Stress state of layered hollow cylinders with irregularly shaped cross-section

2011 ◽  
Vol 47 (6) ◽  
pp. 645-652 ◽  
Author(s):  
Ya. M. Grigorenko ◽  
L. S. Rozhok
Keyword(s):  
Stress State ◽  
Cross Section ◽  
Hollow Cylinders ◽  
Layered Hollow Cylinders ◽  
Shaped Cross Section

scholarly journals Influence of technical parameters on the structure of annular axis braided preforms

2021 ◽  
Vol 28 (1) ◽  
pp. 160-168
Author(s):  
Xi Wang ◽  
Guoli Zhang ◽  
Xiaoping Shi ◽  
Ce Zhang
Keyword(s):  
Cross Section ◽  
Rotation Speed ◽  
Technical Parameters ◽  
Braiding Angle ◽  
Shaped Cross Section

Abstract A modified vertical braiding machine and closed annular axis mandrels with a special-shaped cross section were used to braid annular axis preforms under four different technical parameters. After measuring the braiding angles and yarn spacing of the braided preform in different areas of the mandrels, it was found that the braiding angle increased by 20.9% and the yarn spacing decreased by 19.8% when the speed of the yarn carrier was doubled. The braiding angle decreased by 31.1% and the yarn spacing increased by 28.6% when the rotation speed of the mandrels was doubled. The results show that the rotation speed of the mandrel has a slightly greater influence on the braiding angle and the yarn spacing. By using the modified braiding machine to braid the annular axis preforms, multi-layer continuous braided preforms can be achieved on compact equipment. And the structure of the annular axis braided preforms can be changed by changing the technical parameters.

scholarly journals Design of an Edge Slotted Waveguide Antenna Array Based on T-Shaped Cross-Section Waveguide

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Teng Li ◽  
Wenbin Dou
Keyword(s):  
Surface Wave ◽  
Antenna Array ◽  
Cross Section ◽  
Mutual Coupling ◽  
Dominant Mode ◽  
Waveguide Structure ◽  
Center Frequency ◽  
Sidelobe Level ◽  
Slotted Waveguide ◽  
Shaped Cross Section

An edge slotted waveguide antenna array based on T-shaped cross-section radiating waveguide is proposed. The T-shaped waveguide is analyzed and designed to operate in dominant mode around the center frequency, which has a lower profile compared with the rectangular one. The radiating slots are etched and rotated alternatively on the broadened top plate without cutting into the adjacent walls. The metal fences are inserted between slots to reduce the mutual coupling and surface wave. Therefore, the sidelobe level in E-plane is well suppressed. A 2 × 8 antenna array working at Ka-band is designed and fabricated. The measured results agree well with simulations which demonstrate this novel waveguide structure.

Influence of Curvature on the Stress State of Longitudinally Corrugated Hollow Cylinders

2016 ◽  
Vol 52 (1) ◽  
pp. 49-55 ◽  
Author(s):  
Ya. M. Grigorenko ◽  
L. S. Rozhok
Keyword(s):  
Stress State ◽  
Hollow Cylinders

An analytical model of a curved beam with a T shaped cross section

2018 ◽  
Vol 416 ◽  
pp. 29-54 ◽  
Author(s):  
Andrew J. Hull ◽  
Daniel Perez ◽  
Donald L. Cox
Keyword(s):  
Analytical Model ◽  
Cross Section ◽  
Curved Beam ◽  
Shaped Cross Section

scholarly journals ABOUT THE STRESS STATE ON THE CONTOURS OF UNDERGROUND HORIZONTAL WORKINGS, SUBJECT TO AN OVERALL UNIFORM PRESSURE

2019 ◽  
Vol 7 (1) ◽  
pp. 49-60
Author(s):  
Оксана Богомолова ◽  
Oksana Bogomolova ◽  
Андрей Ушаков ◽  
Andrej Ushakov
Keyword(s):  
Stress State ◽  
Cross Section ◽  
Expansion Coefficient ◽  
Uniform Pressure ◽  
Lateral Expansion ◽  
Underground Workings ◽  
The Cross ◽  
Graphic Images ◽  
The Given ◽  
Distribution Of Stresses

The paper presents the results of a study on the distribution of stresses on the contours of underground workings, the cross section of which has the form of a trapezoid and an ellipse. The distribution of stresses at the points of workings contours is obtained at the given values of uniform pressure and the lateral expansion coefficient of the rock. The graphic images of stress diagrams acting on the contours of the considered workings are given.

scholarly journals Feasibility Study on the Wave-Control Method using Navigation Channel with V-Shaped Cross Section

2007 ◽  
Vol 54 ◽  
pp. 771-775
Author(s):  
Osamu KUNITA ◽  
Masatoshi YUHI ◽  
Junichi YAMAZAKI ◽  
Shinya KOTAKI ◽  
Hajime ISHIDA
Keyword(s):  
Cross Section ◽  
Feasibility Study ◽  
Control Method ◽  
Navigation Channel ◽  
Shaped Cross Section ◽  
Wave Control
Sign in / Sign up

Export Citation Format

Share Document