Structural stability of a feedback system: An operator theoretic approach

2006 ◽  
pp. 78-87
Author(s):  
Ahmed El-Sakkary
Keyword(s):  
Structural Stability ◽  
Feedback System ◽  
Theoretic Approach

Experiments with a scanning tunneling microscope (STM) mounted in a scanning electron microscope (SEM)

1986 ◽  
Vol 44 ◽  
pp. 636-639
Author(s):  
Oliver C. Wells ◽  
Mark E. Welland
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Mechanical Stability ◽  
Tunneling Current ◽  
Feedback System ◽  
Scanning Tunneling ◽  
Surface Profiling ◽  
Close Proximity ◽  
Metal Tip ◽  
Scanning Electron

Scanning tunneling microscopes (STM) exist in two versions. In both of these, a pointed metal tip is scanned in close proximity to the specimen surface by means of three piezos. The distance of the tip from the sample is controlled by a feedback system to give a constant tunneling current between the tip and the sample. In the low-end STM, the system has a mechanical stability and a noise level to give a vertical resolution of between 0.1 nm and 1.0 nm. The atomic resolution STM can show individual atoms on the surface of the specimen.A low-end STM has been put into the specimen chamber of a scanning electron microscope (SEM). The first objective was to investigate technological problems such as surface profiling. The second objective was for exploratory studies. This second objective has already been achieved by showing that the STM can be used to study trapping sites in SiO2.

Time-resolved high-resolution electron microscopy of structural stability in mgo clusters

1996 ◽  
Vol 54 ◽  
pp. 672-673
Author(s):  
T. Kizuka ◽  
N. Tanaka
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Magnesium Oxide ◽  
Structural Stability ◽  
High Resolution Electron Microscopy ◽  
Video Tape ◽  
Solid State Physics ◽  
Time Resolved ◽  
Resolution Electron ◽  
Structural And Functional Properties

Structure and stability of atomic clusters have been studied by time-resolved high-resolution electron microscopy (TRHREM). Typical examples are observations of structural fluctuation in gold (Au) clusters supported on silicon oxide films, graphtized carbon films and magnesium oxide (MgO) films. All the observations have been performed on the clusters consisted of single metal element. Structural stability of ceramics clusters, such as metal-oxide, metal-nitride and metal-carbide clusters, has not been observed by TRHREM although the clusters show anomalous structural and functional properties concerning to solid state physics and materials science.In the present study, the behavior of ceramic, magnesium oxide (MgO) clusters is for the first time observed by TRHREM at 1/60 s time resolution and at atomic resolution down to 0.2 nm.MgO and gold were subsequently deposited on sodium chloride (001) substrates. The specimens, single crystalline MgO films on which Au particles were dispersed were separated in distilled water and observed by using a 200-kV high-resolution electron microscope (JEOL, JEM2010) equipped with a high sensitive TV camera and a video tape recorder system.

STACKING FAULTS, TWINS, AND THE STRUCTURAL STABILITY OF VAN DER WAALS SOLIDS

1974 ◽  
Vol 35 (C7) ◽  
pp. C7-113-C7-119 ◽  
Author(s):  
J. A. VENABLES ◽  
C. A. ENGLISH ◽  
K. F. NIEBEL ◽  
G. J. TATLOCK
Keyword(s):  
Structural Stability ◽  
Van Der Waals ◽  
Stacking Faults

Clinical Renal Function Testing by External Double Isotope Monitoring Technique

1971 ◽  
Vol 10 (01) ◽  
pp. 16-24
Author(s):  
J. Fog Pedersen ◽  
M. Fog Pedersen ◽  
Paul Madsen
Keyword(s):  
Renal Function ◽  
Glomerular Filtration Rate ◽  
Glomerular Filtration ◽  
Plasma Flow ◽  
Filtration Rate ◽  
Renal Plasma Flow ◽  
Correlation Coefficients ◽  
Feedback System ◽  
Effective Renal Plasma Flow ◽  
Advantages And Disadvantages

SummaryAn accurate catheter-free technique for clinical determination simultaneouslyof glomerular filtration rate and effective renal plasma flow by means of radioisotopes has been developed. The renal function is estimated by the amount of radioisotopes necessary to maintain a constant concentration in the patient’s blood. The infusion pumps are steered by a feedback system, the pumps being automatically turned on when the radiation measured over the patient’s head falls below a certain preset level and turned off when this level is again readied. 131I-iodopyracet was used for the estimation of effective renal plasma flow and125I-iothalamate estimation of the glomerular filtration rate. These clearances were compared to the conventional bladder clearances and good correlation was found between these two clearance methods (correlation coefficients 0.97 and.90 respectively). The advantages and disadvantages of this new clearance technique are discussed.

Continuous Estimation of CO2 Production during Exercise

1997 ◽  
Vol 36 (04/05) ◽  
pp. 368-371
Author(s):  
R. Soma ◽  
Y. Yamamoto
Keyword(s):  
Fuzzy Logic ◽  
Steady State ◽  
Infusion Rate ◽  
Feedback System ◽  
Whole Body ◽  
Co2 Production ◽  
Cycle Exercise ◽  
Continuous Estimation ◽  
Breath Measurement ◽  
13Co2 Enrichment

Abstract.A new method was developed for continuous isotopic estimation of human whole body CO2 rate of appearance (Ra) during non-steady state exercise. The technique consisted of a breath-by-breath measurement of 13CO2 enrichment (E) and a real-time fuzzy logic feedback system which controlled NaH13CO3 infusion rate to achieve an isotopic steady state. Ra was estimated from the isotope infusion rate and body 13CO2 enrichment which was equal to E at the isotopic steady state. During a non-steady state incremental cycle exercise (5 w/min or 10 w/min), NaH13CO3 infusion rate was successfully increased by the action of feedback controller so as to keep E constant.

Supercontinuum laser-based monochromatic radiant source for detector spectral responsivity characterization in the range 0.9–1.6 μm using absolute cryogenic radiometer

2020 ◽  
pp. 28-33
Author(s):  
A. Yu. Dunaev ◽  
A. S. Baturin ◽  
V. N. Krutikov ◽  
S. P. Morozova
Keyword(s):  
Power Distribution ◽  
Spectral Power ◽  
Feedback System ◽  
Operating Mode ◽  
Spectral Responsivity ◽  
Spectral Power Distribution ◽  
Cryogenic Radiometer ◽  
Supercontinuum Laser ◽  
Radiant Power ◽  
Double Monochromator

An improved monochromatic radiant source with spectral bandwidth of 4 nm based on supercontinuum laser and a double monochromator was included in absolute cryogenic radiometer-based facility to improve the accuracy of spectral responsivity measurement in the range 0.9–1.6 μm. The developed feedback system ensures stabilization of monochromatic radiant power with standard deviation up to 0.025 %. Radiant power that proceeds detector under test or absolute cryogenic radiometer varies from 0.1 to 1.5 mW in dependence of wavelength. The spectral power distribution of its monochromatic source for various operating mode is presented.

Sign in / Sign up

Export Citation Format

Share Document