Effects of Si and Al on acicular ferrite formation in C-Mn steel

2001 ◽  
Vol 32 (1) ◽  
pp. 75-83 ◽  
Author(s):  
Jae-Hyeok Shim ◽  
Young Whan Cho ◽  
Jae-Dong Shim ◽  
Young-Joo Oh ◽  
Jung-Soo Byun ◽  
...  
Keyword(s):  
Acicular Ferrite ◽  
Ferrite Formation ◽  
Mn Steel

Effects of Mn and Al on the Intragranular Acicular Ferrite Formation in Rare Earth Treated C–Mn Steel

2017 ◽  
Vol 36 (7) ◽  
pp. 683-691 ◽  
Author(s):  
Mingming Song ◽  
Bo Song ◽  
Zhanbing Yang ◽  
Shenghua Zhang ◽  
Chunlin Hu
Keyword(s):  
Rare Earth ◽  
Acicular Ferrite ◽  
Lattice Misfit ◽  
Ferrite Formation ◽  
Al Content ◽  
Bainite Structure ◽  
Mn Content ◽  
Intragranular Acicular Ferrite ◽  
Upper Bainite ◽  
Mn Steel

AbstractThe influence of Al, Mn and rare earth (RE) on microstructure of C–Mn steel was investigated. The capacities of different RE inclusions to induce intragranular acicular ferrite (AF) formation were compared. Result shows that RE treatment could make C–Mn steel from large amounts of intragranular AF. Al killed is detrimental to the formation of intragranular AF in RE-treated C–Mn steel. An upper bainite structure would replace the AF when Al content increased to 0.027 mass %. The optimal Mn content to form AF is about 0.75–1.31 mass %. The effective RE inclusion which could induce AF nucleation is La2O2S. When patches of MnS are attached on the surface of La2O2S inclusion, AF nucleation capacity of RE-containing inclusion could enlarge obviously. The existence of manganese-depleted zone and low lattice misfit would be the main reason of La-containing inclusion inducing AF nucleation in C–Mn steel.

scholarly journals The Microstructure and Property of the Heat Affected zone in C-Mn Steel Treated by Rare Earth

2019 ◽  
Vol 38 (2019) ◽  
pp. 362-369 ◽  
Author(s):  
Ming-ming Song ◽  
Yu-min Xie ◽  
Bo Song ◽  
Zheng-liang Xue ◽  
Nan Nie ◽  
...  
Keyword(s):  
Rare Earth ◽  
Impact Toughness ◽  
Heat Affected Zone ◽  
Acicular Ferrite ◽  
Steel Matrix ◽  
Impact Properties ◽  
Treated Steel ◽  
The Impact ◽  
Welding Processes ◽  
Mn Steel

AbstractThe microstructures and impact properties of the heat affected zone (HAZ) in steel treated by rare earth (RE) under different welding processes were discussed. The effect of Al on the impact properties of the HAZ in RE treated steel was analyzed. It finds that when the welding t8/5 is smaller than 111 s, the main microstructure in steels is bainite/widmanstatten. The impact toughness of the HAZ is lower than that of the steel matrix. When t8/5 is more than 250 s, the microstructure is mainly acicular ferrite (AF) in the steel treated by RE, and the impact toughness of HAZ is obviously improved. Even under the welding processing with t8/5 about 600 s in RE treated steel can still obtain a lot of AF. While in the steel killed by Al and treated by RE, the main microstructure is parallel cluster of bainite/widmanstatten, and the impact toughness of HAZ is significantly lower than that of low-Al RE treated steel. Al can deteriorate the optimizing of RE treatment on HAZ.

Acicular ferrite formation during isothermal holding in HSLA steel

2015 ◽  
Vol 51 (7) ◽  
pp. 3555-3563 ◽  
Author(s):  
Chenxi Liu ◽  
Lei Shi ◽  
Yongchang Liu ◽  
Chong Li ◽  
Huijun Li ◽  
...  
Keyword(s):  
Acicular Ferrite ◽  
Hsla Steel ◽  
Isothermal Holding ◽  
Ferrite Formation

scholarly journals Acicular ferrite formation in a medium carbon steel with a two stage continuous cooling

1999 ◽  
Vol 41 (3) ◽  
pp. 229-235 ◽  
Author(s):  
I Madariaga ◽  
I Gutiérrez ◽  
C Garcı́a-de Andrés ◽  
C Capdevila
Keyword(s):  
Carbon Steel ◽  
Acicular Ferrite ◽  
Medium Carbon Steel ◽  
Two Stage ◽  
Medium Carbon ◽  
Ferrite Formation ◽  
Continuous Cooling

Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals

2014 ◽  
Vol 29 (4) ◽  
pp. 254-261 ◽  
Author(s):  
Atsushi Takada ◽  
Yu-Ichi Komizo ◽  
Hidenori Terasaki ◽  
Tomoyuki Yokota ◽  
Kenji Oi ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Acicular Ferrite ◽  
Low Carbon Steel ◽  
Crystallographic Analysis ◽  
Steel Weld ◽  
Low Carbon ◽  
Ferrite Formation ◽  
Weld Metals

scholarly journals Mechanism of Acicular Ferrite Formation in Low Carbon Steel Ti–B Weld Metals with Different Oxygen Levels

2010 ◽  
Vol 96 (10) ◽  
pp. 608-613 ◽  
Author(s):  
Tomonori Yamada ◽  
Hidenori Terasaki ◽  
Yu-ichi Komizo
Keyword(s):  
Carbon Steel ◽  
Acicular Ferrite ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Ferrite Formation ◽  
Oxygen Levels ◽  
Weld Metals

scholarly journals Formation of Acicular Ferrite in Mg Treated Ti-bearing C–Mn Steel

2015 ◽  
Vol 55 (7) ◽  
pp. 1468-1473 ◽  
Author(s):  
Ming-ming Song ◽  
Bo Song ◽  
Chun-lin Hu ◽  
Wen-bin Xin ◽  
Gao-yang Song
Keyword(s):  
Acicular Ferrite ◽  
Mn Steel
Sign in / Sign up

Export Citation Format

Share Document