scholarly journals 2D holography beyond the Jackiw-Teitelboim model

2021 ◽  
Vol 2021 (9) ◽  
Author(s):  
Florian Ecker ◽  
Carlos Valcárcel ◽  
Dmitri Vassilevich
Keyword(s):  
Asymptotic Behavior ◽  
Variational Problem ◽  
Conformal Transformation ◽  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Gravity Models ◽  
Dilaton Gravity ◽  
Asymptotic Symmetries

Abstract Having in mind extensions of 2D holography beyond the Jackiw-Teitelboim model we propose holographic counterterms and asymptotic conditions for a family of asymptotically AdS2 dilaton gravity models leading to a consistent variational problem and a finite on-shell action. We show the presence of asymptotic Virasoro symmetries in all these models. The Schwarzian action generates (a part) of the equations of motion governing the asymptotic degrees of freedom. We also analyse the applicability of various entropy formulae. By a dilaton-dependent conformal transformation our results are extended to an even larger class of models having exotic asymptotic behavior. We also analyse asymptotic symmetries for some other classes of dilaton gravities without, however, constructing holographic counterterms.

The motion of a lunar orbiter

1966 ◽  
Vol 25 ◽  
pp. 373
Author(s):  
Y. Kozai
Keyword(s):  
Degrees Of Freedom ◽  
Dimensional Space ◽  
Artificial Satellite ◽  
Equations Of Motion ◽  
Triaxial Ellipsoid ◽  
The Moon ◽  
Secular Motion ◽  
The Earth ◽  
Close Satellite ◽  
The Mean

The motion of an artificial satellite around the Moon is much more complicated than that around the Earth, since the shape of the Moon is a triaxial ellipsoid and the effect of the Earth on the motion is very important even for a very close satellite.The differential equations of motion of the satellite are written in canonical form of three degrees of freedom with time depending Hamiltonian. By eliminating short-periodic terms depending on the mean longitude of the satellite and by assuming that the Earth is moving on the lunar equator, however, the equations are reduced to those of two degrees of freedom with an energy integral.Since the mean motion of the Earth around the Moon is more rapid than the secular motion of the argument of pericentre of the satellite by a factor of one order, the terms depending on the longitude of the Earth can be eliminated, and the degree of freedom is reduced to one.Then the motion can be discussed by drawing equi-energy curves in two-dimensional space. According to these figures satellites with high inclination have large possibilities of falling down to the lunar surface even if the initial eccentricities are very small.The principal properties of the motion are not changed even if plausible values ofJ3andJ4of the Moon are included.This paper has been published in Publ. astr. Soc.Japan15, 301, 1963.

The Influence of Loading Position in A Priori High Stress Detection using Mode Superposition

2020 ◽  
Vol 1 (1) ◽  
pp. 93-102
Author(s):  
Carsten Strzalka ◽  
◽  
Manfred Zehn ◽  
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
A Priori ◽  
High Stress ◽  
Von Mises Stress ◽  
Detailed Knowledge ◽  
Variable Loading ◽  
Numerical Effort ◽  
Von Mises

For the analysis of structural components, the finite element method (FEM) has become the most widely applied tool for numerical stress- and subsequent durability analyses. In industrial application advanced FE-models result in high numbers of degrees of freedom, making dynamic analyses time-consuming and expensive. As detailed finite element models are necessary for accurate stress results, the resulting data and connected numerical effort from dynamic stress analysis can be high. For the reduction of that effort, sophisticated methods have been developed to limit numerical calculations and processing of data to only small fractions of the global model. Therefore, detailed knowledge of the position of a component’s highly stressed areas is of great advantage for any present or subsequent analysis steps. In this paper an efficient method for the a priori detection of highly stressed areas of force-excited components is presented, based on modal stress superposition. As the component’s dynamic response and corresponding stress is always a function of its excitation, special attention is paid to the influence of the loading position. Based on the frequency domain solution of the modally decoupled equations of motion, a coefficient for a priori weighted superposition of modal von Mises stress fields is developed and validated on a simply supported cantilever beam structure with variable loading positions. The proposed approach is then applied to a simplified industrial model of a twist beam rear axle.

scholarly journals Asymptotic Behavior of a Viscoelastic Fluid in a Closed Loop Thermosyphon: Physical Derivation, Asymptotic Analysis, and Numerical Experiments

2013 ◽  
Vol 2013 ◽  
pp. 1-20 ◽  
Author(s):  
Justine Yasappan ◽  
Ángela Jiménez-Casas ◽  
Mario Castro
Keyword(s):  
Asymptotic Behavior ◽  
Viscoelastic Fluid ◽  
Closed Loop ◽  
Theoretical Study ◽  
Equations Of Motion ◽  
Asymptotic Properties ◽  
Inertial Manifold ◽  
Thermal Gradients ◽  
External Temperature ◽  
First Time

Fluids subject to thermal gradients produce complex behaviors that arise from the competition with gravitational effects. Although such sort of systems have been widely studied in the literature for simple (Newtonian) fluids, the behavior of viscoelastic fluids has not been explored thus far. We present a theoretical study of the dynamics of a Maxwell viscoelastic fluid in a closed-loop thermosyphon. This sort of fluid presents elastic-like behavior and memory effects. We study the asymptotic properties of the fluid inside the thermosyphon and the exact equations of motion in the inertial manifold that characterizes the asymptotic behavior. We derive, for the first time, the mathematical derivations of the motion of a viscoelastic fluid in the interior of a closed-loop thermosyphon under the effects of natural convection and a given external temperature gradient.

Investigation of Train Dynamics in Passing Through Curves Using a Full Model

Joint Rail ◽  
2004 ◽  
Author(s):  
Mohammad Durali ◽  
Mohammad Mehdi Jalili Bahabadi
Keyword(s):  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Full Model ◽  
Bogie Frame ◽  
Nonlinear Characteristics ◽  
Train Derailment ◽  
Train Dynamics

In this article a train model is developed for studying train derailment in passing through bends. The model is three dimensional, nonlinear, and considers 43 degrees of freedom for each wagon. All nonlinear characteristics of suspension elements as well as flexibilities of wagon body and bogie frame, and the effect of coupler forces are included in the model. The equations of motion for the train are solved numerically for different train conditions. A neural network was constructed as an element in solution loop for determination of wheel-rail contact geometry. Derailment factor was calculated for each case. The results are presented and show the major role of coupler forces on possible train derailment.

Vibration analysis of multiple degrees of freedom mechanical system with dry friction

2012 ◽  
Vol 227 (7) ◽  
pp. 1505-1514 ◽  
Author(s):  
SD Yu ◽  
BC Wen
Keyword(s):  
Mechanical System ◽  
Dry Friction ◽  
Degrees Of Freedom ◽  
Simple Procedure ◽  
Mathematical Problem ◽  
Equations Of Motion ◽  
Inequality Constraints ◽  
Integration Scheme ◽  
Time Step ◽  
Multiple Degrees Of Freedom

This article presents a simple procedure for predicting time-domain vibrational behaviors of a multiple degrees of freedom mechanical system with dry friction. The system equations of motion are discretized by means of the implicit Bozzak–Newmark integration scheme. At each time step, the discontinuous frictional force problem involving both the equality and inequality constraints is successfully reduced to a quadratic mathematical problem or the linear complementary problem with the introduction of non-negative and complementary variable pairs (supremum velocities and slack forces). The so-obtained complementary equations in the complementary pairs can be solved efficiently using the Lemke algorithm. Results for several single degree of freedom and multiple degrees of freedom problems with one-dimensional frictional constraints and the classical Coulomb frictional model are obtained using the proposed procedure and compared with those obtained using other approaches. The proposed procedure is found to be accurate, efficient, and robust in solving non-smooth vibration problems of multiple degrees of freedom systems with dry friction. The proposed procedure can also be applied to systems with two-dimensional frictional constraints and more sophisticated frictional models.

A Hybrid Highly Parallelizable Algorithm for the Dynamics of Rigid Body Chain Systems

1999 ◽  
Author(s):  
Shanzhong Duan ◽  
Kurt S. Anderson
Keyword(s):  
Rigid Body ◽  
Degrees Of Freedom ◽  
High Efficiency ◽  
Equations Of Motion ◽  
Constraint Forces ◽  
Dynamics Of Rigid Body ◽  
A Chain ◽  
Explicit Determination ◽  
Order Algorithm

Abstract The paper presents a new hybrid parallelizable low order algorithm for modeling the dynamic behavior of multi-rigid-body chain systems. The method is based on cutting certain system interbody joints so that largely independent multibody subchain systems are formed. These subchains interact with one another through associated unknown constraint forces f¯c at the cut joints. The increased parallelism is obtainable through cutting the joints and the explicit determination of associated constraint loads combined with a sequential O(n) procedure. In other words, sequential O(n) procedures are performed to form and solve equations of motion within subchains and parallel strategies are used to form and solve constraint equations between subchains in parallel. The algorithm can easily accommodate the available number of processors while maintaining high efficiency. An O[(n+m)Np+m(1+γ)Np+mγlog2Np](0<γ<1) performance will be achieved with Np processors for a chain system with n degrees of freedom and m constraints due to cutting of interbody joints.

TSDT theory for free vibration of functionally graded plates with various material properties

2021 ◽  
Vol 8 (4) ◽  
pp. 691-704
Author(s):  
M. Janane Allah ◽  
◽  
Y. Belaasilia ◽  
A. Timesli ◽  
A. El Haouzi ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Volume Fraction ◽  
Equations Of Motion ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Third Order ◽  
Implicit Algorithm ◽  
Proposed Model ◽  
Graded Material ◽  
Composite Modeling

In this work, an implicit algorithm is used for analyzing the free dynamic behavior of Functionally Graded Material (FGM) plates. The Third order Shear Deformation Theory (TSDT) is used to develop the proposed model. In this contribution, the formulation is written without any homogenization technique as the rule of mixture. The Hamilton principle is used to establish the resulting equations of motion. For spatial discretization based on Finite Element Method (FEM), a quadratic element with four and eight nodes is adopted using seven degrees of freedom per node. An implicit algorithm is used for solving the obtained problem. To study the accuracy and the performance of the proposed approach, we present comparisons with literature and laminate composite modeling results for vibration natural frequencies. Otherwise, we examine the influence of the exponent of the volume fraction which reacts the plates "P-FGM" and "S-FGM". In addition, we study the influence of the thickness on "E-FGM" plates.

ROTATIONS AND VIBRATIONS OF FULLERENES IN THE MOLECULAR COMPLEX C20@C80

2021 ◽  
pp. 35-48
Author(s):  
M.A. Bubenchikov ◽  
◽  
A.M. Bubenchikov ◽  
D.V. Mamontov ◽  
◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Classical Mechanics ◽  
Rotation Frequency ◽  
Dynamic State ◽  
Large Molecules ◽  
Rotational Degrees Of Freedom ◽  
Rotational Motions ◽  
Centers Of Mass ◽  
The Moment

The aim of this work is to apply classical mechanics to a description of the dynamic state of C20@C80 diamond complex. Endohedral rotations of fullerenes are of great interest due to the ability of the materials created on the basis of onion complexes to accumulate energy at rotational degrees of freedom. For such systems, a concept of temperature is not specified. In this paper, a closed description of the rotation of large molecules arranged in diamond shells is obtained in the framework of the classical approach. This description is used for C20@C80 diamond complex. Two different problems of molecular dynamics, distinguished by a fixing method for an outer shell of the considered bimolecular complex, are solved. In all the cases, the fullerene rotation frequency is calculated. Since a class of possible motions for a single carbon body (molecule) consists of rotations and translational displacements, the paper presents the equations determining each of these groups of motions. Dynamic equations for rotational motions of molecules are obtained employing the moment of momentum theorem for relative motions of the system near the fullerenes’ centers of mass. These equations specify the operation of the complex as a molecular pendulum. The equations of motion of the fullerenes’ centers of mass determine vibrations in the system, i.e. the operation of the complex as a molecular oscillator.

scholarly journals VARIATIONAL PROBLEM FOR THE FRENKEL AND THE BARGMANN–MICHEL–TELEGDI (BMT) EQUATIONS

2013 ◽  
Vol 28 (01) ◽  
pp. 1250234 ◽  
Author(s):  
A. A. DERIGLAZOV
Keyword(s):  
Abelian Group ◽  
Variational Problem ◽  
Classical Theory ◽  
Equations Of Motion ◽  
Lagrangian Formulation ◽  
Gauge Invariant ◽  
Local Symmetries

We propose Lagrangian formulation for the particle with value of spin fixed within the classical theory. The Lagrangian is invariant under non-Abelian group of local symmetries. On this reason, all the initial spin variables turn out to be unobservable quantities. As the gauge-invariant variables for description of spin we can take either the Frenkel tensor or the Bargmann–Michel–Telegdi (BMT) vector. Fixation of spin within the classical theory implies O(ℏ)-corrections to the corresponding equations of motion.

Periodic Steady State Response and Fatigue Analysis of a Nonlinear City Bus Model

2009 ◽  
Author(s):  
George Valsamos ◽  
Christos Theodosiou ◽  
Sotirios Natsiavas
Keyword(s):  
Steady State ◽  
Degrees Of Freedom ◽  
Nonlinear Models ◽  
Equations Of Motion ◽  
High Stress ◽  
Direct Determination ◽  
Accurate Information ◽  
Steady State Response ◽  
State Response ◽  
Periodic Steady State

Dynamic response related to fatigue prediction of an urban bus is investigated. First, a quite complete model subjected to road excitation is employed in order to extract sufficiently reliable and accurate information in a fast way. The bus model is set up by applying the finite element method, resulting to an excessive number of degrees of freedom. In addition, the bus suspension units involve nonlinear characterstics. A step towards alleviating this difficulty is the application of an appropriate coordinate transformation, causing a drastic reduction in the dimension of the final set of the equations of motion. This allows the application of a systematic numerical methodology leading to direct determination of periodic steady state response of nonlinear models subjected to periodic excitation. Next, typical results were obtained for excitation resulting from selected urban road profiles. These profiles have either a known form or known statistical properties, expressed by an appropriate spatial power spectral density function. In all cases examined, the emphasis was put on investigating ride response. The main attention was focused on identifying areas of the bus suspension and frame subsystems where high stress levels are developed. This information is based on the idea of a nonlinear transfer function and provides the basis for applying suitable criteria in order to perform analyses leading to prediction of fatigue failure.

Sign in / Sign up

Export Citation Format

Share Document