Microstructure and corrosion resistance of modified AZ31 magnesium alloy using microarc oxidation combined with electrophoresis process

2013 ◽  
Vol 28 (3) ◽  
pp. 612-616 ◽  
Author(s):  
Wei Yang ◽  
Ping Wang ◽  
Yongchun Guo ◽  
Bailing Jiang ◽  
Fei Yang ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Microarc Oxidation ◽  
Az31 Magnesium Alloy

Corrosion Behavior of AZ31 Magnesium Alloy with Microarc Oxidation Film Irradiated by High-Intensity Pulsed Ion Beam

2008 ◽  
Vol 373-374 ◽  
pp. 460-463 ◽  
Author(s):  
X.G. Han ◽  
P. Li ◽  
X.P. Zhu ◽  
M.K. Lei
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
High Intensity ◽  
Electrochemical Impedance ◽  
Ion Beam ◽  
Microarc Oxidation ◽  
Az31 Magnesium Alloy ◽  
Noticeable Improvement ◽  
Original Films ◽  
Sealing Layer

The microarc oxidation (MAO) films on AZ31 magnesium alloy were modified by high-intensity pulsed ion beam (HIPIB) at an ion current density of 200 A/cm2 with 1-5 shots. The modified MAO films presented a corrosion resistance superior to that of the original films. Scanning electron microscopy (SEM) observation revealed that a sealing layer was formed on the MAO films by HIPIB irradiation. The corrosion behaviors of the MAO films in 3.5 % NaCl solution were characterized by using electrochemical impedance spectroscopy (EIS). The noticeable improvement in the corrosion resistance of MAO films is attributed to the blocking effect of the sealing layer that hinders the process of electrolyte penetrating the MAO films to the magnesium alloy.

Microstructure and Corrosion Resistance of Microarc Oxidation Coatings on AZ31 Magnesium Alloy Extrusion Profiles

2012 ◽  
Vol 557-559 ◽  
pp. 1993-1997
Author(s):  
Jie Ma ◽  
Yuan Sheng Yang ◽  
Xiu Chun Wang ◽  
Jing Zhang ◽  
Shuo Liu ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Microarc Oxidation ◽  
Corrosion Current ◽  
Spot Test ◽  
Pulse Voltage ◽  
Az31 Magnesium Alloy ◽  
Oxidation Treatment ◽  
Coating Surface ◽  
Structure Surface

Microarc oxidation coatings were prepared on the surface of AZ31 magnesium alloy profiles. Oxidation time of the coatings was between 5min-10min. The phase structure, surface morphology and corrosion resistance of the coatings were investigated using SEM, XRD, copper sulfate spot test and polarization curve test. The results indicate: the main phase compositions of the microarc oxidation coatings are MgO, Mg2SiO4 and MgSiO3; with increasing pulse voltage, the micropore diameter of the coating surface becomes larger, the micropore number reduces and the coating surface roughness increases; the corrosion current density of magnesium alloy reduces significantly after microarc oxidation treatment. The pulse voltage of microarc oxidation should be controlled between 240V-360V to obtain the best corrosion resistance.

Al–AlN composite coatings on AZ31 magnesium alloy for surface hardening and corrosion resistance

Vacuum ◽  
2021 ◽  
pp. 110146
Author(s):  
Wenling Xie ◽  
Yiman Zhao ◽  
Bin Liao ◽  
Pan Pang ◽  
Dongsing Wuu ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Surface Hardening ◽  
Composite Coatings ◽  
Az31 Magnesium Alloy

Phosphate film free of chromate, fluoride and nitrite on AZ31 magnesium alloy and its corrosion resistance

2012 ◽  
Vol 22 (11) ◽  
pp. 2713-2718 ◽  
Author(s):  
Xue-jun CUI ◽  
Chun-hai LIU ◽  
Rui-song YANG ◽  
Ming-tian LI ◽  
Xiu-zhou LIN ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Az31 Magnesium Alloy ◽  
Phosphate Film

scholarly journals Preparation and Characterization of a Sol–Gel AHEC Pore-Sealing Film Prepared on Micro Arc Oxidized AZ31 Magnesium Alloy

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 784
Author(s):  
Longlong Zhang ◽  
Yuanzhi Wu ◽  
Tian Zeng ◽  
Yu Wei ◽  
Guorui Zhang ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Sol Gel ◽  
Oxide Coating ◽  
Az31 Magnesium Alloy ◽  
Hydroxyethyl Cellulose ◽  
Gel Spinning ◽  
Test Analysis ◽  
Pore Sealing ◽  
Micro Arc Oxidation

The purpose of this study was to improve the cellular compatibility and corrosion resistance of AZ31 magnesium alloy and to prepare a biodegradable medical material. An aminated hydroxyethyl cellulose (AHEC) coating was successfully prepared on the surface of a micro-arc oxide +AZ31 magnesium alloy by sol–gel spinning. The pores of the micro-arc oxide coating were sealed. A polarization potential test analysis showed that compared to the single micro-arc oxidation coating, the coating after sealing with AHEC significantly improved the corrosion resistance of the AZ31 magnesium alloy and reduced its degradation rate in simulated body fluid (SBF). The CCK-8 method and cell morphology experiments showed that the AHEC + MAO coating prepared on the AZ31 magnesium alloy had good cytocompatibility and bioactivity.

Sign in / Sign up

Export Citation Format

Share Document