Seasonal variations of particle number concentration and its relationship with PM2.5 mass concentration in industrial-residential airshed

Author(s):  
Nadhira Dahari ◽  
Khalida Muda ◽  
Mohd Talib Latif ◽  
Doreena Dominick ◽  
Norelyza Hussein ◽  
...  
2021 ◽  
Vol 21 (22) ◽  
pp. 17185-17223
Author(s):  
Clémence Rose ◽  
Martine Collaud Coen ◽  
Elisabeth Andrews ◽  
Yong Lin ◽  
Isaline Bossert ◽  
...  

Abstract. Aerosol particles are a complex component of the atmospheric system which influence climate directly by interacting with solar radiation, and indirectly by contributing to cloud formation. The variety of their sources, as well as the multiple transformations they may undergo during their transport (including wet and dry deposition), result in significant spatial and temporal variability of their properties. Documenting this variability is essential to provide a proper representation of aerosols and cloud condensation nuclei (CCN) in climate models. Using measurements conducted in 2016 or 2017 at 62 ground-based stations around the world, this study provides the most up-to-date picture of the spatial distribution of particle number concentration (Ntot) and number size distribution (PNSD, from 39 sites). A sensitivity study was first performed to assess the impact of data availability on Ntot's annual and seasonal statistics, as well as on the analysis of its diel cycle. Thresholds of 50 % and 60 % were set at the seasonal and annual scale, respectively, for the study of the corresponding statistics, and a slightly higher coverage (75 %) was required to document the diel cycle. Although some observations are common to a majority of sites, the variety of environments characterizing these stations made it possible to highlight contrasting findings, which, among other factors, seem to be significantly related to the level of anthropogenic influence. The concentrations measured at polar sites are the lowest (∼ 102 cm−3) and show a clear seasonality, which is also visible in the shape of the PNSD, while diel cycles are in general less evident, due notably to the absence of a regular day–night cycle in some seasons. In contrast, the concentrations characteristic of urban environments are the highest (∼ 103–104 cm−3) and do not show pronounced seasonal variations, whereas diel cycles tend to be very regular over the year at these stations. The remaining sites, including mountain and non-urban continental and coastal stations, do not exhibit as obvious common behaviour as polar and urban sites and display, on average, intermediate Ntot (∼ 102–103 cm−3). Particle concentrations measured at mountain sites, however, are generally lower compared to nearby lowland sites, and tend to exhibit somewhat more pronounced seasonal variations as a likely result of the strong impact of the atmospheric boundary layer (ABL) influence in connection with the topography of the sites. ABL dynamics also likely contribute to the diel cycle of Ntot observed at these stations. Based on available PNSD measurements, CCN-sized particles (considered here as either >50 nm or >100 nm) can represent from a few percent to almost all of Ntot, corresponding to seasonal medians on the order of ∼ 10 to 1000 cm−3, with seasonal patterns and a hierarchy of the site types broadly similar to those observed for Ntot. Overall, this work illustrates the importance of in situ measurements, in particular for the study of aerosol physical properties, and thus strongly supports the development of a broad global network of near surface observatories to increase and homogenize the spatial coverage of the measurements, and guarantee as well data availability and quality. The results of this study also provide a valuable, freely available and easy to use support for model comparison and validation, with the ultimate goal of contributing to improvement of the representation of aerosol–cloud interactions in models, and, therefore, of the evaluation of the impact of aerosol particles on climate.


2008 ◽  
Vol 1 (1) ◽  
pp. 435-449
Author(s):  
N. K. Meyer ◽  
A. Lauber ◽  
T. Nussbaumer ◽  
H. Burtscher

Abstract. The efficiency of an electrostatic precipitator (ESP) for reducing wood combustion emissions was investigated. Real-time measurements were conducted by directly reading the change in frequency of the tapered element in a Thermo Scientific 1400a TEOM. The measurements have been shown to be influenced by the charge on the aerosols reaching the tapered element such that the TEOM overestimates mass concentration. This electrostatic effect was cross-checked with particle number concentration measurements where no influence was observed. Placing a radioactive neutraliser prior to the TEOM leads to agreement between observed ESP efficiencies as measured by both the TEOM and a CPC.


2014 ◽  
Vol 14 (6) ◽  
pp. 8419-8454 ◽  
Author(s):  
N. Kivekäs ◽  
A. Massling ◽  
H. Grythe ◽  
R. Lange ◽  
V. Rusnak ◽  
...  

Abstract. Particles in the atmosphere are of concern due to their toxic properties and effects on climate. In coastal areas ship emissions can be a significant anthropogenic source. In this study we investigated the contribution from ship emissions to the total particle number and mass concentrations at a remote location. We studied the particle number concentration (12 to 490 nm in diameter), the mass concentration (12 to 150 nm in diameter) and number and volume size distribution of aerosol particles in ship plumes for a period of four and a half months at Høvsøre, a coastal site on the western coast of Jutland in Denmark. During episodes of western winds the site is about 50 km downwind of a major shipping lane and the plumes are approximately one hour aged when they arrive at the site. We have used a sliding percentile based method for separating the plumes from the measured background values and to calculate the ship plume contribution to the total particle number and PM0.15 mass concentration (mass of particles below 150 nm in diameter, converted from volume assuming sphericity) at the site. The method is not limited to particle number or volume concentration, but can also be used for different chemical species in both particle and gas phase. The total number of analyzed ship plumes was 726, covering on average 19% of the time when air masses were arriving to the site over the shipping lane. During the periods when plumes were present, the particle concentration exceeded the background values on average by 790 cm−3 by number and 0.10 μg m−3 by mass. The corresponding daily average values were 170 cm−3 and 0.023 μg m−3, respectively. This means that the ship plumes contributed between 11 and 19% to the particle number concentration, and between 9 and 18% to PM0.15 during days when air was arriving over the shipping lane. The estimated annual contribution from ship plumes, where all wind directions were included, was in the range of 5–8% in particle number concentration and 4–8% in PM0.15.


2021 ◽  
Author(s):  
Clémence Rose ◽  
Martine Collaud Coen ◽  
Elisabeth Andrews ◽  
Yong Lin ◽  
Isaline Bossert ◽  
...  

Abstract. Aerosol particles are a complex component of the atmospheric system that influences climate directly by interacting with solar radiation, and indirectly by contributing to cloud formation. The variety of their sources, as well as the multiple transformations they may undergo during their transport, result in significant spatial and temporal variability of their properties. Documenting this variability is essential to provide a proper representation of aerosols and cloud condensation nuclei (CCN) in climate models. Using measurements conducted in 2016 or 2017 at 62 ground based stations around the world, this study provides the most up-to-date picture of the spatial distribution of particle number concentration (Ntot) and number size distribution (PNSD, from 39 sites). A sensitivity study was first performed to assess the impact of data availability on Ntot's annual and seasonal statistics, as well as on the analysis of its diel cycle. Thresholds of 50 % and 60 % were set at the seasonal and annual scale, respectively, for the study of the corresponding statistics, and a slightly higher coverage (75 %) was required to document the diel cycle. Although some observations are common to a majority of sites, the variety of environments characterizing these stations made it possible to highlight contrasting findings, which, among other factors, seem to be significantly related to the level of anthropogenic influence. The concentrations measured at polar sites are the lowest (~102 cm−3) and show a clear seasonality, which is also visible in the shape of the PNSD, while diel cycles are in general barely marked, due notably to the absence of a regular day-night cycle in some seasons. In contrast, the concentrations characteristic of urban environments are the highest (~103–104 cm−3) and do not show pronounced seasonal variations, whereas diel cycles tend to be very regular over the year at these stations. The remaining sites, including mountain and non-urban continental and coastal stations, do not exhibit as obvious common behaviour as polar and urban sites and display, on average, intermediate Ntot (~102–103 cm−3). Particle concentrations measured at mountain sites, however, are generally lower compared to nearby lowland sites, and tend to exhibit somewhat more pronounced seasonal variations as a likely result of the strong impact of the atmospheric boundary layer (ABL) influence in connection with the topography of the sites. ABL dynamics also likely contribute to the diel cycle of Ntot observed at these stations. Based on available PNSD measurements, CCN-sized particles (i.e. > 50–100 nm) can represent from a few percent to almost all of Ntot, corresponding to seasonal medians in the order of ~10 to 1000 cm−3, with seasonal patterns and a hierarchy of the site types broadly similar to those observed for Ntot. Overall, this work illustrates the importance of in-situ measurements, in particular for the study of aerosol physical properties, and thus strongly supports the development of a broad global network of near surface observatories to increase and homogenize the spatial coverage of the measurements, and guarantee as well data availability and quality. The results of this study also provide a valuable, freely available and easy to use support for model comparison and validation, with the ultimate goal of contributing to improvement of the representation of aerosol-cloud interactions in models, and, therefore, of the evaluation of the impact of aerosol particles on climate.


2006 ◽  
Vol 6 (12) ◽  
pp. 5495-5513 ◽  
Author(s):  
A. Lauer ◽  
J. Hendricks

Abstract. First results of a multiannual integration with the new global aerosol model system ECHAM4/MADE are presented. This model system enables simulations of the particle number concentration and size-distribution, which is a fundamental innovation compared to previous global model studies considering aerosol mass cycles only. The data calculated by the model provide detailed insights into the properties of the global submicrometer aerosol regarding global burden, chemical composition, atmospheric residence time, particle number concentration and size-distribution. The aerosol components considered by the model are sulfate (SO4), nitrate (NO3), ammonium (NH4), black carbon (BC), organic matter (OM), mineral dust, sea salt and aerosol water. The simulated climatological annual mean global atmospheric burdens (residence times) of the dominant submicrometer aerosol components are 2.25 Tg (4.5 d) for SO4, 0.46 Tg (4.5 d) for NH4, 0.26 Tg (6.6 d) for BC, and 1.77 Tg (6.5 d) for OM. The contributions of individual processes such as emission, nucleation, condensation or dry and wet deposition to the global sources and sinks of specific aerosol components and particle number concentration are quantified. Based on this analysis, the significance of aerosol microphysical processes (nucleation, condensation, coagulation) is evaluated by comparison to the importance of other processes relevant for the submicrometer aerosol on the global scale. The results reveal that aerosol microphysics are essential for the simulation of the particle number concentration and important but not vital for the simulation of particle mass concentration. Hence aerosol microphysics should be taken into account in simulations of atmospheric processes showing a significant dependence on aerosol particle number concentration. The analysis of the vertical variation of the microphysical net production and net depletion rates performed for particle number concentration, sulfate mass and black carbon mass concentration unveils the dominant source and sink regions. Prominent features can be attributed to dominant microphysical processes such as nucleation in the upper troposphere or wet deposition in the lower troposphere. Regions of efficient coagulation can be identified.


2009 ◽  
Vol 2 (1) ◽  
pp. 81-85 ◽  
Author(s):  
N. K. Meyer ◽  
A. Lauber ◽  
T. Nussbaumer ◽  
H. Burtscher

Abstract. The efficiency of an electrostatic precipitator (ESP) for reducing wood combustion emissions was investigated. Real-time measurements were conducted by directly reading the change in frequency of the tapered element in a Thermo Scientific 1400a TEOM. These measurements have been shown to be influenced by the charge on the aerosols reaching the tapered element such that the TEOM overestimates mass concentration. This electrostatic effect was crosschecked with particle mass concentration and particle number concentration measurements where no influence was observed. Placing a radioactive neutraliser prior to the TEOM leads to agreement between observed ESP efficiencies as measured by both the TEOM, mass filters and a CPC.


2019 ◽  
Vol 6 (11) ◽  
pp. 3388-3400 ◽  
Author(s):  
Nathaniel J. Clark ◽  
Robert Clough ◽  
David Boyle ◽  
Richard D. Handy

A strong alkali extraction technique and suitable single particle ICP-MS method is described for the routine quantifying of particle number concentration, particle size and particle mass concentration for silver nanomaterials in fish tissue.


Sign in / Sign up

Export Citation Format

Share Document