910009 ◽

2000 ◽

Vol 6 (2) ◽

pp. 104-112 ◽

Cited By ~ 11

Author(s):

Barry D. Fleming ◽

Erica J. Wanless

Keyword(s):

Atomic Force Microscopy ◽

Sodium Dodecylsulfate ◽

Adsorbed Layer ◽

Vinyl Pyrrolidone ◽

Surfactant Mixtures ◽

Microscopy Imaging ◽

Force Microscopy ◽

Atomic Force ◽

Poly Vinyl Pyrrolidone ◽

The Many

The technique of atomic force microscopy (AFM) soft-imaging is outlined with respect to characterizing the adsorption of surfactants and polymers at the solid/liquid interface. This method utilizes the electrostatic and steric repulsion forces between the scanning probe and the sample to allow sensitive placement of the imaging probe near to the delicate surface layer. Specifically, the mixed adsorption of sodium dodecylsulfate (SDS) and poly(vinyl pyrrolidone) (PVP) on graphite is examined. Unlike the adsorbed layer in a solution of either component, the adsorbed layer in the mixture does not cover the substrate uniformly until equilibrium is reached (often hours later). The interesting kinetic and coverage effects observed are significant to the many applications reliant on adsorption from polymer-surfactant mixtures, especially to the flocculation of dispersions.

Download Full-text

Polymer Morphology Revealed by Staining Techniques

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100098204 ◽

1981 ◽

Vol 39 ◽

pp. 340-341

Author(s):

A. C. Reimschuessel ◽

V. Kramer

Keyword(s):

Polymer Melt ◽

Nylon 6 ◽

Morphological Features ◽

Negative Staining ◽

Polymer Morphology ◽

Crystallizable Polymer ◽

Staining Techniques ◽

Long Chain

Staining techniques can be used for either the identification of different polymers or for the differentiation of specific morphological domains within a given polymer. To reveal morphological features in nylon 6, we choose a technique based upon diffusion of the staining agent into accessible regions of the polymer.When a crystallizable polymer - such as nylon 6 - is cooled from the melt, lamellae form by chainfolding of the crystallizing long chain macromolecules. The regions between adjacent lamellae represent the less ordered amorphous domains into which stain can diffuse. In this process the lamellae will be “outlined” by the dense stain, giving rise to contrast comparable to that obtained by “negative” staining techniques.If the cooling of the polymer melt proceeds relatively slowly - as in molding operations - the lamellae are usually arranged in a radial manner. This morphology is referred to as spherulitic.

Download Full-text

A theory of contamination in electron microscopes by surface diffusion

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107721 ◽

1978 ◽

Vol 36 (1) ◽

pp. 116-117

Author(s):

J.T. Fourie

Keyword(s):

Electron Beam ◽

Surface Diffusion ◽

High Vacuum ◽

Ultra High Vacuum ◽

Physical Parameters ◽

Carbon Compounds ◽

Hydrocarbon Molecules ◽

Electron Microscopes ◽

Primary Electrons ◽

Long Chain

Contamination in electron microscopes can be a serious problem in STEM or in situations where a number of high resolution micrographs are required of the same area in TEM. In modern instruments the environment around the specimen can be made free of the hydrocarbon molecules, which are responsible for contamination, by means of either ultra-high vacuum or cryo-pumping techniques. However, these techniques are not effective against hydrocarbon molecules adsorbed on the specimen surface before or during its introduction into the microscope. The present paper is concerned with a theory of how certain physical parameters can influence the surface diffusion of these adsorbed molecules into the electron beam where they are deposited in the form of long chain carbon compounds by interaction with the primary electrons.

Download Full-text

Phase behavior of cationic and anionic surfactants at low concentrations

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100123878 ◽

1992 ◽

Vol 50 (1) ◽

pp. 694-695

Author(s):

E. Naranjo

Keyword(s):

Phase Behavior ◽

Structural Characterization ◽

Dynamic Systems ◽

Anionic Surfactants ◽

Intermolecular Forces ◽

Stable Form ◽

Surfactant Mixtures ◽

Low Concentrations ◽

Cationic And Anionic Surfactants ◽

General Method

Equilibrium vesicles, those which are the stable form of aggregation and form spontaneously on mixing surfactant with water, have never been demonstrated in single component bilayers and only rarely in lipid or surfactant mixtures. Designing a simple and general method for producing spontaneous and stable vesicles depends on a better understanding of the thermodynamics of aggregation, the interplay of intermolecular forces in surfactants, and an efficient way of doing structural characterization in dynamic systems.

Download Full-text

The effects of low-ratio n-6/n-3 PUFA on biomarkers of inflammation: a systematic review and meta-analysis

Food & Function ◽

10.1039/d0fo01976c ◽

2021 ◽

Author(s):

Yali Wei ◽

Yan Meng ◽

Na Li ◽

Qian Wang ◽

Liyong Chen

Keyword(s):

Systematic Review ◽

Fatty Acid ◽

Polyunsaturated Fatty Acid ◽

Meta Analysis ◽

Chain Polyunsaturated Fatty Acid ◽

Inflammation Markers ◽

Pufa Supplementation ◽

Long Chain

The purpose of the systematic review and meta-analysis was to determine if low-ratio n-6/n-3 long-chain polyunsaturated fatty acid (PUFA) supplementation affects serum inflammation markers based on current studies.

Download Full-text

Biophysics (and sociology) of ceramides.

Biochemical Society Symposium ◽

10.1042/bss0720177 ◽

2005 ◽

Vol 72 ◽

pp. 177-188 ◽

Cited By ~ 28

Author(s):

Félix M. Goñi ◽

F-Xabier Contreras ◽

L-Ruth Montes ◽

Jesús Sot ◽

Alicia Alonso

Keyword(s):

Cell Biology ◽

Positive Curvature ◽

Acyl Chain ◽

Cell Signalling ◽

Hexagonal Structure ◽

Lipid Monolayer ◽

Flip Flop ◽

Long Chain ◽

Bilayer Permeability

In the past decade, the long-neglected ceramides (N-acylsphingosines) have become one of the most attractive lipid molecules in molecular cell biology, because of their involvement in essential structures (stratum corneum) and processes (cell signalling). Most natural ceramides have a long (16-24 C atoms) N-acyl chain, but short N-acyl chain ceramides (two to six C atoms) also exist in Nature, apart from being extensively used in experimentation, because they can be dispersed easily in water. Long-chain ceramides are among the most hydrophobic molecules in Nature, they are totally insoluble in water and they hardly mix with phospholipids in membranes, giving rise to ceramide-enriched domains. In situ enzymic generation, or external addition, of long-chain ceramides in membranes has at least three important effects: (i) the lipid monolayer tendency to adopt a negative curvature, e.g. through a transition to an inverted hexagonal structure, is increased, (ii) bilayer permeability to aqueous solutes is notoriously enhanced, and (iii) transbilayer (flip-flop) lipid motion is promoted. Short-chain ceramides mix much better with phospholipids, promote a positive curvature in lipid monolayers, and their capacities to increase bilayer permeability or transbilayer motion are very low or non-existent.

Download Full-text