Assessment of the possibility of using comparative in vitro dissolution kinetics (biowaiver) instead of in vivo bioequivalence evaluation for establishing the interchanbeability of generic drugs

2011 ◽  
Vol 45 (2) ◽  
pp. 107-109 ◽  
Author(s):  
I. E. Shokhin ◽  
G. V. Ramenskaya ◽  
G. F. Vasilenko ◽  
E. A. Malalshenko
2018 ◽  
pp. 60-70
Author(s):  
O. E. Schykovskiy ◽  
Т. V. Кrutskikh

The pharmaceutical development of solid dosage forms which containing a poor soluble substance deserves special attention, because a composition and a technology of production such drugs directly effects on release the active pharmaceutical ingredient in the human body and, as a consequence, on pharmacological effectiveness of this drug. The search of therapeutically effective, economically viable and industrially reproducible technology for the production of such drugs is very important for the pharmaceutical industry. The purpose of our work was the pharmaceutical development of the generic drug, which contains a poor soluble in water substance nimodipine. The subject of the research is the substance nimodipine and the samples of tablets obtained with the help of various technological methods from this substance. All analytical and pharmaco-technological researches were implemented according to generally accepted methods that accordance with the requirements of the State Pharmacopoeia of Ukraine. Laboratory batches were developed using technological methods of physical modification of a substance, such as: micronization, sonocrystalllization, solid dispersion by melting, solid dispersion by solvent evaporation, complexation with β-cyclodextrins. Researches of the comparative in vitro dissolution kinetics of substance nimodipin from these laboratory batches made it possible to establish optimal technology for the commercial production of a generic drug. Researches on influence quantity of disintegrant and lubricant in the composition of tablets on the pharmacopoeial parameters of the quality were done. According to the results of the pharmaceutical development, it can be argued that the use of the technological method for production a solid dispersion with the aid of a solvent is most appropriate for the production of tablets of a generic drug with a substance nimodipine, which is confirmed by the results of the comparative in vitro dissolution kinetics in three media and clinical trials. The required quantity of disintegrat (not less than 2.5% per tablet) and lubricant (not less than 0.4% per tablet) in the composition of generic tablets were defined.


2013 ◽  
Vol 49 (2) ◽  
pp. 311-319 ◽  
Author(s):  
André Lima de Oliveira Costa ◽  
Paula Cristina Rezende Enéas ◽  
Tiago Assis Miranda ◽  
Sueli Aparecida Mingoti ◽  
Cristina Duarte Vianna Soares ◽  
...  

Mycophenolate mofetil (MMF) and mycophenolate sodium (MPS) are an ester and a salt of mycophenolic acid. They have different kinetic in vivo characteristics due to differences in molecular structures, physicochemical properties and formulations administered. In this study, dissolution profiles of reference products were tested in different media to evaluate the effect of pH, kinetic dissolution and the best statistical model that can be used to predict the release of both drugs. The drug release was determined by using a validated ultraviolet spectrophotometry method, λ 250 nm. The method showed to be selective, linear, precise and accurate for MMF in 0.1 M HCl and MPS in sodium phosphate buffer pH 6.8. Dissolution kinetics models of zero order, first order, Higuchi, Hixson-Crowell and Weibull were applied to data in order to select the best fit by linear regression. The regression parameters were estimated and the models were evaluated with the results of residuals and coefficient of determination. The residuals obtained from dissolution kinetics models were random, uncorrelated, and normally distributed with constant variance. The R² values (74.7% for MMF and 95.8% for MPS) demonstrated good ability of the Weibull regression to explain the variability and to predict the drugs' release.


2020 ◽  
Vol 10 (5) ◽  
pp. 6513-6521

A biowaiver means that in vivo bioavailability and/or bioequivalence studies may be waived (not considered necessary for product approval). Instead of conducting expensive and time consuming in vivo studies, a dissolution test could be adopted as the surrogate basis for the decision as to whether the two pharmaceutical products are equivalent. The biowaiver approach based on BCS is intended to replace bioequivalence in vivo studies. The aim of the study was to study dissolution kinetics of amlodipine tablets in order to assess their equivalence under conditions in vitro according to the biowaiver. The study of dissolution kinetics of drugs in the form of amlodipine tablets has been carried out in accordance with the requirements of the “biowaiver” procedure, the recommendations of the SPhU and the WHO requirements in order to assess the possibility of replacing the pharmacokinetic studies in vivo by tests in vitro. The possibility to use the recommendations of the "biowaiver" procedure for the registration of generics amlodipine tablets has been found. The studies conducted have shown that amlodipine can be referred to class І of the biopharmaceutical classification system, i.e. substances with a high biopharmaceutical solubility and a high penetration rate. It will allow conducting comparative studies in vitro to confirm the equivalence of drugs. The evaluated amlodipine drugs fulfill biowaiver criteria for drugs containing BCS Class I active pharmaceutical ingredients. Both drugs are “rapidly dissolving,” both meet the criteria of dissolution profile similarity, f2 (i.e., the dissolution profile of the test product is similar to that of the reference product in pH 1.2, 4.5, and 6.8 buffers using the paddle method at 75 rpm), and both are considered to be in vitro equivalent without in vivo evaluation. The proposed chromatographic methods are simple, rapid and accurate for the determination of amlodipine in pharmaceutical dosage forms and can be used for routine quality control of drugs and in vitro dissolution study.


2018 ◽  
Vol 4 (4) ◽  
pp. 523-531
Author(s):  
Hina Mumtaz ◽  
Muhammad Asim Farooq ◽  
Zainab Batool ◽  
Anam Ahsan ◽  
Ashikujaman Syed

The main purpose of development pharmaceutical dosage form is to find out the in vivo and in vitro behavior of dosage form. This challenge is overcome by implementation of in-vivo and in-vitro correlation. Application of this technique is economical and time saving in dosage form development. It shortens the period of development dosage form as well as improves product quality. IVIVC reduce the experimental study on human because IVIVC involves the in vivo relevant media utilization in vitro specifications. The key goal of IVIVC is to serve as alternate for in vivo bioavailability studies and serve as justification for bio waivers. IVIVC follows the specifications and relevant quality control parameters that lead to improvement in pharmaceutical dosage form development in short period of time. Recently in-vivo in-vitro correlation (IVIVC) has found application to predict the pharmacokinetic behaviour of pharmaceutical preparations. It has emerged as a reliable tool to find the mode of absorption of several dosage forms. It is used to correlate the in-vitro dissolution with in vivo pharmacokinetic profile. IVIVC made use to predict the bioavailability of the drug of particular dosage form. IVIVC is satisfactory for the therapeutic release profile specifications of the formulation. IVIVC model has capability to predict plasma drug concentration from in vitro dissolution media.


Author(s):  
Narendar Dudhipala ◽  
Arjun Narala ◽  
Dinesh Suram ◽  
Karthik Yadav Janga

The objective of this present study is to develop a semisolid dispersion (SSD) of zaleplon with the aid of self-emulsifying lipid based amphiphilic carriers (TPGS E or Gelucire 44/14) addressing the poor solubility of this drug. A linear relationship between the solubility of drug with respect to increase in the concentration of lipid surfactant in aqueous medium resulting in AL type phase diagram was observed from phase solubility studies. Fusion method was employed to obtain semisolid dispersions (SSD) of zaleplon which showed high content uniformity of drug. The absence of chemical interactions between the pure drug, excipients and formulations were conferred by Fourier transmission infrared spectroscopic examinations. The photographic images from polarized optical microscopic studies revealed the change in crystalline form of drug to amorphous or molecular state. The superior dissolution parameters of zaleplon from SSD over pure crystalline drug interpreted from in vitro dissolution studies envisage the ability of these lipid surfactants as solubility enhancers. Further, the caliber of TPGS E or Gelucire 44/14 in encouraging the GI absorption of drug was evident with the higher human effective permeability coefficient and fraction oral dose of drug absorbed from SSD in situ intestinal permeation study. In conclusion, in vivo studies in Wister rats demonstrated an improvement in the oral bioavailability of zaleplon from SSD over control pure drug suspension suggesting the competence of Gelucire 44/14 and TPGS E as conscientious carriers to augment the dissolution rate limited bioavailability of this active


Author(s):  
Rupali L. Shid ◽  
Shashikant N. Dhole ◽  
Nilesh Kulkarni ◽  
Santosh L Shid

Poor water solubility and slow dissolution rate are issues for the majority of upcoming and existing biologically active compounds. Simvastatin is poorly water-soluble drug and its bioavailability is very low from its crystalline form. The purpose of this study wasto increase the solubility and dissolution rate of simvastatin by the  preparation of nanosuspension by emulsification solvent diffusion method at laboratory scale. Prepared nanosus-pension was evaluated for its particle size and in vitro dissolution study and characterized by zeta potential,differential scanning calorimetry (DSC) and X-Ray diffractometry (XRD), motic digital microscopy, entrapment efficiency, total drug content, saturated solubility study and in vivo study. A 23 factorial design was employed to study the effect of independent variables, amount of SLS (X1), amount of PVPK-30 (X2) and poloxamer-188 (X3) and dependent variables are total drug content and polydispersity Index. The obtained results showed that particle size (nm) and rate of dissolution has been improved when nanosuspension prepared with the higherconcentration of PVPK-30 with the higher concentration of PVP K-30 and Poloxamer-188 and lower concentration of SLS. The particle size and zeta potential of optimized formulation was found to be 258.3 nm and 23.43. The rate of dissolution of the optimized nanosuspension was enhanced (90% in 60min), relative to plain simvastatin  (21% in 60 min), mainly due to the formation of nanosized particles. These results indicate the suitability of 23 factorial  design for preparation of simvastatin loaded nano-suspension significantly improved in vitro dissolution rate and thus possibly enhance fast onset of therapeutic drug effect. In vivo study shows increase in bioavailability in nanosuspension formulation than the plain simvastatin drug.


Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1210
Author(s):  
Xieguo Yan ◽  
Shiqiang Wang ◽  
Kaoxiang Sun

Schizophrenia, a psychiatric disorder, requires long-term treatment; however, large fluctuations in blood drug concentration increase the risk of adverse reactions. We prepared a long-term risperidone (RIS) implantation system that can stabilize RIS release and established in-vitro and in-vivo evaluation systems. Cumulative release, drug loading, and entrapment efficiency were used as evaluation indicators to evaluate the effects of different pore formers, polymer ratios, porogen concentrations, and oil–water ratios on a RIS implant (RIS-IM). We also built a mathematical model to identify the optimized formulation by stepwise regression. We also assessed the crystalline changes, residual solvents, solubility and stability after sterilization, in-vivo polymer degradation, pharmacokinetics, and tissue inflammation in the case of the optimized formulation. The surface of the optimized RIS microspheres was small and hollow with 134.4 ± 3.5 µm particle size, 1.60 SPAN, 46.7% ± 2.3% implant drug loading, and 93.4% entrapment efficiency. The in-vitro dissolution behavior of RIS-IM had zero-order kinetics and stable blood concentration; no lag time was released for over three months. Furthermore, the RIS-IM was not only non-irritating to tissues but also had good biocompatibility and product stability. Long-acting RIS-IMs with microspheres and film coatings can provide a new avenue for treating schizophrenia.


Author(s):  
Mohsen Hedaya ◽  
Farzana Bandarkar ◽  
Aly Nada

Introduction: The objectives were to prepare, characterize and in vivo evaluate different ibuprofen (IBU) nanosuspensions prepared by ultra-homogenization, after oral administration to rabbits. Methods: The nanosuspensions produced by ultra-homogenization were tested and compared with a marketed IBU suspension for particle size, in vitro dissolution and in vivo absorption. Five groups of rabbits received orally 25 mg/kg of IBU nanosuspension, nanoparticles, unhomogenized suspension, marketed product and untreated suspension. A sixth group received 5 mg/kg IBU intravenously. Serial blood samples were obtained after IBU administration. Results: The formulated nanosuspensions showed significant decrease in particle size. Polyvinyl Pyrrolidone K30 (PP) was found to improve IBU aqueous solubility much better than the other tested polymers. Addition of Tween 80 (TW), in equal amount as PP (IBU: PP:TW, 1:2:2 w/w) resulted in much smaller particle size and better dissolution rate. The Cmax achieved were 14.8±1.64, 11.1±1.37, 9.01±0.761, 7.03±1.38 and 3.23±1.03 μg/ml and the tmax were 36±8.2, 39±8.2, 100±17.3, 112±15 and 105±17 min for the nanosuspension, nanoparticle, unhomogenized suspension, marketed IBU suspension and untreated IBU suspension in water, respectively. Bioavailability of the different formulations relative to the marketed suspension were the highest for nanosuspension> unhomogenized suspension> nanoparticles> untreated IBU suspension. Conclusion: IBU/PP/TW nanosuspensions showed enhanced in vitro dissolution as well as faster rate and higher extent of absorption as indicated from the higher Cmax, shorter tmax and larger AUC. The in vivo data supported the in vitro results. Nanosuspensions prepared by ultra-high-pressure-homogenization technique can be used as a good formulation strategy to enhance the rate and extent of absorption of poorly soluble drugs.


Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 507
Author(s):  
Isabel Gonzalez-Alvarez ◽  
Marival Bermejo ◽  
Yasuhiro Tsume ◽  
Alejandro Ruiz-Picazo ◽  
Marta Gonzalez-Alvarez ◽  
...  

The purpose of this study was to predict in vivo performance of three oral products of Etoricoxib (Arcoxia® as reference and two generic formulations in development) by conducting in vivo predictive dissolution with GIS (Gastro Intestinal Simulator) and computational analysis. Those predictions were compared with the results from previous bioequivalence (BE) human studies. Product dissolution studies were performed using a computer-controlled multicompartmental dissolution device (GIS) equipped with three dissolution chambers, representing stomach, duodenum, and jejunum, with integrated transit times and secretion rates. The measured dissolved amounts were modelled in each compartment with a set of differential equations representing transit, dissolution, and precipitation processes. The observed drug concentration by in vitro dissolution studies were directly convoluted with permeability and disposition parameters from literature to generate the predicted plasma concentrations. The GIS was able to detect the dissolution differences among reference and generic formulations in the gastric chamber where the drug solubility is high (pH 2) while the USP 2 standard dissolution test at pH 2 did not show any difference. Therefore, the current study confirms the importance of multicompartmental dissolution testing for weak bases as observed for other case examples but also the impact of excipients on duodenal and jejunal in vivo behavior.


Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 363
Author(s):  
Claudia Miranda ◽  
Alexis Aceituno ◽  
Mirna Fernández ◽  
Gustavo Mendes ◽  
Yanina Rodríguez ◽  
...  

The biopharmaceutical classification system (BCS) is a very important tool to replace the traditional in vivo bioequivalence studies with in vitro dissolution assays during multisource product development. This paper compares the most recent harmonized guideline for biowaivers based on the biopharmaceutics classification system and the BCS regulatory guidelines in Latin America and analyzes the current BCS regulatory requirements and the perspective of the harmonization in the region to develop safe and effective multisource products. Differences and similarities between the official and publicly available BCS guidelines of several Latin American regulatory authorities and the new ICH harmonization guideline were identified and compared. Only Chile, Brazil, Colombia, and Argentina have a more comprehensive BCS guideline, which includes solubility, permeability, and dissolution requirements. Although their regulatory documents have many similarities with the ICH guidelines, there are still major differences in their interpretation and application. This situation is an obstacle to the successful development of safe and effective multisource products in the Latin American region, not only to improve their access to patients at a reasonable cost, but also to develop BCS biowaiver studies that fulfill the quality standards of regulators in developed and emerging markets.


Sign in / Sign up

Export Citation Format

Share Document