scholarly journals The Dispersion Tensor and Its Unique Minimizer in Hashin–Shtrikman Micro-structures

2018 ◽  
Vol 230 (2) ◽  
pp. 665-700 ◽  
Author(s):  
Loredana Bălilescu ◽  
Carlos Conca ◽  
Tuhin Ghosh ◽  
Jorge San Martín ◽  
Muthusamy Vanninathan
Keyword(s):  
Unique Minimizer ◽  
Dispersion Tensor ◽  
Micro Structures

SEM analysis of fish scale cross sections: A technique study

1992 ◽  
Vol 50 (1) ◽  
pp. 744-745
Author(s):  
M.E. Lee ◽  
A. Moller ◽  
P.S.O. Fouche ◽  
I.G Gaigher
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cross Sections ◽  
Soft Tissues ◽  
Close Association ◽  
Sem Analysis ◽  
Fish Scale ◽  
Fish Scales ◽  
Micro Structures ◽  
Scanning Electron

Scanning electron microscopy of fish scales has facilitated the application of micro-structures to systematics. Electron microscopy studies have added more information on the structure of the scale and the associated cells, many problems still remain unsolved, because of our incomplete knowledge of the process of calcification. One of the main purposes of these studies has been to study the histology, histochemistry, and ultrastructure of both calcified and decalcified scales, and associated cells, and to obtain more information on the mechanism of calcification in the scales. The study of a calcified scale with the electron microscope is complicated by the difficulty in sectioning this material because of the close association of very hard tissue with very soft tissues. Sections often shatter and blemishes are difficult to avoid. Therefore the aim of this study is firstly to develop techniques for the preparation of cross sections of fish scales for scanning electron microscopy and secondly the application of these techniques for the determination of the structures and calcification of fish scales.

scholarly journals General dispersion properties of magnetized plasmas with drifting bi-Kappa distributions. DIS-K: Dispersion Solver for Kappa Plasmas

2021 ◽  
Vol 87 (3) ◽  
Author(s):  
R.A. López ◽  
S.M. Shaaban ◽  
M. Lazar
Keyword(s):  
Dominant Role ◽  
High Energy ◽  
Distribution Functions ◽  
Magnetized Plasma ◽  
Unstable Wave ◽  
Space Plasmas ◽  
Good Representation ◽  
Particle Interactions ◽  
Particle Collisions ◽  
Dispersion Tensor

Space plasmas are known to be out of (local) thermodynamic equilibrium, as observations show direct or indirect evidences of non-thermal velocity distributions of plasma particles. Prominent are the anisotropies relative to the magnetic field, anisotropic temperatures, field-aligned beams or drifting populations, but also, the suprathermal populations enhancing the high-energy tails of the observed distributions. Drifting bi-Kappa distribution functions can provide a good representation of these features and enable for a kinetic fundamental description of the dispersion and stability of these collision-poor plasmas, where particle–particle collisions are rare but wave–particle interactions appear to play a dominant role in the dynamics. In the present paper we derive the full set of components of the dispersion tensor for magnetized plasma populations modelled by drifting bi-Kappa distributions. A new solver called DIS-K (DIspersion Solver for Kappa plasmas) is proposed to solve numerically the dispersion relations of high complexity. The solver is validated by comparing with the damped and unstable wave solutions obtained with other codes, operating in the limits of drifting Maxwellian and non-drifting Kappa models. These new theoretical tools enable more realistic characterizations, both analytical and numerical, of wave fluctuations and instabilities in complex kinetic configurations measured in-situ in space plasmas.

Records of sea-level highstand over the Meghalayan age/late Holocene from uranium-series ages of beachrock in Weizhou Island, northern South China Sea

The Holocene ◽  
2021 ◽  
pp. 095968362110332
Author(s):  
Tingli Yan ◽  
Kefu Yu ◽  
Rui Wang ◽  
Wenhui Liu ◽  
Leilei Jiang
Keyword(s):  
South China Sea ◽  
Sea Level ◽  
South China ◽  
Intertidal Zone ◽  
Meteoric Water ◽  
Northern South China Sea ◽  
Water Environment ◽  
Sea Levels ◽  
China Sea ◽  
Micro Structures

Beachrock is considered a good archive for past sea-levels because of its unique formation position (intertidal zone). To evaluate sea-level history in the northern South China Sea, three well-preserved beachrock outcrops (Beigang, Gongshanbei, and Hengling) at Weizhou Island, northern South China Sea were selected to examine their relative elevation, sedimentological, mineralogical, and geochemical characteristics. Acropora branches with well-preserved surface micro-structures were selected from the beachrocks and used to determine the ages of these beachrocks via U-series dating. The results show that the beachrocks are composed of coral reef sediments, terrigenous clastics, volcanic clastics, and various calcite cements. These sediments accumulated in the intertidal zone of Weizhou Island were then cemented in a meteoric water environment. The U-series ages of beachrocks from Beigang, Gongshanbei, and Hengling are 1712–768 ca. BP, 1766–1070 ca. BP, and 1493–604 ca. BP (before 1950 AD) respectively. Their elevations are 0.91–1.16 m, 0.95–1.24 m, and 0.82–1.17 m higher than the modern homologous sedimentary zones, respectively. Therefore, we concluded that the sea-level in the Meghalayan age (1766–604 ca. BP) was 0.82–1.24 m higher than the present, and that the sea-level over this period showed a declining trend.

Influence of new surface micro-structures on the performance behaviours of fluid film tilting pad thrust bearings

2021 ◽  
pp. 095440622110309
Author(s):  
JC Atwal ◽  
RK Pandey
Keyword(s):  
Mass Conservation ◽  
Performance Parameters ◽  
Algebraic Equations ◽  
The Finite Element Method ◽  
Thrust Bearings ◽  
Lubrication Equation ◽  
Tilting Pad ◽  
Minimum Film Thickness ◽  
Newton Raphson ◽  
Micro Structures

Performance parameters such as power loss, minimum film thickness, and maximum oil temperature of the sector-shaped tilting pad thrust bearings employing the new micro-structural geometries on pad surfaces have been investigated. The lubrication equation incorporating the mass-conservation issue is discretized using the finite element method and the solution of resulting algebraic equations is obtained employing a Newton-Schur method. The pad equilibrium in the analysis is established using the Newton-Raphson and Braydon methods. The influence of attributes of micro-structures such as depth, circumferential and radial positioning extents have been explored on the performance behaviours. It is found that with the new micro-structured pad surfaces, the performance parameters significantly improved in comparison to conventional plain and conventional rectangular pocketed pads.

scholarly journals Templated interfacial synthesis of metal-organic framework (MOF) nano- and micro-structures with precisely controlled shapes and sizes

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Lingyao Meng ◽  
Binyu Yu ◽  
Yang Qin
Keyword(s):  
Crystal Growth ◽  
Metal Organic Framework ◽  
Reaction Conditions ◽  
Zeolitic Imidazolate Framework ◽  
Crystallographic Preferred Orientation ◽  
Metal Organic ◽  
Interfacial Synthesis ◽  
Oil Water ◽  
Synthesis Methodology ◽  
Micro Structures

AbstractMetal-organic frameworks (MOF) are an emerging class of microporous materials with promising applications. MOF nanocrystals, and their assembled super-structures, can display unique properties and reactivities when compared with their bulk analogues. MOF nanostructures of 0-D, 2-D, and 3-D dimensions can be routinely obtained by controlling reaction conditions and ligand additives, while formation of 1-D MOF nanocrystals (nanowires and nanorods) and super-structures has been relatively rare. We report here a facile templated interfacial synthesis methodology for the preparation of a series of 1-D MOF nano- and micro-structures with precisely controlled shapes and sizes. Specifically, by applying track-etched polycarbonate (PCTE) membranes as the templates and at the oil/water interface, we rapidly and reproducibly synthesize zeolitic imidazolate framework-8 (ZIF-8) and ZIF-67 nano- and micro structures of sizes ranging from 10 nm to 20 μm. We also identify a size confinement effect on MOF crystal growth, which leads to single crystals under the most restricted conditions and inter-grown polycrystals at larger template pore sizes, as well as surface directing effects that influence the crystallographic preferred orientation. Our findings provide a potentially generalizable method for controlling the size, morphology, and crystal orientations of MOF nanomaterials, as well as offering fundamental understanding into MOF crystal growth mechanisms.

A Rapid Fatigue Test Method on Micro Structures for High-Cycle Fatigue

2016 ◽  
Vol 16 (1) ◽  
pp. 61-68 ◽  
Author(s):  
Yi-Chueh Shieh ◽  
Hsuan-Yu Lin ◽  
Wensyang Hsu ◽  
Yu-Hsin Lin
Keyword(s):  
Fatigue Test ◽  
High Cycle Fatigue ◽  
Test Method ◽  
Cycle Fatigue ◽  
Micro Structures

Solid and Hollow Micro and Nano Spherical Structures: in Polysilicon and Phosphosilicate Glass

1994 ◽  
Vol 372 ◽  
Author(s):  
M. M. Farooqui ◽  
A. G. R. Evans
Keyword(s):  
Ion Beam ◽  
Three Dimensional ◽  
Optical Components ◽  
Circular Symmetry ◽  
Spherical Structures ◽  
Phosphosilicate Glass ◽  
Micro Systems ◽  
Micro Structures ◽  
Microfabrication Techniques

Fabrication of three dimensional micro structures in silicon and silicon related materials is becoming increasingly important for the realisation of micro systems comprising of sensors, actuators, transducers and analytical assemblies. Fabrication of such devices so far has been mostly in form of structures defined by the crystal planes of silicon, or has involved sophisticated technologies such as ion beam machining, replication using LIGA, or micromachining techniques involving a sequence of alignment and etch stages using binary masks. Structures with circular symmetry are of great interest as micro optical components amongst others, and these are not easily amenable to microfabrication techniques commonly employed.

Sign in / Sign up

Export Citation Format

Share Document