Electrolytic production of hydrogen gas

1939 ◽  
Vol 16 (2) ◽  
pp. 36-39
Author(s):  
Albert H. Steinbrecher
Keyword(s):  
Hydrogen Gas ◽  
Electrolytic Production ◽  
Production Of Hydrogen

scholarly journals A systematic study on electrolytic production of hydrogen gas by using graphite as electrode

2013 ◽  
Vol 17 (1) ◽  
pp. 83-87 ◽  
Author(s):  
A.L. Yuvaraj ◽  
D. Santhanaraj
Keyword(s):  
Systematic Study ◽  
Hydrogen Gas ◽  
Electrolytic Production ◽  
Production Of Hydrogen

scholarly journals Catalytic Activity of Beta-Cyclodextrin-Gold Nanoparticles Network in Hydrogen Evolution Reaction

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 118
Author(s):  
Qui Quach ◽  
Erik Biehler ◽  
Ahmed Elzamzami ◽  
Clay Huff ◽  
Julia M. Long ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Catalytic Activity ◽  
Gold Catalyst ◽  
Hydrogen Gas ◽  
Hydrolysis Reaction ◽  
X Ray Diffraction ◽  
Beta Cyclodextrin ◽  
Transmission Electron ◽  
Production Of Hydrogen ◽  
Climate Crisis

The current climate crisis warrants investigation into alternative fuel sources. The hydrolysis reaction of an aqueous hydride precursor, and the subsequent production of hydrogen gas, prove to be a viable option. A network of beta-cyclodextrin capped gold nanoparticles (BCD-AuNP) was synthesized and subsequently characterized by Powder X-Ray Diffraction (P-XRD), Fourier Transform Infrared (FTIR), Transmission Electron Microscopy (TEM), and Ultraviolet-Visible Spectroscopy (UV-VIS) to confirm the presence of gold nanoparticles as well as their size of approximately 8 nm. The catalytic activity of the nanoparticles was tested in the hydrolysis reaction of sodium borohydride. The gold catalyst performed best at 303 K producing 1.377 mL min−1 mLcat−1 of hydrogen. The activation energy of the catalyst was calculated to be 54.7 kJ/mol. The catalyst resisted degradation in reusability trials, continuing to produce hydrogen gas in up to five trials.

scholarly journals Iridium Complex Catalyzed Hydrogen Production from Glucose and Various Monosaccharides

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 891
Author(s):  
Ken-ichi Fujita ◽  
Takayoshi Inoue ◽  
Toshiki Tanaka ◽  
Jaeyoung Jeong ◽  
Shohichi Furukawa ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Catalytic System ◽  
Catalytic Reaction ◽  
Hydrogen Gas ◽  
Water Soluble ◽  
Starting Material ◽  
Iridium Complex ◽  
Production Of Hydrogen ◽  
Bipyridine Ligand

A new catalytic system has been developed for hydrogen production from various monosaccharides, mainly glucose, as a starting material under reflux conditions in water in the presence of a water-soluble dicationic iridium complex bearing a functional bipyridine ligand. For example, the reaction of D-glucose in water under reflux for 20 h in the presence of [Cp*Ir(6,6′-dihydroxy-2,2′-bipyridine)(H2O)][OTf]2 (1.0 mol %) (Cp*: pentamethylcyclopentadienyl, OTf: trifluoromethanesulfonate) resulted in the production of hydrogen gas in 95% yield. In the present catalytic reaction, it was experimentally suggested that dehydrogenation of the alcoholic moiety at 1-position of glucose proceeded.

scholarly journals Photodeposition of Ag Nanocrystals onto TiO2 Nanotube Platform for Enhanced Water Splitting and Hydrogen Gas Production

2020 ◽  
Vol 2020 ◽  
pp. 1-11 ◽  
Author(s):  
Nur Aimi Jani ◽  
Choonyian Haw ◽  
Weesiong Chiu ◽  
Saadah Abdul Rahman ◽  
Poisim Khiew ◽  
...  
Keyword(s):  
Water Splitting ◽  
Gas Production ◽  
Hydrogen Gas ◽  
Current Work ◽  
Plasmonic Resonance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Production Of Hydrogen ◽  
Production Activity ◽  
Ag Ncs

Current work reports the study of Ag nanocrystals (NCs) decorated doubly anodized (DA) TiO2 nanotubes (NTs) thin film as an efficient photoelectrode material for water splitting and photocatalytic hydrogen gas production. DA process has been shown to be capable of producing less defective NTs and creating additional spacious gaps in between NT bundles to allow efficient and uniform integration of Ag NCs. By employing photoreduction method, Ag NCs can be deposited directly onto NTs, where the size and density of coverage can be maneuvered by merely varying the concentration of Ag precursors. Field emission scanning electron microscope (FESEM) images show that the Ag NCs with controllable size are homogeneously decorated onto the walls of NTs with random yet uniform distribution. X-ray diffraction (XRD) results confirm the formation of anatase TiO2 NTs and Ag NCs, which can be well indexed to standard patterns. The decoration of metallic Ag NCs onto the surface of NTs demonstrates a significant enhancement in the photoconversion efficiency as compared to that of pristine TiO2 NTs. Additionally, the as-prepared nanocomposite film also shows improved efficiency when used as a photocatalyst platform in the production of hydrogen gas. Such improvement in the performance of water splitting and photocatalytic hydrogen gas production activity can be credited to the surface plasmonic resonance of Ag NCs present on the surface of the NTs, which renders improved light absorption and better charge separation. The current work can serve as a model of study for designing more advanced nanoarchitecture photoelectrode for renewable energy application.

scholarly journals Reprocessing of LiH in Molten Chlorides

2008 ◽  
Vol 63 (5-6) ◽  
pp. 377-384
Author(s):  
Patrick J. Masset ◽  
Armand Gabriel ◽  
Jean-Claude Poignet
Keyword(s):  
Process Design ◽  
Diffusion Coefficients ◽  
Electrochemical Techniques ◽  
Hydrogen Gas ◽  
Standard Potential ◽  
Molten Chlorides ◽  
Metallic Lithium ◽  
Production Of Hydrogen ◽  
Current Densities ◽  
Molten Phase

LiH was used as inactive material to stimulate the reprocessing of lithium tritiate in molten chlorides. The electrochemical properties (diffusion coefficients, apparent standard potentials) were measured by means of transient electrochemical techniques (cyclic voltammetry and chronopotentiometry). At 425 ºC the diffusion coefficient and the apparent standard potential were 2.5 · 10−5 cm2 s−1 and −1.8 V vs. Ag/AgCl, respectively. For the process design the LiH solubility was measured by means of DTA to optimize the LiH concentration in the molten phase. In addition electrolysis tests were carried out at 460 ºC with current densities up to 1 A cm−2 over 24 h. These results show that LiH may be reprocessed in molten chlorides consisting in the production of hydrogen gas at the anode and molten metallic lithium at the cathode.

Combustor Development and Engine Demonstration of Micro-Mix Hydrogen Combustion Applied to M1A-17 Gas Turbine

2021 ◽  
Author(s):  
Atsushi Horikawa ◽  
Kunio Okada ◽  
Masato Yamaguchi ◽  
Shigeki Aoki ◽  
Manfred Wirsum ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Electrical Power ◽  
Hydrogen Combustion ◽  
Hydrogen Gas ◽  
Air Pollution Control ◽  
Production Of Hydrogen ◽  
Fuel Staging ◽  
Power Generation Plant ◽  
Electrical Power Output ◽  
Industrial Gas Turbine

Abstract Kawasaki Heavy Industries, LTD. (KHI) has research and development projects for a future hydrogen society. These projects comprise the complete hydrogen cycle, including the production of hydrogen gas, the refinement and liquefaction for transportation and storage, and finally the utilization in a gas turbine for electricity and heat supply. Within the development of the hydrogen gas turbine, the key technology is stable and low NOx hydrogen combustion, namely the Dry Low NOx (DLN) hydrogen combustion. KHI, Aachen University of Applied Science, and B&B-AGEMA have investigated the possibility of low NOx micro-mix hydrogen combustion and its application to an industrial gas turbine combustor. From 2014 to 2018, KHI developed a DLN hydrogen combustor for a 2MW class industrial gas turbine with the micro-mix technology. Thereby, the ignition performance, the flame stability for equivalent rotational speed, and higher load conditions were investigated. NOx emission values were kept about half of the Air Pollution Control Law in Japan: 84ppm (O2-15%). Hereby, the elementary combustor development was completed. From May 2020, KHI started the engine demonstration operation by using an M1A-17 gas turbine with a co-generation system located in the hydrogen-fueled power generation plant in Kobe City, Japan. During the first engine demonstration tests, adjustments of engine starting and load control with fuel staging were investigated. On 21st May, the electrical power output reached 1,635 kW, which corresponds to 100% load (ambient temperature 20 °C), and thereby NOx emissions of 65 ppm (O2-15, 60 RH%) were verified. Here, for the first time, a DLN hydrogen-fueled gas turbine successfully generated power and heat.

scholarly journals Enhanced microbial degradation of irradiated cellulose under hyperalkaline conditions

2020 ◽  
Vol 96 (7) ◽  
Author(s):  
Naji M Bassil ◽  
Joe S Small ◽  
Jonathan R Lloyd
Keyword(s):  
Microbial Degradation ◽  
Degradation Products ◽  
Hydrolysis Product ◽  
Hydrogen Gas ◽  
Cellulose Fibres ◽  
Production Of Hydrogen ◽  
Hydrolysis Of Cellulose ◽  
Alkali Hydrolysis ◽  
Intermediate Level Radioactive Waste ◽  
Hydrolysis Of

ABSTRACT Intermediate-level radioactive waste includes cellulosic materials, which under the hyperalkaline conditions expected in a cementitious geological disposal facility (GDF) will undergo abiotic hydrolysis forming a variety of soluble organic species. Isosaccharinic acid (ISA) is a notable hydrolysis product, being a strong metal complexant that may enhance the transport of radionuclides to the biosphere. This study showed that irradiation with 1 MGy of γ-radiation under hyperalkaline conditions enhanced the rate of ISA production from the alkali hydrolysis of cellulose, indicating that radionuclide mobilisation to the biosphere may occur faster than previously anticipated. However, irradiation also made the cellulose fibres more available for microbial degradation and fermentation of the degradation products, producing acidity that inhibited ISA production via alkali hydrolysis. The production of hydrogen gas as a fermentation product was noted, and this was associated with a substantial increase in the relative abundance of hydrogen-oxidising bacteria. Taken together, these results expand our conceptual understanding of the mechanisms involved in ISA production, accumulation and biodegradation in a biogeochemically active cementitious GDF.

Reactive Molecular Dynamics Simulations, Data Analytics and Visualization

2015 ◽  
Vol 1756 ◽  
Author(s):  
Priya Vashishta ◽  
Rajiv K. Kalia ◽  
Aiichiro Nakano ◽  
Ying Li ◽  
Ken-ichi Nomura ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Hydrogen Production ◽  
Density Functional ◽  
Silica Surface ◽  
Hydrogen Gas ◽  
Divide And Conquer ◽  
List Type ◽  
Reactive Molecular Dynamics ◽  
Production Of Hydrogen ◽  
Blue Gene

ABSTRACTMultimillion-atom reactive molecular dynamics (RMD) and large quantum molecular dynamics (QMD) simulations are used to investigate structural and dynamical correlations under highly nonequilibrium conditions and reactive processes in nanostructured materials under extreme conditions. This paper discusses four simulations:1.RMD simulations of heated aluminum nanoparticles have been performed to study the fast oxidation reaction processes of the core (aluminum)-shell (alumina) nanoparticles and small complexes.2.Cavitation bubbles readily occur in fluids subjected to rapid changes in pressure. We have used billion-atom RMD simulations on a 163,840-processor Blue Gene/P supercomputer to investigate chemical and mechanical damages caused by shock-induced collapse of nanobubbles in water near silica surface. Collapse of an empty nanobubble generates high-speed nanojet, resulting in the formation of a pit on the surface. The gas-filled bubbles undergo partial collapse and consequently the damage on the silica surface is mitigated.3.Our QMD simulation reveals rapid hydrogen production from water by an Al superatom. We have found a low activation-barrier mechanism, in which a pair of Lewis acid and base sites on the Aln surface preferentially catalyzes hydrogen production.4.We have introduced an extension of the divide-and-conquer (DC) algorithmic paradigm called divide-conquer-recombine (DCR) to perform large QMD simulations on massively parallel supercomputers, in which interatomic forces are computed quantum mechanically in the framework of density functional theory (DFT). A benchmark test on an IBM Blue Gene/Q computer exhibits an isogranular parallel efficiency of 0.984 on 786,432 cores for a 50.3 million-atom SiC system. As a test of production runs, LDC-DFT-based QMD simulation involving 16,661 atoms was performed on the Blue Gene/Q to study on-demand production of hydrogen gas from water using LiAl alloy particles.

scholarly journals Photoelectrochemical Water Splitting Reaction System Based on Metal-Organic Halide Perovskites

Materials ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 210 ◽  
Author(s):  
Dohun Kim ◽  
Dong-Kyu Lee ◽  
Seong Min Kim ◽  
Woosung Park ◽  
Uk Sim
Keyword(s):  
Hydrogen Production ◽  
Water Splitting ◽  
Fossil Fuels ◽  
Reaction System ◽  
Hydrogen Gas ◽  
Production Environment ◽  
Organic Halide ◽  
Highly Active ◽  
Production Of Hydrogen ◽  
Metal Organic

In the development of hydrogen-based technology, a key challenge is the sustainable production of hydrogen in terms of energy consumption and environmental aspects. However, existing methods mainly rely on fossil fuels due to their cost efficiency, and as such, it is difficult to be completely independent of carbon-based technology. Electrochemical hydrogen production is essential, since it has shown the successful generation of hydrogen gas of high purity. Similarly, the photoelectrochemical (PEC) method is also appealing, as this method exhibits highly active and stable water splitting with the help of solar energy. In this article, we review recent developments in PEC water splitting, particularly those using metal-organic halide perovskite materials. We discuss the exceptional optical and electrical characteristics which often dictate PEC performance. We further extend our discussion to the material limit of perovskite under a hydrogen production environment, i.e., that PEC reactions often degrade the contact between the electrode and the electrolyte. Finally, we introduce recent improvements in the stability of a perovskite-based PEC device.

Sign in / Sign up

Export Citation Format

Share Document