Experimental investigation of axially loaded steel fiber reinforced high strength concrete-filled steel tube columns

2015 ◽  
Vol 22 (6) ◽  
pp. 2287-2296 ◽  
Author(s):  
Yi-yan Lu ◽  
Na Li ◽  
Shan Li ◽  
Hong-jun Liang
Keyword(s):  
Experimental Investigation ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Tube ◽  
Fiber Reinforced ◽  
Concrete Filled Steel Tube ◽  
Strength Concrete ◽  
Axially Loaded

Behaviour of Concrete Filled Steel Square-Tube Stub Column with Steel-Fiber Reinforced High Strength Concrete

2013 ◽  
Vol 663 ◽  
pp. 125-129 ◽  
Author(s):  
Chang Sik Choi ◽  
Hyung Suk Jung ◽  
Hyun Ki Choi
Keyword(s):  
High Strength Concrete ◽  
Steel Fiber ◽  
Load Capacity ◽  
Compressive Load ◽  
High Strength ◽  
Steel Tube ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Strength Concrete ◽  
Stub Columns

The paper presents an experimental study on the behavior of axial loaded concrete-filled steel square-tube stub columns with high strength fiber reinforced concrete until failure. Four specimens were tested to investigate the effect of high strength concrete on the load carrying capacity of the concrete-filled steel square-tube stub columns. The effect of the presence of steel fiber in high strength concrete which filled in the steel tube was also investigated. The main parameters in the tests were: (1) the strength of concrete (30 Mpa and 100 Mpa), and (2) the use of reinforcing steel fiber in concrete (plain high strength concrete and steel fiber high strength concrete). The main purpose of these tests were three-step: (1) to describe a series of tests on composite stub columns, (2) to analyze the influence of several parameters, and (3) to compare the accuracy of the predictions by using the specifications in the code (ACI and EC4 etc.) for the design of high-strength composite columns. Experimental results indicate that the high strength of concrete and use of steel-fiber in concrete had significant influence on both the axial compressive load capacity and the ductile of the steel square-tube stub columns.

Experimental study on the seismic performance of composite columns with an ultra-high-strength concrete-filled steel tube core

2019 ◽  
Vol 23 (4) ◽  
pp. 794-809
Author(s):  
Yong Yang ◽  
Xing Du ◽  
Yunlong Yu ◽  
Yongpu Pan
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
High Strength Concrete ◽  
High Strength ◽  
Steel Tube ◽  
Load Bearing Capacity ◽  
Concrete Filled Steel Tube ◽  
Composite Columns ◽  
Strength Concrete ◽  
Steel Strips

The ultra-high-strength concrete-encased concrete-filled steel tube column consists of a concrete-filled steel tube core and a rectangle-shaped reinforced concrete encasement. This article presents the seismic performance analysis of ultra-high-strength concrete-encased concrete-filled steel tube columns subjected to cyclic loading. Based on the measured load-lateral displacement hysteresis curves of six ultra-high-strength concrete-encased concrete-filled steel tube columns and two conventional RC columns, the seismic behaviours, such as the ductility, energy dissipation, stiffness and load-bearing capacity, were analysed. The effects of the arrangement of the stirrups and the layout of the prestressed steel strips on the seismic performance of the composite columns were critically examined. The test results indicated that the ductility and energy dissipation performance of the ultra-high-strength concrete-encased concrete-filled steel tube columns were increased by 74.8% and 162.7%, respectively, compared with the conventional columns. The configuration of the prestressed steel strip increased the ductility of the composite column by 28.9%–63% and increased the energy consumption performance by 160.2%–263.3%. By reducing the stirrup spacing and using prestressed steel strips, the concrete-filled steel tube core columns could be effectively confined, leading to a great enhancement in ductility, energy dissipation, stiffness and load-bearing capacity.

Calculation Method of Crack Width of Steel Fiber Reinforced High-Strength Concrete Beams under Fatigue Load

2012 ◽  
Vol 238 ◽  
pp. 190-195
Author(s):  
Dan Ying Gao ◽  
Ming Zhang
Keyword(s):  
Fatigue Crack ◽  
Calculation Method ◽  
High Strength Concrete ◽  
Crack Width ◽  
Steel Fiber ◽  
Concrete Beams ◽  
High Strength ◽  
Fiber Reinforced ◽  
Fatigue Load ◽  
Strength Concrete

Based on the fatigue test, 8 steel fiber reinforced high-strength concrete beams are studied, the influencing factors of crack width are discussed in the paper, and the calculation method of crack width under fatigue load is investigated. Based on the analysis of test results, the formulas are put forward. The results show that adding steel fiber into the high-strength concrete beams can prevent the development of the fatigue crack, fatigue crack widths are decreased by 26.0%~121.0% and the calculated values have good agreement with test date.

J Integral of Steel Fiber Reinforced High Strength Concrete

2012 ◽  
Vol 476-478 ◽  
pp. 1568-1571
Author(s):  
Ting Yi Zhang ◽  
Guang He Zheng ◽  
Ping Wang ◽  
Kai Zhang ◽  
Huai Sen Cai
Keyword(s):  
High Strength Concrete ◽  
Fiber Volume Fraction ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Bending Test ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Three Point Bending ◽  
Strength Concrete

Through the three-point bending test on the specimens of steel fiber reinforced high strength concrete (SFHSC), the effects of influencing factors including water-cement ratio (W/C) and the fiber volume fraction (ρf) upon the critical value(JC) of J integral were studied. The results show that the variation tendencies of JC are different under different factors. JC meets the linear statistical relation with W/C, ρf, respectively.

Sign in / Sign up

Export Citation Format

Share Document