Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

Spent FCC catalyst is a waste from the petrochemical industry which has excellent pozzolanic properties, containing more than 90% silica and alumina. Its similarity to metakaolin creates interesting prospects for its use in the production of alkali-activated binders. In this study, the alkali activation of this residue, spent FCC catalyst, through mixtures with alkali hydroxide and silicate solutions (both sodium and potassium) has been carried out. The alkali cation had an important role in the nature of AA-FCC pastes: some differences in the mass loss in the thermogravimetric tests and in the X-ray mineral characterization were found. No significant differences in compressive strength were observed for mortars cured for 3 days in several conditions: room temperature and 65oC. Prepared AA-FCC mortars had a compressive strength of about 65-70 MPa. Microstructural studies showed that an amorphous, dense and compact microstructure was obtained, independent of the activating solution and curing condition.

Download Full-text

Spherulitic crystal growth in the prodissoconch larval of Crassostrea virginica

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100076263 ◽

1983 ◽

Vol 41 ◽

pp. 518-519

Author(s):

George G. Cocks ◽

Louis Leibovitz ◽

DoSuk D. Lee

Keyword(s):

Crystal Structure ◽

Crassostrea Virginica ◽

Crystal Orientation ◽

Developmental Changes ◽

Gastrula Stage ◽

Orthorhombic Crystal ◽

Orthorhombic Crystal Structure ◽

Stages Of Growth ◽

Early Stages ◽

Initial Deposition

Our understanding of the structure and the formation of inorganic minerals in the bivalve shells has been considerably advanced by the use of electron microscope. However, very little is known about the ultrastructure of valves in the larval stage of the oysters. The present study examines the developmental changes which occur between the time of conception to the early stages of Dissoconch in the Crassostrea virginica(Gmelin), focusing on the initial deposition of inorganic crystals by the oysters.The spawning was induced by elevating the temperature of the seawater where the adult oysters were conditioned. The eggs and sperm were collected separately, then immediately mixed for the fertilizations to occur. Fertilized animals were kept in the incubator where various stages of development were stopped and observed. The detailed analysis of the early stages of growth showed that CaCO3 crystals(aragonite), with orthorhombic crystal structure, are deposited as early as gastrula stage(Figuresla-b). The next stage in development, the prodissoconch, revealed that the crystal orientation is in the form of spherulites.

Download Full-text

Formation of Dislocation Channels in Neutron Irradiated Molybdenum

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096618 ◽

1972 ◽

Vol 30 ◽

pp. 672-673

Author(s):

S. Mahajan

Keyword(s):

Electron Microscopy ◽

Transmission Electron Microscopy ◽

Ambient Temperature ◽

Room Temperature ◽

Channel Formation ◽

Early Stages ◽

Transmission Electron ◽

Three Stages ◽

Two Stages ◽

Polycrystalline Molybdenum

The evolution of dislocation channels in irradiated metals during deformation can be envisaged to occur in three stages: (i) formation of embryonic cluster free regions, (ii) growth of these regions into microscopically observable channels and (iii) termination of their growth due to the accumulation of dislocation damage. The first two stages are particularly intriguing, and we have attempted to follow the early stages of channel formation in polycrystalline molybdenum, irradiated to 5×1019 n. cm−2 (E > 1 Mev) at the reactor ambient temperature (∼ 60°C), using transmission electron microscopy. The irradiated samples were strained, at room temperature, up to the macroscopic yield point.Figure 1 illustrates the early stages of channel formation. The observations suggest that the cluster free regions, such as A, B and C, form in isolated packets, which could subsequently link-up to evolve a channel.

Download Full-text

An analytical microscopic study of metals in fluidized catalytic cracking catalyst

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100145613 ◽

1986 ◽

Vol 44 ◽

pp. 854-855

Author(s):

Clifford S. Rainey

Keyword(s):

Electron Microscopy ◽

Spatial Distribution ◽

Catalytic Cracking ◽

Catalyst Deactivation ◽

Coke Formation ◽

Acid Sites ◽

Y Zeolite ◽

Fcc Catalyst ◽

Fluidized Catalytic Cracking ◽

High Regeneration

The spatial distribution of V and Ni deposited within fluidized catalytic cracking (FCC) catalyst is studied because these metals contribute to catalyst deactivation. Y zeolite in FCC microspheres are high SiO2 aluminosilicates with molecular-sized channels that contain a mixture of lanthanoids. They must withstand high regeneration temperatures and retain acid sites needed for cracking of hydrocarbons, a process essential for efficient gasoline production. Zeolite in combination with V to form vanadates, or less diffusion in the channels due to coke formation, may deactivate catalyst. Other factors such as metal "skins", microsphere sintering, and attrition may also be involved. SEM of FCC fracture surfaces, AEM of Y zeolite, and electron microscopy of this work are developed to better understand and minimize catalyst deactivation.

Download Full-text