On a mathematical description of nonstationary processes in a two-phase coolant flowing along a pipe

1969 ◽  
Vol 27 (3) ◽  
pp. 968-970
Author(s):  
A. V. Bondarenko
Keyword(s):  
Mathematical Description ◽  
Nonstationary Processes ◽  
Two Phase

Features of spatial shock-wave flows in vapor-gas-liquid mixtures

2014 ◽  
Vol 10 ◽  
pp. 27-31
Author(s):  
R.Kh. Bolotnova ◽  
U.O. Agisheva ◽  
V.A. Buzina
Keyword(s):  
Shock Wave ◽  
High Pressure ◽  
Shock Waves ◽  
Liquid Mixture ◽  
Liquid Mixtures ◽  
Pressure Vessels ◽  
Water Mixture ◽  
Two Dimensional ◽  
Nonstationary Processes ◽  
Two Phase

The two-phase model of vapor-gas-liquid medium in axisymmetric two-dimensional formulation, taking into account vaporization is constructed. The nonstationary processes of boiling vapor-water mixture outflow from high-pressure vessels as a result of depressurization are studied. The problems of shock waves action on filled by gas-liquid mixture volumes are solved.

Investigation of two-dimensional nonstationary processes of outflow a gas-saturated liquid from axisymmetric vessels

2012 ◽  
Vol 9 (1) ◽  
pp. 47-52
Author(s):  
R.Kh. Bolotnova ◽  
V.A. Buzina
Keyword(s):  
Comparative Analysis ◽  
Numerical Model ◽  
Liquid Mixture ◽  
Phase Model ◽  
Test Problems ◽  
Two Dimensional ◽  
Nonstationary Processes ◽  
Saturated Liquid ◽  
Two Phase ◽  
One Dimensional

The two-dimensional and two-phase model of the gas-liquid mixture is constructed. The validity of numerical model realization is justified by using a comparative analysis of test problems solution with one-dimensional calculations. The regularities of gas-saturated liquid outflow from axisymmetric vessels for different geometries are established.

Two-phase flows in porous media: Prediction of pressure drops using a diffuse interface mathematical description

2007 ◽  
Vol 237 (15-17) ◽  
pp. 1887-1898 ◽  
Author(s):  
F. Fichot ◽  
P. Meekunnasombat ◽  
J. Belloni ◽  
F. Duval ◽  
A. Garcia ◽  
...  
Keyword(s):  
Porous Media ◽  
Mathematical Description ◽  
Diffuse Interface ◽  
Two Phase Flows ◽  
Two Phase ◽  
Pressure Drops ◽  
Flows In Porous Media

Mathematical Description of the Control Functions of a Switched Two-Phase Motor with a Two-Sectional Phase Winding

2021 ◽  
pp. 45-55
Author(s):  
Alexander V. KRIVILEV ◽  
◽  
Evgeniy A. DUNICH ◽  
Keyword(s):  
Electric Drive ◽  
Mathematical Description ◽  
High Speed ◽  
Control Device ◽  
Digital Signals ◽  
Two Phase ◽  
Control Functions ◽  
Mathematical Expressions ◽  
Hall Sensors ◽  
Analytical Expressions

The mathematical description of a digital control device for a modern electric drive based on a switched two-phase motor with two-sectional phase windings is presented. For all possible winding sec-tion connection schemes and their basic usage methods involving the application of a four-arm or four-switch power amplifier, the cyclic sequences of control signals are determined and analytical expressions for them are derived that take into account the motor rotor rotation in both directions. Compact versions of representing them in form of Zhegalkin's polynomial or in the disjunctive form are obtained. Analytical dependencies of the rotor position digital signals received from Hall sensors are obtained, and their in-terrelation with the base vectors and number of pole pairs on the rotor magnet is revealed. Combined methods for using the phase winding sections are elaborated, which make it possible to obtain the base vectors uniformly distributed over the rotation circumference with their amplitudes minimally differing from each other. The derived mathematical expressions can be used in designing a digital electric drive and implementing high-speed algorithms based on programmable logic circuits and systems on a chip.

Effect of Shock Loading on the Microstructure of Uniloy 326

1974 ◽  
Vol 32 ◽  
pp. 504-505
Author(s):  
K. P. Staudhammer ◽  
L. E. Murr
Keyword(s):  
Grain Size ◽  
Shock Loading ◽  
Current Investigation ◽  
Two Phase ◽  
05 C ◽  
Shock Deformation ◽  
Heat Treated

The effect of shock loading on a variety of steels has been reviewed recently by Leslie. It is generally observed that significant changes in microstructure and microhardness are produced by explosive shock deformation. While the effect of shock loading on austenitic, ferritic, martensitic, and pearlitic structures has been investigated, there have been no systematic studies of the shock-loading of microduplex structures.In the current investigation, the shock-loading response of millrolled and heat-treated Uniloy 326 (thickness 60 mil) having a residual grain size of 1 to 2μ before shock loading was studied. Uniloy 326 is a two phase (microduplex) alloy consisting of 30% austenite (γ) in a ferrite (α) matrix; with the composition.3% Ti, 1% Mn, .6% Si,.05% C, 6% Ni, 26% Cr, balance Fe.

Exsolution and inversion in pigeonite from the Whin Sill, Northern England

1978 ◽  
Vol 36 (1) ◽  
pp. 474-475
Author(s):  
P.P.K. Smith
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Homogeneous Nucleation ◽  
Silicate Mineral ◽  
Antiphase Boundaries ◽  
Two Phase ◽  
Primitive Form ◽  
The Core ◽  
Nucleation Mechanisms ◽  
And Inversion

Grains of pigeonite, a calcium-poor silicate mineral of the pyroxene group, from the Whin Sill dolerite have been ion-thinned and examined by TEM. The pigeonite is strongly zoned chemically from the composition Wo8En64FS28 in the core to Wo13En34FS53 at the rim. Two phase transformations have occurred during the cooling of this pigeonite:- exsolution of augite, a more calcic pyroxene, and inversion of the pigeonite from the high- temperature C face-centred form to the low-temperature primitive form, with the formation of antiphase boundaries (APB's). Different sequences of these exsolution and inversion reactions, together with different nucleation mechanisms of the augite, have created three distinct microstructures depending on the position in the grain.In the core of the grains small platelets of augite about 0.02μm thick have farmed parallel to the (001) plane (Fig. 1). These are thought to have exsolved by homogeneous nucleation. Subsequently the inversion of the pigeonite has led to the creation of APB's.

Shock consolidation of Ni-Ti alloy powder

1986 ◽  
Vol 44 ◽  
pp. 430-431
Author(s):  
Naresh N. Thadhani ◽  
Thad Vreeland ◽  
Thomas J. Ahrens
Keyword(s):  
Alloy Powder ◽  
Amorphous Material ◽  
Ti Alloy ◽  
Two Phase ◽  
Near Surface ◽  
Optical Micrograph ◽  
Shock Compaction ◽  
Powder Particles ◽  
Ti Powder ◽  
Rapidly Solidified

A spherically-shaped, microcrystalline Ni-Ti alloy powder having fairly nonhomogeneous particle size distribution and chemical composition was consolidated with shock input energy of 316 kJ/kg. In the process of consolidation, shock energy is preferentially input at particle surfaces, resulting in melting of near-surface material and interparticle welding. The Ni-Ti powder particles were 2-60 μm in diameter (Fig. 1). About 30-40% of the powder particles were Ni-65wt% and balance were Ni-45wt%Ti (estimated by EMPA).Upon shock compaction, the two phase Ni-Ti powder particles were bonded together by the interparticle melt which rapidly solidified, usually to amorphous material. Fig. 2 is an optical micrograph (in plane of shock) of the consolidated Ni-Ti alloy powder, showing the particles with different etching contrast.

A Comparison of Tem and Apfim to the Interpretation of Modulated Microstructures

1985 ◽  
Vol 43 ◽  
pp. 70-71
Author(s):  
M.G. Burke ◽  
M.K. Miller
Keyword(s):  
Low Temperature ◽  
Microstructural Characterization ◽  
Superlattice Reflection ◽  
High Volume ◽  
Atom Probe ◽  
Dark Field ◽  
Miscibility Gap ◽  
Second Phase ◽  
Two Phase ◽  
Probe Field

Interpretation of fine-scale microstructures containing high volume fractions of second phase is complex. In particular, microstructures developed through decomposition within low temperature miscibility gaps may be extremely fine. This paper compares the morphological interpretations of such complex microstructures by the high-resolution techniques of TEM and atom probe field-ion microscopy (APFIM).The Fe-25 at% Be alloy selected for this study was aged within the low temperature miscibility gap to form a <100> aligned two-phase microstructure. This triaxially modulated microstructure is composed of an Fe-rich ferrite phase and a B2-ordered Be-enriched phase. The microstructural characterization through conventional bright-field TEM is inadequate because of the many contributions to image contrast. The ordering reaction which accompanies spinodal decomposition in this alloy permits simplification of the image by the use of the centered dark field technique to image just one phase. A CDF image formed with a B2 superlattice reflection is shown in fig. 1. In this CDF micrograph, the the B2-ordered Be-enriched phase appears as bright regions in the darkly-imaging ferrite. By examining the specimen in a [001] orientation, the <100> nature of the modulations is evident.

Sign in / Sign up

Export Citation Format

Share Document