Reutilizing Waste Iron Tailing Powders as Filler in Mortar to Realize Cement Reduction and Strength Enhancement

Recently, the massive accumulation of waste iron tailings powder (WITP) has resulted in significant environmental pollution. To solve this problem, this paper proposes an original mortar replacement (M) method to reuse waste solids and reduce cement consumption. In the experiment, the author employed an M method which replaces water, cement, and sand with WITP under constant water/cement and found that the strength development can be significantly improved. Specifically, a mortar with 20% WITP replacement can obtain a 30.95% improvement in strength development. To study the internal mechanism, we performed experiments such as thermogravimetric analysis (TGA), mercury intrusion porosimetry (MIP), and SEM. The results demonstrate that the nucleation effect and pozzolanic effect of WITP can help promote cement hydration, and MIP reveals that WITP can effectively optimize pore structure. In addition, 1 kg 20% WITP mortar reduced cement consumption by 20%, which saves 19.98% of the economic cost. Comprehensively, our approach achieves the effective utilization of WITP and provides a favorable reference for practical engineering.

The Structural Formation of Cement Stone Modified by a Solution of Superabsorbent Polymer

With the development of 3D technologies in construction, the development of formulations that are indifferent to the influence of the environment is in demand. Conditions of intense water loss from cement systems arise during the layer-by-layer printing process. This leads to a decrease in density, high shrinkage, and a decrease in the strength and durability of the composite. The use of superabsorbent polymer (SAP) solutions, in contrast to granules, will provide hardening Portland cement with a water supply for internal care of hydration processes. The aim of the work is to study the effect of SAP solution on the processes of structure formation of cement stone, hardening in unfavorable conditions. In this paper, the features of the structure formation of cement systems in the presence of SAP are established. It is shown that the use of polymer in an amount of no more than 1.5% by the weight of Portland cement provides the formation of a more perfect crystalline structure of the cement stone, which allows for an increase in the degree of cement hydration. When the amount of SAP is ≥ 1.5% by the weight of Portland cement, a decrease in the intensity of the maxima corresponding to hydration products is observed.

Interactions of Biobased Rheology Modifying Agents with Superplasticizer in Cement Paste

Organic admixtures are an indispensable component of modern concrete. Thus, their purposeful application is not only technically and economically viable but in addition an inevitable tool to make concrete more environmentally friendly. In this context, the use of polysaccharides has increasingly gained interest in the built environment as sustainable resource for performance enhancement. However, due to its origin, biopolymers possess a vast variety of molecular structures which can result in incompatibilities with other polymers present in concrete, such as superplasticizers. The present study highlights effects of the joint application of different types of starches and polycarboxylates with respect to their influence on cement hydration and structural build-up of cement pastes.

Modelling the Relations of Rheological Characteristics with Composition of Plaster Mortar

The rheological properties of fresh plaster mortars, with varied contents of porous fillers and polymer admixtures, have been studied. The quantities of fine limestone and expanded perlite, and dosages of methyl hydroxy ethyl cellulose and ethylene vinyl acetate were varied in the experiment. Effective viscosity (at a shear rate from 0.045 to 5.705 s−1) and the thixotropy of the mixes were determined with rotational viscometer for 18 compositions (according to the design of the experiment). Each of the 18 viscosity curves were described with the Ostwald–de-Waele equation. The Experimental–Statistical models describing the dependencies of the parameters of the rheological model and of mix thixotropy on the composition factors were built on the obtained data. ES-models have allowed the individual and synergetic effects of mix components on the rheological characteristics to be evaluated. The expanded perlite powder can increase the viscosity by two times, probably due to its pozzolanic effect increasing the content of the CSH phase during cement hydration. The thixotropy can be increased by the quantity of limestone. The computational experiments with ES-models have made it possible for the information set, without a noticeable interrelation between rheological characteristics, to be stratified into subsets, in which such interrelations differ significantly.

The Transformation of Green Rusts on the Surface of Portland Cement Hydration Materials

Ordinary Portland cement (OPC) is widely used building material, and its hydration products can be recycling as low-cost absorbents. The loading of iron oxide is helpful to further improve their adsorption performance. In view of the fact that green rusts are frequently occurrence intermediate products in the co-precipitation of iron salt and prone to be oxidized into stable iron minerals. This study simulated co-precipitation to carry out iron-modification on hydration OPC. The results demonstrate that as the carrier materials, hydration OPC behaves excellent affinity with green rusts. Under the conditions of high temperature (70 oC) and high alklinity (pH=11), green rusts mainly transformed into feroxydrate, and a minor part are into magnetite. The enrichment and transformation of green rust can be regarded as an efficient approach for immobilization of iron oxide (oxyhydroxide).