Inconel®718 superalloy machinability evaluation after laser cladding additive manufacturing process

2018 ◽  
Vol 97 (5-8) ◽  
pp. 2873-2885 ◽  
Author(s):  
Amaia Calleja ◽  
Gorka Urbikain ◽  
Haizea González ◽  
Iker Cerrillo ◽  
Roberto Polvorosa ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Laser Cladding ◽  
Manufacturing Process

scholarly journals Blade Segment with a 3D Lattice of Diamond Grits Fabricated via an Additive Manufacturing Process

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Bin Chen ◽  
Peng Chen ◽  
Yongjun Huang ◽  
Xiangxi Xu ◽  
Yibo Liu ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Service Life ◽  
Manufacturing Process ◽  
Cutting Speed ◽  
Inspection System ◽  
Layer By Layer ◽  
Filling Rate ◽  
Pressure System ◽  
Manufacturing Equipment ◽  
Diamond Blade

Abstract Diamond tools with orderly arrangements of diamond grits have drawn considerable attention in the machining field owing to their outstanding advantages of high sharpness and long service life. This diamond super tool, as well as the manufacturing equipment, has been unavailable to Chinese enterprises for a long time due to patents. In this paper, a diamond blade segment with a 3D lattice of diamond grits was additively manufactured using a new type of cold pressing equipment (AME100). The equipment, designed with a rotary working platform and 16 molding stations, can be used to additively manufacture segments with diamond grits arranged in an orderly fashion, layer by layer; under this additive manufacturing process, at least 216000 pcs of diamond green segments with five orderly arranged grit layers can be produced per month. The microstructure of the segment was observed via SEM and the diamond blade fabricated using these segments was compared to other commercial cutting tools. The experimental results showed that the 3D lattice of diamond grits was formed in the green segment. The filling rate of diamond grits in the lattice could be guaranteed to be above 95%; this is much higher than the 90% filling rate of the automatic array system (ARIX). When used to cut stone, the cutting amount of the blade with segments made by AME100 is two times that of ordinary tools, with the same diamond concentration. When used to dry cut reinforced concrete, its cutting speed is 10% faster than that of ARIX. Under wet cutting conditions, its service life is twice that of ARIX. By applying the machine vision online inspection system and a special needle jig with a negative pressure system, this study developed a piece of additive manufacturing equipment for efficiently fabricating blade segments with a 3D lattice of diamond grits.

An Integrated Model to Simulate Laser Cladding Manufacturing Process for Engine Repair Applications

2010 ◽  
Vol 54 (9-10) ◽  
pp. R298-R307 ◽  
Author(s):  
Yu-Ping Yang ◽  
Sudarsanam S. Babu
Keyword(s):  
Laser Cladding ◽  
Manufacturing Process ◽  
Integrated Model

Evaluation of Parts Produced by a Novel Additive Manufacturing Process

2013 ◽  
Vol 315 ◽  
pp. 63-67 ◽  
Author(s):  
Muhammad Fahad ◽  
Neil Hopkinson
Keyword(s):  
Additive Manufacturing ◽  
Rapid Prototyping ◽  
Manufacturing Process ◽  
High Speed ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Layer By Layer ◽  
Nylon 12 ◽  
Measuring Machine ◽  
End Use

Rapid prototyping refers to building three dimensional parts in a tool-less, layer by layer manner using the CAD geometry of the part. Additive Manufacturing (AM) is the name given to the application of rapid prototyping technologies to produce functional, end use items. Since AM is relatively new area of manufacturing processes, various processes are being developed and analyzed for their performance (mainly speed and accuracy). This paper deals with the design of a new benchmark part to analyze the flatness of parts produced on High Speed Sintering (HSS) which is a novel Additive Manufacturing process and is currently being developed at Loughborough University. The designed benchmark part comprised of various features such as cubes, holes, cylinders, spheres and cones on a flat base and the build material used for these parts was nylon 12 powder. Flatness and curvature of the base of these parts were measured using a coordinate measuring machine (CMM) and the results are discussed in relation to the operating parameters of the process.The result show changes in the flatness of part with the depth of part in the bed which is attributed to the thermal gradient within the build envelope during build.

Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Paul Witherell ◽  
Shaw Feng ◽  
Timothy W. Simpson ◽  
David B. Saint John ◽  
Pan Michaleris ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Metal Powder ◽  
Manufacturing Process ◽  
Process Model ◽  
Model Development ◽  
Process Models ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
Future Work ◽  
Am Processes

In this paper, we advocate for a more harmonized approach to model development for additive manufacturing (AM) processes, through classification and metamodeling that will support AM process model composability, reusability, and integration. We review several types of AM process models and use the direct metal powder bed fusion AM process to provide illustrative examples of the proposed classification and metamodel approach. We describe how a coordinated approach can be used to extend modeling capabilities by promoting model composability. As part of future work, a framework is envisioned to realize a more coherent strategy for model development and deployment.

Optimal space filling for additive manufacturing

2016 ◽  
Vol 22 (4) ◽  
pp. 660-675 ◽  
Author(s):  
Sajan Kapil ◽  
Prathamesh Joshi ◽  
Hari Vithasth Yagani ◽  
Dhirendra Rana ◽  
Pravin Milind Kulkarni ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Layered Manufacturing ◽  
Closed Curve ◽  
Numerical Control ◽  
Surface Finishing ◽  
Content Type ◽  
Single Pass ◽  
Connected Area ◽  
Area Filling

Purpose In additive manufacturing (AM) process, the physical properties of the products made by fractal toolpaths are better as compared to those made by conventional toolpaths. Also, it is desirable to minimize the number of tool retractions. The purpose of this study is to describe three different methods to generate fractal-based computer numerical control (CNC) toolpath for area filling of a closed curve with minimum or zero tool retractions. Design/methodology/approach This work describes three different methods to generate fractal-based CNC toolpath for area filling of a closed curve with minimum or zero tool retractions. In the first method, a large fractal square is placed over the outer boundary and then rest of the unwanted curve is trimmed out. To reduce the number of retractions, ends of the trimmed toolpath are connected in such a way that overlapping within the existing toolpath is avoided. In the second method, the trimming of the fractal is similar to the first method but the ends of trimmed toolpath are connected such that the overlapping is found at the boundaries only. The toolpath in the third method is a combination of fractal and zigzag curves. This toolpath is capable of filling a given connected area in a single pass without any tool retraction and toolpath overlap within a tolerance value equal to stepover of the toolpath. Findings The generated toolpath has several applications in AM and constant Z-height surface finishing. Experiments have been performed to verify the toolpath by depositing material by hybrid layered manufacturing process. Research limitations/implications Third toolpath method is suitable for the hybrid layered manufacturing process only because the toolpath overlapping tolerance may not be enough for other AM processes. Originality/value Development of a CNC toolpath for AM specifically hybrid layered manufacturing which can completely fill any arbitrary connected area in single pass while maintaining a constant stepover.

Sign in / Sign up

Export Citation Format

Share Document