Deformation control method of a large cross-section tunnel overlaid by a soft-plastic loess layer: a case study

2021 ◽  
Author(s):  
Qiuyang Hong ◽  
Hongpeng Lai ◽  
Yuyang Liu ◽  
Xinmin Ma ◽  
Juntai Xie
Keyword(s):  
Cross Section ◽  
Control Method ◽  
Large Cross Section ◽  
Deformation Control

Air exchange dynamics in the system of large cross-section blind roadways

2020 ◽  
Vol 2 ◽  
pp. 46-57
Author(s):  
S.V. Maltsev ◽  
◽  
B.P. Kazakov ◽  
A.G. Isaevich ◽  
M.A. Semin ◽  
...  
Keyword(s):  
Cross Section ◽  
Large Cross Section ◽  
Air Exchange

scholarly journals Designing for People’s Safety on Flooded Streets: Uncertainties and the Influence of the Cross-Section Shape, Roughness and Slopes on Hazard Criteria

Water ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2119
Author(s):  
Luís Mesquita David ◽  
Rita Fernandes de Carvalho
Keyword(s):  
Cross Section ◽  
Overland Flow ◽  
Rectangular Cross Section ◽  
Safety Hazard ◽  
Cross Section Shape ◽  
Section Shape ◽  
Flood Flows ◽  
The Cross ◽  
Flooding Risk

Designing for exceedance events consists in designing a continuous route for overland flow to deal with flows exceeding the sewer system’s capacity and to mitigate flooding risk. A review is carried out here on flood safety/hazard criteria, which generally establish thresholds for the water depth and flood velocity, or a relationship between them. The effects of the cross-section shape, roughness and slope of streets in meeting the criteria are evaluated based on equations, graphical results and one case study. An expedited method for the verification of safety criteria based solely on flow is presented, saving efforts in detailing models and increasing confidence in the results from simplified models. The method is valid for 0.1 m2/s 0.5 m2/s. The results showed that a street with a 1.8% slope, 75 m1/3s−1 and a rectangular cross-section complies with the threshold 0.3 m2/s for twice the flow of a street with the same width but with a conventional cross-section shape. The flow will be four times greater for a 15% street slope. The results also highlighted that the flood flows can vary significantly along the streets depending on the sewers’ roughness and the flow transfers between the major and minor systems, such that the effort detailing a street’s cross-section must be balanced with all of the other sources of uncertainty.

scholarly journals Comprehensive technical support for safe mining in ultra-close coal seams: A case study

2021 ◽  
pp. 014459872110093
Author(s):  
Wei Zhang ◽  
Jiawei Guo ◽  
Kaidi Xie ◽  
Jinming Wang ◽  
Liang Chen ◽  
...  
Keyword(s):  
Coal Seam ◽  
Technical Support ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Deformation Control ◽  
Hard Roof ◽  
Working Face ◽  
Close Coal Seams ◽  
Safe Mining

In order to mine the coal seam under super-thick hard roof, improve the utilization rate of resources and prolong the remaining service life of the mine, a case study of the Gaozhuang Coal Mine in the Zaozhuang Mining Area has been performed in this paper. Based on the specific mining geological conditions of ultra-close coal seams (#3up and #3low coal seams), their joint systematic analysis has been performed, with the focus made in the following three aspects: (i) prevention of rock burst under super-thick hard roof, (ii) deformation control of surrounding rock of roadways in the lower coal seam, and (iii) fire prevention in the goaf of working face. Given the strong bursting tendency observed in upper coal seam and lower coal seam, the technology of preventing rock burst under super-thick hard roof was proposed, which involved setting of narrow section coal pillars to protect roadways and interleaving layout of working faces. The specific supporting scheme of surrounding rock of roadways in the #3low1101 working face was determined, and the grouting reinforcement method of local fractured zones through Marithan was further proposed, to ensure the deformation control of surrounding rock of roadways in lower coal seams. The proposed fire prevention technology envisaged goaf grouting and spraying to plug leaks, which reduced the hazard of spontaneous combustion of residual coals in mined ultra-close coal seams. The technical and economic improvements with a direct economic benefit of 5.55 million yuan were achieved by the application of the proposed comprehensive technical support. The research results obtained provide a theoretical guidance and technical support of safe mining strategies of close coal seams in other mining areas.

scholarly journals Are We Able to Print Components as Strong as Injection Molded?—Comparing the Properties of 3D Printed and Injection Molded Components Made from ABS Thermoplastic

2021 ◽  
Vol 11 (15) ◽  
pp. 6946
Author(s):  
Bartłomiej Podsiadły ◽  
Andrzej Skalski ◽  
Wiktor Rozpiórski ◽  
Marcin Słoma
Keyword(s):  
Tensile Strength ◽  
Injection Molding ◽  
Mechanical Strength ◽  
Cross Section ◽  
Fused Deposition Modeling ◽  
High Strength ◽  
Large Cross Section ◽  
Fused Deposition ◽  
Injection Molded ◽  
The Cross

In this paper, we are focusing on comparing results obtained for polymer elements manufactured with injection molding and additive manufacturing techniques. The analysis was performed for fused deposition modeling (FDM) and single screw injection molding with regards to the standards used in thermoplastics processing technology. We argue that the cross-section structure of the sample obtained via FDM is the key factor in the fabrication of high-strength components and that the dimensions of the samples have a strong influence on the mechanical properties. Large cross-section samples, 4 × 10 mm2, with three perimeter layers and 50% infill, have lower mechanical strength than injection molded reference samples—less than 60% of the strength. However, if we reduce the cross-section dimensions down to 2 × 4 mm2, the samples will be more durable, reaching up to 110% of the tensile strength observed for the injection molded samples. In the case of large cross-section samples, strength increases with the number of contour layers, leading to an increase of up to 97% of the tensile strength value for 11 perimeter layer samples. The mechanical strength of the printed components can also be improved by using lower values of the thickness of the deposited layers.

scholarly journals History, Colonialism, and Archival Methods in Socio-Hydrological Scholarship: A Case Study of the Boerasirie Conservancy in British Guiana

World ◽  
2020 ◽  
Vol 1 (3) ◽  
pp. 205-215
Author(s):  
Joshua Mullenite
Keyword(s):  
Environmental History ◽  
Cross Section ◽  
Science And Technology Studies ◽  
Model Development ◽  
Human Geography ◽  
Hydrological Models ◽  
British Guiana ◽  
Current Role

In this article, I review a cross-section of research in socio-hydrology from across disciplines in order to better understand the current role of historical-archival analysis in the development of socio-hydrological scholarship. I argue that despite its widespread use in environmental history, science and technology studies, anthropology, and human geography, archival methods are currently underutilized in socio-hydrological scholarship more broadly, particularly in the development of socio-hydrological models. Drawing on archival research conducted in relation to the socio-hydrology of coastal Guyana, I demonstrate the ways in which such scholarship can be readily incorporated into model development.

Sign in / Sign up

Export Citation Format

Share Document