Spherulitic morphology of the matrix of thermoplastic PEEK/carbon fibre aromatic polymer composites

Abstract The aim of this study was to identify the effect of material type (matrix and reinforcement) and process parameters, on the mechanical properties of 3D Printed long-fibre reinforced polymer composites manufactured using a commercial 3D Printer (Mark Two). The effect of matrix material (Onyx or polyamide), reinforcement type (Carbon, Kevlar®, and HSHT glass), volume of reinforcement, and reinforcement lay-up orientation on both Ultimate Tensile Strength (UTS) and Flexural Modulus were investigated. For Onyx, carbon fibre reinforcement offered the largest increase in both UTS and Flexural Modulus over unreinforced material (1228 ± 19% and 1114 ± 6% respectively). Kevlar® and HSHT also provided improvements but these were less significant. Similarly, for Nylon, the UTS and Flexural Modulus were increased by 1431 ± 56% and 1924 ± 5% by the addition of carbon fibre reinforcement. Statistical analysis indicated that changing the number of layers of reinforcement had the largest impact on both UTS and Flexural Strength, and all parameters were statistically significant.

Download Full-text

Flexed plate impact, part 7. low energy and excess energy impacts on carbon fibre-reinforced polymer composites

Composites ◽

10.1016/0010-4361(88)90237-6 ◽

1988 ◽

Vol 19 (3) ◽

pp. 193-203 ◽

Cited By ~ 27

Author(s):

P.E. Reed ◽

S. Turner

Keyword(s):

Carbon Fibre ◽

Polymer Composites ◽

Excess Energy ◽

Low Energy ◽

Plate Impact ◽

Reinforced Polymer ◽

Carbon Fibre Reinforced Polymer ◽

Fibre Reinforced Polymer

Download Full-text

Thermoplastic aromatic polymer composites

International Materials Reviews ◽

10.1179/imr.1994.39.3.124 ◽

1994 ◽

Vol 39 (3) ◽

pp. 124-124 ◽

Cited By ~ 2

Author(s):

A. G. Gibson

Keyword(s):

Polymer Composites ◽

Aromatic Polymer

Download Full-text

Development of bamboo polymer composites with improved impact resistance

Polymers and Polymer Composites ◽

10.1177/09673911211009369 ◽

2021 ◽

pp. 096739112110093

Author(s):

RM Abhilash ◽

GS Venkatesh ◽

Shakti Singh Chauhan

Keyword(s):

Impact Strength ◽

Flexural Strength ◽

Polymer Composites ◽

Impact Resistance ◽

Adverse Impact ◽

Matrix Polymer ◽

Bamboo Fibre ◽

The Matrix ◽

Major Criterion ◽

Pp Composites

Reinforcing thermoplastic polymers with natural fibres tends to improve tensile and flexural strength but adversely affect elongation and impact strength. This limits the application of such composites where toughness is a major criterion. In the present work, bamboo fibre reinforced polypropylene (PP) composites were prepared with bamboo fibre content varying from 30% to 50% with improved impact resistance. Homopolymer and copolymer PP were used as the matrix polymer and an elastomer was used (10% by wt.) as an additive in the formulation. Copolymer based composites exhibited superior elongation and impact strength as compared to homopolymer based composites. The adverse impact of elastomer on tensile and flexural strength was more pronounced in homopolymer based composites. The study suggested that the properties of the bamboo composites can be tailored to suit different applications by varying reinforcement and elastomer percentage.

Download Full-text

Sequential Laser–Mechanical Drilling of Thick Carbon Fibre Reinforced Polymer Composites (CFRP) for Industrial Applications

Polymers ◽

10.3390/polym13132136 ◽

2021 ◽

Vol 13 (13) ◽

pp. 2136

Author(s):

Sharizal Ahmad Sobri ◽

Robert Heinemann ◽

David Whitehead

Keyword(s):

Carbon Fibre ◽

Polymer Composites ◽

Weight Ratio ◽

High Strength ◽

Industrial Applications ◽

Fibre Laser ◽

Reinforced Polymer ◽

Carbon Fibre Reinforced Polymer ◽

Fibre Reinforced Polymer ◽

Thrust And Torque

Carbon fibre reinforced polymer composites (CFRPs) can be costly to manufacture, but they are typically used anywhere a high strength-to-weight ratio and a high steadiness (rigidity) are needed in many industrial applications, particularly in aerospace. Drilling composites with a laser tends to be a feasible method since one of the composite phases is often in the form of a polymer, and polymers in general have a very high absorption coefficient for infrared radiation. The feasibility of sequential laser–mechanical drilling for a thick CFRP is discussed in this article. A 1 kW fibre laser was chosen as a pre-drilling instrument (or initial stage), and mechanical drilling was the final step. The sequential drilling method dropped the overall thrust and torque by an average of 61%, which greatly increased the productivity and reduced the mechanical stress on the cutting tool while also increasing the lifespan of the bit. The sequential drilling (i.e., laser 8 mm and mechanical 8 mm) for both drill bits (i.e., 2- and 3-flute uncoated tungsten carbide) and the laser pre-drilling techniques has demonstrated the highest delamination factor (SFDSR) ratios. A new laser–mechanical sequence drilling technique is thus established, assessed, and tested when thick CFRP composites are drilled.

Download Full-text