Temporal response of nonlinear transmission in optically thick saturable absorbers and determination of saturable absorption parameters

2010 ◽  
Vol 17 (3) ◽  
pp. 331-336
Author(s):  
Shigeki Miyanaga ◽  
Kenji Aihara
2000 ◽  
Vol 09 (04) ◽  
pp. 523-530 ◽  
Author(s):  
P. FENEYROU

We report experimental results on a tin phthalocyanine: the nanosecond transient spectroscopy shows a reverse saturable absorption between 490–530 nm and 550–700 nm and the nonlinear transmission provides a better optical power limiting efficiency from 570 nm to 700 nm compared to C 60. This molecule is then combined in a tandem filter with a multiphoton absorber and a mixture of reverse saturable absorbers to achieve neutral-color broadband protection against ns pulses: the transmitted energy is clamped below 2 μ J throughout the visible.


Nanophotonics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1741-1751
Author(s):  
Young In Jhon ◽  
Jinho Lee ◽  
Young Min Jhon ◽  
Ju Han Lee

Abstract Metallic 2D materials can be promising saturable absorbers for ultrashort pulsed laser production in the long wavelength regime. However, preparing and manipulating their 2D structures without layer stacking have been nontrivial. Using a combined experimental and theoretical approach, we demonstrate here that a metallic titanium carbide (Ti3C2Tx), the most popular MXene 2D material, can have excellent nonlinear saturable absorption properties even in a highly stacked state due to its intrinsically existing surface termination, and thus can produce mode-locked femtosecond pulsed lasers in the 1.9-μm infrared range. Density functional theory calculations reveal that the electronic and optical properties of Ti3C2Tx MXene can be well preserved against significant layer stacking. Indeed, it is experimentally shown that 1.914-μm femtosecond pulsed lasers with a duration of 897 fs are readily generated within a fiber cavity using hundreds-of-layer stacked Ti3C2Tx MXene saturable absorbers, not only being much easier to manufacture than mono- or few-layered ones, but also offering character-conserved tightly-assembled 2D materials for advanced performance. This work strongly suggests that as-obtained highly stacked Ti3C2Tx MXenes can serve as superb material platforms for versatile nanophotonic applications, paving the way toward cost-effective, high-performance photonic devices based on MXenes.


2016 ◽  
Vol 45 (41) ◽  
pp. 16366-16378 ◽  
Author(s):  
Chengzhe Wang ◽  
Levi Lystrom ◽  
Huimin Yin ◽  
Marc Hetu ◽  
Svetlana Kilina ◽  
...  

Tuning the photophysics of cationic Ir(iii) complexes via π-expansive ligands dramatically impacts their applications as broadband reverse saturable absorbers and in photodynamic therapy and theranostics.


2003 ◽  
Vol 07 (06) ◽  
pp. 452-456 ◽  
Author(s):  
Newton M. Barbosa Neto ◽  
Leonardo De Boni ◽  
José J. Rodrigues ◽  
Lino Misoguti ◽  
Cléber R. Mendonça ◽  
...  

Dynamic optical nonlinearities in free base tetrapyridylporphyrin ( H 2 TPyP ) solutions were investigated at 532 nm with the Z-scan technique. We observed a reverse saturable absorption process that was found to have a fast contribution related to the singlet population and a slow accumulative contribution arising from the triplet population. The optical excitations and subsequent relaxations can be interpreted with a five-energy-level diagram that allows determination of the excited states photophysical parameters such as triplet and singlet absorption cross-sections and the intersystem crossing time.


2020 ◽  
Vol 243 ◽  
pp. 14001
Author(s):  
Lei Zhang ◽  
Jiyong Wang ◽  
Aurelien Coillet ◽  
Philippe Grelu ◽  
Benoit Cluzel ◽  
...  

Plasmonic metasurfaces are artificial 2D layers made of subwavelength elementary cells, which give rise to novel wave properties that do not exist in nature. In the linear regime, their applications have been extensively studied, especially in wavefront manipulation for lensing, holography or polarization control. Interests in metasurfaces operating in nonlinear regime have also increased due to their ability to efficiently convert the fundamental light into harmonic frequencies and multiphoton emissions. Nevertheless, practical applications in the nonlinear regime have been rarely reported. In this study, we report that plasmonic metasurfaces with well-controlled polarimetric nonlinear transfer functions perform as saturable absorbers with modulation performances superior to that of other 2D materials. We employ planar nanotechnologies to fabricate 2D plasmonic metasurfaces with precise size, gap and orientation. We quantify the relationship between saturable absorption and the plasmonic resonances of the unit cell by altering the excitation power of pumping laser, the polarization of incident light and the geometrical parameters of the plasmonic metasurfaces. Finally, we provide a practical implementation by integrating the saturable metasurfaces into a fiber laser cavity and realize a stable self-starting ultrashort laser pulse generation. As such, this work sheds light on ultrathin nonlinear saturable absorbers for applications where nonlinear functions are required, such as in ultrafast laser or neuromorphic circuits.


2016 ◽  
Vol 78 (5-9) ◽  
Author(s):  
N. Mohd Sharif ◽  
N. Md. Yusoff ◽  
M. A. Mohd. Izhar ◽  
F. Ahmad ◽  
S. W. Harun ◽  
...  

A Q-switched Thulium-doped Fiber Laser (TDFL) operating at approximately 2 μm wavelength is successfully generated by using four different saturable absorbers (SAs) which are nitrogen-doped graphene in PVA (NG:PVA), nitrogen-doped graphene in PEO (NG:PEO), single-walled carbon nanotube in PVA (SWCNT:PVA), and high pressure carbon monoxide carbon nanotube in PVA (CNTHiPCO:PVA). The SAs integrated in the cavity were able to provide the real saturable absorption in modulating the intra-cavity losses. SWCNT gives the best results with the highest repetition rate and lowest pulse width of 57.45 kHz and 1.958 nJ correspondingly as compared to the other three SAs. 


2018 ◽  
Vol 9 ◽  
pp. 2730-2740 ◽  
Author(s):  
Pavel Loiko ◽  
Tanujjal Bora ◽  
Josep Maria Serres ◽  
Haohai Yu ◽  
Magdalena Aguiló ◽  
...  

Zinc oxide (ZnO) nanorods (NRs) oriented along the crystallographic [001] axis are grown by the hydrothermal method on glass substrates. The ZnO NRs exhibit a broadband (1–2 µm) near-IR absorption ascribed to the singly charged zinc vacancy VZn −1. The saturable absorption of the ZnO NRs is studied at ≈1 µm under picosecond excitation, revealing a low saturation intensity, ≈10 kW/cm2, and high fraction of the saturable losses. The ZnO NRs are applied as saturable absorbers in diode-pumped Yb (≈1.03 µm) and Tm (≈1.94 µm) lasers generating nanosecond pulses. The ZnO NRs grown on various optical surfaces are promising broadband saturable absorbers for nanosecond near-IR lasers in bulk and waveguide geometries.


Sign in / Sign up

Export Citation Format

Share Document