Impact of Foundation Nonlinearity on the Crack Propagation of High Concrete Dams

2014 ◽  
Vol 51 (2) ◽  
pp. 72-82 ◽  
Author(s):  
M. A. Hariri-Ardebili
2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Sha Sha ◽  
Guoxin Zhang

High-pressure hydraulic fracture (HF) is an important part of the safety assessment of high concrete dams. A stress-seepage-damage coupling model based on the finite element method is presented and first applied in HF in concrete dams. The coupling model has the following characteristics: (1) the strain softening behavior of fracture process zone in concrete is considered; (2) the mesh-dependent hardening technique is adopted so that the fracture energy dissipation is not affected by the finite element mesh size; (3) four coupling processes during hydraulic fracture are considered. By the damage model, the crack propagation processes of a 1 : 40 scaled model dam and Koyna dam are simulated. The results are in agreement with experimental and other numerical results, indicating that the damage model can effectively predict the carrying capacity and the crack trajectory of concrete gravity dams. Subsequently, the crack propagation processes of Koyna dam using three notches of different initial lengths are simulated by the damage model and the coupling model. And the influence of HF on the crack propagation path and carrying capacity is studied. The results reveal that HF has a significant influence on the global response of the dam.


1992 ◽  
Vol 19 (3) ◽  
pp. 492-509 ◽  
Author(s):  
Sudip S. Bhattacharjee ◽  
Pierre Léger

The seismic safety of concrete dams is a matter of serious concern around the world. During severe ground motions, the dams are likely to experience cracking due to low tensile resistance of concrete. Several analytical methods have been proposed in the literature for finite element crack propagation analysis of concrete structures. Due to lack of consistent results, and virtually impossible verification because of limited field experience in seismic cracking of concrete dams, the choice of a reliable constitutive model has become a complex task. A review of concrete constitutive models for nonlinear seismic analysis of gravity dams is presented herein. The relative merits of the proposed models have been critically examined. Comparing the theoretical soundness, and the advantages and inconveniences of the different analytical procedures, the nonlinear fracture mechanics model applied with a smeared crack analysis technique appears to be very promising. The present state of knowledge on material fracture parameters under transient conditions has been found to be limited. Review of the past finite element seismic fracture analyses of concrete gravity dams reveals that reliable numerical models for safety evaluation of the structures during severe ground motions have not yet been satisfactorily developed. Key words: gravity dams, constitutive models, fracture mechanics, seismic response, nonlinear analysis, finite element, crack propagation.


2020 ◽  
Vol 21 (6) ◽  
pp. 610
Author(s):  
Xiaoliang Cheng ◽  
Chunyang Zhao ◽  
Hailong Wang ◽  
Yang Wang ◽  
Zhenlong Wang

Microwave cutting glass and ceramics based on thermal controlled fracture method has gained much attention recently for its advantages in lower energy-consumption and higher efficiency than conventional processing method. However, the irregular crack-propagation is problematic in this procedure, which hinders the industrial application of this advanced technology. In this study, the irregular crack-propagation is summarized as the unstable propagation in the initial stage, the deviated propagation in the middle stage, and the non-penetrating propagation in the end segment based on experimental work. Method for predicting the unstable propagation in the initial stage has been developed by combining analytical models with thermal-fracture simulation. Experimental results show good agreement with the prediction results, and the relative deviation between them can be <5% in cutting of some ceramics. The mechanism of deviated propagation and the non-penetrating propagation have been revealed by simulation and theoretical analysis. Since this study provides effective methods to predict unstable crack-propagation in the initial stage and understand the irregular propagation mechanism in the whole crack-propagation stage in microwave cutting ceramics, it is of great significance to the industrial application of thermal controlled fracture method for cutting ceramic materials using microwave.


Sign in / Sign up

Export Citation Format

Share Document