Determination of hammerhead ribozyme kinetic constants at high molar ratio ribozyme-substrate

2002 ◽  
Vol 45 (3) ◽  
pp. 261-277 ◽  
Author(s):  
Gabriele Grassi ◽  
Mario Grassi ◽  
Anne Kuhn ◽  
Reinhard Kandolf
Keyword(s):  
Hammerhead Ribozyme ◽  
Kinetic Constants ◽  
Molar Ratio ◽  
High Molar Ratio

KINETIC CONSTANTS DETERMINATION OF PETROLEUM REFINERY EFFLUENT TREATMENT IN A UASB REACTOR USING RSM

2017 ◽  
Vol 16 (1) ◽  
pp. 121-130 ◽  
Author(s):  
Seyyed Mohammad Mousavi ◽  
Seyed Omid Rastegar ◽  
Seyed Abbas Shojaosadati ◽  
Soheila Sheibani
Keyword(s):  
Petroleum Refinery ◽  
Kinetic Constants ◽  
Effluent Treatment ◽  
Uasb Reactor ◽  
Refinery Effluent ◽  
Petroleum Refinery Effluent

scholarly journals Charge Transfer Complexes of Ketotifen with 2,3-Dichloro-5,6-dicyano-p-benzoquinone and 7,7,8,8-Tetracyanoquodimethane: Spectroscopic Characterization Studies

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 2039
Author(s):  
Gamal A. E. Mostafa ◽  
Ahmed Bakheit ◽  
Najla AlMasoud ◽  
Haitham AlRabiah
Keyword(s):  
Charge Transfer ◽  
Spectroscopic Characterization ◽  
Molar Ratio ◽  
Charge Transfer Complexes ◽  
Physical Parameters ◽  
Spectrophotometric Methods ◽  
Theoretical Approaches ◽  
The Stability ◽  
Ct Complexes

The reactions of ketotifen fumarate (KT) with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π acceptors to form charge transfer (CT) complexes were evaluated in this study. Experimental and theoretical approaches, including density function theory (DFT), were used to obtain the comprehensive, reliable, and accurate structure elucidation of the developed CT complexes. The CT complexes (KT-DDQ and KT-TCNQ) were monitored at 485 and 843 nm, respectively, and the calibration curve ranged from 10 to 100 ppm for KT-DDQ and 2.5 to 40 ppm for KT-TCNQ. The spectrophotometric methods were validated for the determination of KT, and the stability of the CT complexes was assessed by studying the corresponding spectroscopic physical parameters. The molar ratio of KT:DDQ and KT:TCNQ was estimated at 1:1 using Job’s method, which was compatible with the results obtained using the Benesi–Hildebrand equation. Using these complexes, the quantitative determination of KT in its dosage form was successful.

scholarly journals Simulation of extracellular nucleotide hydrolysis and determination of kinetic constants for the ectonucleotidases.

1986 ◽  
Vol 261 (33) ◽  
pp. 15505-15507
Author(s):  
L L Slakey ◽  
K Cosimini ◽  
J P Earls ◽  
C Thomas ◽  
E L Gordon
Keyword(s):  
Kinetic Constants ◽  
Extracellular Nucleotide ◽  
Nucleotide Hydrolysis

scholarly journals Reaktive E=C(p–p)π Systeme, XXXIV Addition von Alkoholen oder primären Aminen an Phosphaalkene F3CP=C(F)OR. Neue Trifluormethylphosphane und -phosphaalkene/Reactive E = C( p – p ) π-Systems, XXXIV Addition of Alcohols or Primary Amines to Phosphaalkenes F3CP= C(F)OR . Novel Trifluoromethylphosphanes and Phosphaalkenes

1993 ◽  
Vol 48 (1) ◽  
pp. 58-67 ◽  
Author(s):  
Joseph Grobe ◽  
Duc Le Van ◽  
Gudrun Lange
Keyword(s):  
High Resolution Mass Spectrometry ◽  
Molar Ratio ◽  
Primary Amines ◽  
The Novel ◽  
Experimental Conditions ◽  
Pull System ◽  
Fragment Ions ◽  
New Compounds ◽  
C Nmr

The course of the reactions o f fluorophosphaalkenes F3CP = C (F)OR [R = Me (1), Et (2)] with methanol or ethanol strongly depends on the experimental conditions. Thus at 70 °C a mixture of the 2-phosphapropionic acid ester F3CP (H )CO2R [R = Me (3), Et (4)] and trifluoromethylphosphane H2PCF3 is formed [molar ratio: 3 or 4 /H2 CF3 ≈1/1]. If the precursors F3CP (H )CO2R [R = Me (3), Et) are used as starting materials, the reaction with ROH under the same conditions affords 3 and 4, respectively, (90 to 95% yield) with only traces of H2PCF 3. In the presence o f iPr2NH these precursors react with R′OH to give the novel trifluoromethylphosphaalkenes F3CP = C (OR )OR [R /R′: Me/Me (6); E t/E t (7); Me/Et (8)]. With Et2NH , 3 undergoes an addition/elimination process yielding the interesting push/pull system Et2N(F)C = P-CO2Me (5). 1 and 2 react with primary amines R′NH2 (R′= tBu, Me) with stereoselective formation of the fairly labile phosphaalkenes F3CP = C(OR)NHR′ [R /R′: Me/tBu (9), Et/tBu(10), Me/Me (11)] with trans-positions for CF3 and NHR′.The new compounds 3 -11 were characterized by spectroscopic investigations (1H , 19F, 31P, 13C NMR ; IR, MS) and determination of M+ or typical fragment ions [M+ -OR ] by high resolution mass spectrometry.

scholarly journals Experimental determination of intrinsic denitrification kinetic constants

1981 ◽  
Vol 23 (10) ◽  
pp. 2403-2406 ◽  
Author(s):  
Led T. Mulcahy ◽  
Wen K. Shieh ◽  
Enrique J. LaMotta
Keyword(s):  
Experimental Determination ◽  
Kinetic Constants

scholarly journals Determination of the Ratios of Ligands to Metal Ion of some Metal Complexes of Triazoles by Using Eleetronie Speetra in Organie Solvents

2004 ◽  
Vol 1 (1) ◽  
pp. 110-115
Author(s):  
Baghdad Science Journal
Keyword(s):  
Solid State ◽  
Metal Complexes ◽  
Electronic Spectra ◽  
Metal Ion ◽  
The Other ◽  
Molar Ratio ◽  
Other Hand

We found that 4,5- diphenyl- 3(2- propynyl) thio- 1??-triazole [1? forms a complex with Pd (11) ion of ratio 1:1 which absorbs light in CH2CI2 at 400 nm, and 4,5- diphenyl- 3(2- propenyl) thio- 1,2,4- triazole [II] forms complexes with Pd (II) ion of ratio 1:1 which absorbs light at 390 nm, and of ratio 2:1 which absorbs light at 435 nm. On the other hand, we found that the new derivative 4- phenyl- 5( p- amino phenyl) -3- mercapto- 1,2,4- triazole ?111? forms complexes with Cu (II) ion of the ratio 1:1 which absorbs light at 380 nm, with Ni (II) ion of the ratio 3:1 which absorbs light at 358 nm; and with Co (11) ion of the ratio 3.2:1 which absorbs light at 588 nm. The ratio of the complexes were determined by measuring the electronic spectra of the complexes in CH2G2 and (CH^NCHO at different concentrations ofthe ligands and f?xed ' •' of the metal ion in every case, then applying the molar ratio plots on the data. Our results were confirmed by precipitating most ofthe above complexes in solid state, and then each complex was analyzed elementally.

scholarly journals Manganese carbonate-zinc glycerolate, synthesis, characterization and application as catalyst for transesterification of soybean oil

2016 ◽  
Vol 22 (4) ◽  
pp. 431-443
Author(s):  
Xiaochan Zhu ◽  
Hui Liu ◽  
Dejan Skala
Keyword(s):  
Soybean Oil ◽  
Solid Phase ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Mixed System ◽  
Solid Catalyst ◽  
Manganese Carbonate ◽  
Gravimetric Analysis ◽  
Working Parameters

In this study, mixed system containing manganese carbonate (MnCO3) and zinc glycerolate (ZnGly) was synthesized, and tested as solid catalyst for transesterification of soybean oil and biodiesel production. The samples of MnCO3/ZnGly before and after usage for transesterification process were characterized using different techniques: determination of basic strength, determination of specific surface area according to Brunauer-Emmett-Teller (BET), measuring the mass change using thermal gravimetric analysis (TGA), investigating the solid phase content and presence of different specific elements and groups by X-Ray diffraction (XRD), the Fourier transform infrared (FT-IR) spectroscopy, the scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS). The effects of different working parameters of transesterification were also investigated: temperature (438-458K), duration of transesterification (0-3.5h), methanol to oil molar ratio (12:1-36:1) and used amounts of catalyst (1-5 mass%). The reusability and stability of MnCO3/ZnGly were analyzed and obtained results showed that MnCO3/ZnGly exhibited a good activity with 100% TG conversion and 81.5% FAME yield with fresh catalyst, and can give 95-100% TG conversion and 62-78% FAME yield after 13 repeated use of same amount of catalyst without regeneration processes. Content of Mn and Zn in biodiesel and glycerol was analyzed by ICP-AAS after each reuse of catalyst.

CATIONIC COPOLYMERIZATION OF ISOBUTYLENE WITH ISOPRENE: KINETICS OF THE PROCESS AND DETERMINATION OF KINETIC CONSTANTS

2015 ◽  
Vol 88 (4) ◽  
pp. 574-583 ◽  
Author(s):  
N. V. Ulitin ◽  
K. A. Tereshchenco ◽  
D. A. Shiyan ◽  
G. E. Zaikov
Keyword(s):  
Experimental Data ◽  
Molecular Weight ◽  
Cationic Polymerization ◽  
Methyl Chloride ◽  
Theoretical Description ◽  
Kinetic Constants ◽  
Molecular Weight Characteristics ◽  
Cationic Copolymerization ◽  
Kinetics Of

ABSTRACT A theoretical description has been developed of the kinetics of isobutylene with isoprene (IIR) cationic polymerization in the environment of methyl chloride on aluminum trichloride as the catalyst. Based on experimental data on the kinetics of copolymerization (isobutylene conversion curve) and the molecular weight characteristics of the copolymer of IIR, kinetic constants for the process were found. Adequacy of the developed theoretical description of the kinetics of the IIR copolymerization process was confirmed by comparing the experimental molecular-weight characteristics calculated by this description, independent characteristics, and IIR unsaturation.

Sign in / Sign up

Export Citation Format

Share Document